产品展示
QG-3A封闭式试样切割机 60*60*80防水电机 环保型金相切割机
点击次数：403发布时间：2015/5/30 23:23:22
更新日期：2024/9/5 17:34:40
所 在 地：中国大陆
产品型号：
品牌名称：邦亿
优质供应
详细内容
Metallographic Specimen Cutter
本机是用于切割一般金相、岩相试样材料，机内设有冷却通道及开关，再切割时可通人配置好的冷却液来带走在切割中产生的 热量，避免试样过热而烧伤组织。该机操作使用方便，安全可靠，是实验室制样必备设备。
Brief Description
The spindle shaft of the abrasive wheel is fitted on the rocker arm bearing block, it is driven by the V-belt. Loose or tight of the V-bell can be adjusted by deflecting the tensioner.
Swinging motion of the swinging arm will convert to the feed motion of the abrasive wheel. Whether the cutting feed quick or slow will depend on the swinging of the manual swinging arm. Above the working table is the specimen quick clamping device. Pressure bar can move up and down. Clamp and use easily and intelligently .There are cooling liquid passing in the pressure bar. Under the pressure bar there is the working clamp port.
It has “V” slot for Clamping the specimen. Adiaphanous organic glass protective cover mounted on the working table is used for observing and Protecting when cutting .There are in –out water channel and cooling and cooling liquid switch in the cutter. The consumption of the cooling liquid could be adjusted or cut off at will according to the cutting requirements.
Cooling water tank is used for Storing, the cooling liquid which have be collocated can be used circularly. You should select the fine lubricating property coolant to collocate the cooling liquid and no to the ordinary running water as the cooling liquid.
For Cutting the specimen of the rock or ceramic materials , you must use the diamond wheel blade.(The diamond wheel blade is available of special order)
技术参数
| 1.切割宽度 Maximum cut-off width | 50mm |
| 2.切割高度 Maximum cut-off height | 70mm |
| 3.切割面直径 Maximum cut-off cross-section diameter | Φ50mm |
| 4.砂轮机规格 Abrasive wheel | 250x2.0x32mm |
| 5.电动机 Motor | Y80L-1.1kw |
| 6.外形尺寸 Overall dimensions | 600x620x470mm |
| 7.净重 Weight | 75kg |
