产品展示
QG-1 金相试样切割机 35mm 50mm金相制样切割机 380V切割机
点击次数：516发布时间：2015/5/19 13:45:18
更新日期：2024/9/5 17:34:40
所 在 地：中国大陆
产品型号：
优质供应
详细内容
QG-1 金相试样切割机
Metallographic Specimen Cutter
用途
QG-1型金相试样切割机（以下简称切割机）是利用高速旋转的薄片砂轮秋街区金相试样，它广泛的适用于金相实验室切割各种金属材料。由于本级可附有冷却装置，用来带走切割时所产生的热量，因而避免了试样遇热而改变金相组织。
本切割机除能切割各种金属材料以外，还能切割非金属材料如塑料、胶管等。
结构特征概述
Model QG-1 Metallographic Specimen Cutter, which cuts off metallographic specimens by means of thin abrasive wheel revolving at high speed is widely applicable for cutting metallc materials in melallography laboratory, Since a cooler is attacted to the machine to carry away the heat produced during cutting metallogapic structure of the specimen will not undergo any change due to overheating.
Beside cutting various metallic materials, the machine can also be used to cutnonmentallic mae-terials such as plastics rubber tubed, etc.
QG-1 50mm技术参数
| 1.切割截面 Maximum cut-off cross-section | 50x50mm |
| 2.砂轮机规格 Abrasive wheel | 300x2x32mm |
| 3.转速 Revolving speed | 2800r/min |
| 4.电动 Motor | 1.1kw, Y90L-2,3相 PH380V， 50Hz |
| 5.外形尺寸 Overall dimensions | 650x450x400mm |
| 6.净重 Net Weight
| 60kg |
QG-1 35mm 技术参数
| 1.切割截面 Maximum cut-off cross-section | 35x35mm |
| 2.砂轮机规格 Abrasive wheel | 250x2x32mm |
| 3.转速 Revolving speed | 2840r/min |
| 4.电动 Motor | 1.1kw, 3相PH380V， 50Hz |
| 5.外形尺寸 Overall dimensions | 650x450x400mm |
| 6.净重 Net Weight | 60kg |
