产品展示
优质供应
详细内容
小型实验室喷雾干燥机，有机溶剂喷雾干燥机仪器说明：
Mainly applicable to the University, Institute of food ａnd pharmaceutical chemical industry laboratory production of micro particles of all solutions such as emulsion, suspension has broad applicability, suitable for heat sensitive materials such as drying of biological products, bio pesticides, enzyme preparation, high temperature is only because of the sprayed material is mist particle size in the spray, so just instant heating, can keep the active material is not damaged after drying ａnd still maintain its active ingredients.
主要适用于高校、研究所和食品医药化工企业实验室生产微量颗粒粉末，对所有溶液如乳浊液、悬浮液具有广谱适用性, 适用于对热敏感性物的干燥如生物制品、生物农药、酶制剂等，因所喷出的物料只是在喷成雾状大小颗粒时才受到高温，故只是瞬间受热，能保持这些活性材料在干燥后仍维持其活性成份不受破坏。
联系人：刘萍
联系电话：150 2109 3014
企业QQ:2851513073
小型实验室喷雾干燥机，有机溶剂喷雾干燥机仪器主要特征：
采用彩色大触摸屏操作，全自动控制和手动控制相结合，十段程序控温，自带记忆功能，国内：
2.全自动控制：一键式开机，设定喷雾工艺参数后，温度到达预定温度，蠕动泵自行启动，触摸屏上显示运行动画，运行流程清晰显示；关机时只需按停止键，机器自动安全关机。
3.手动控制：如需在实验过程对工艺参数进行调整，可方便切换至手动状态，整个实验过程彩色触摸屏动态显示（动画）。
4.关机保护功能：关机时只需按停止键，机器除风机外立即停止运行，保证设备不会因为误操作（强行关风机）而导致加热部分烧坏。
5.喷雾、烘干及收集系统采用透明的优质高硼硅耐热玻璃材料制造，使得喷雾干燥过程在无污染及*稳定的环境下进行，且使整个喷雾干燥实验进程可直接观察，为科研人员掌控实验进程及实验结果提供了极大的便利,并能及时发现解决问题。所有玻璃元件易拆卸，易清洗。
6.小型喷雾干燥机内置进口全无油空压机，喷粉的颗径呈正态分布，流动性非常好，而且噪音非常低，小于60db，符合国家实验室噪音标准；
7.二流体喷雾的雾化结构，整机采用优质不锈钢材料精密制造，设计紧凑，无需附属设备，方便使用，历久如新。
8.为了满足用户在实验范围调节各项参数的要求，在干燥温度控制的设计上采用实时调控PID恒温控制技术，使全温区控温准确，加热控温精度±1℃。
9.为了保持样品的纯净，配备了进风口过滤器。
10.进料量可通过进料蠕动泵调节，*小样品量可达50ml。磁力搅拌器可选
11.干燥后的成品干粉，其颗粒度较均匀，95%以上的干粉在同一颗粒度范围。
12.小型喷雾干燥机针对黏性物料，设有喷咀清洁器（通针），在喷咀被堵塞时，会自动清除，通针的频率可自动调整；
13.创新的塔壁吹扫装置，物料回收率更高。
14.自动清扫功能，大大加强干燥样品回收率。
15.干燥塔自动清洗功能，无需手动清洗，大大节省实验时
联系人：刘萍
联系电话：150 2109 3014
企业QQ:2851513073
The use of large color touch screen operation, automatic control ａnd manual control of the combination of ten temperature control procedures, with memory function, the only:
2 automatic control: one button start, set spray process parameters after the temperature reaches a predetermined temperature, the peristaltic pump to start operation, touch screen animation display, clear display operation process; shutdown just press the stop button, the machine automatically shut down safety.
3 manual control: if you need to adjust the process parameters in the experimental process, you can easily switch to the manual state.
4 shutdown shutdown protection function: just press the stop button, the machine in addition to the wind outside the machine immediately stop running, to ensure that equipment is not because of misoperation (forced off fan) to burn heating part.
5, spray drying ａnd collecting system made of transparent high heat-resistant borosilicate glass, the spray drying process in no pollution ａnd the most stable environment, ａnd make the whole process of spray drying experiment can directly observe the progress of the experiment, ａnd the experimental results provide a great convenience for researchers to control, ａnd can be found in time to solve the problem. All glass components are easy to disassemble ａnd clean.
6 mini spray dryer built-in imported oil free air compressor, the powder particle size distribution, liquidity is very good, ａnd the noise is very low, less than 60dB, meet the noise standards of national laboratory;
7 two fluid spray atomization structure, precision manufacturing machine adopts high quality stainless steel material, compact design, without ancillary equipment, convenient use, lasting.
8 in order to meet the requirements of the user to adjust the parameters in the experimental range, in the design of the drying temperature control using real-time control of PID temperature control technology, so that the whole temperature zone temperature control accuracy, heating temperature control accuracy of + 1.
9 in order to maintain the purity of the sample, equipped with air inlet filter.
10 feed quantity can be adjusted by feeding peristaltic pump, the minimum sample size up to 50ml. Magnetic stirrer optional
11 dry finished powder, its particle size is more uniform, more than 95% of the dry powder in the same particle size range.
12 small spray dryer for viscous material, is provided with a nozzle cleaner (needle), is blocked at the nozzle, will automatically remove the needle, the frequency can be adjusted automatically;
13 innovative tower wall purging device, material recovery rate is higher.
14 automatic cleaning function, greatly enhance the recovery rate of dry samples.
15 drying tower automatic cleaning function, without manual cleaning, greatly saves the experiment
技术参数：
联系人：刘萍
联系电话：150 2109 3014
企业QQ:2851513073
采用全自动控制与手动控制双重控制模式，整个实验过程彩色触摸屏动态显示（动画）
2、进风温度控制：30℃～400℃
3、出风温度控制：30℃～200℃
4、蒸发水量：1500mL/H～2000ml/h
5、进料量：蠕动泵可调为2000ml/h
6、*小进料量：50mL
7、可升级成双级分离收集系统
8、实时PID控温技术，进风温度和出风温度实时在线显示，控温精度±0.5℃
9、干燥时间：0.8～1.0S
10、机器具有误操作保护功能，当风机和加热器开关使用顺序按错时，机器自动提醒，防止新手误操作顺坏机器。
11、小型喷雾干燥机具有关机保护功能：关机时只需按停止键，机器除风机外立即停止运行，保证设备不会因为误操作（强行关风机）而导致加热部分烧坏。
12、彩色LCD触摸屏参数显示：进风口温度/出风口温度/蠕动泵转速/风量/通针频率
13、喷嘴口径：0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm可选，并可根据要求定制
14、设有喷咀清洁器（通针），在喷咀被堵塞时，会自动清除，通针的频率可自动调整
15、喷雾干燥机整机全不锈钢制作,二流体喷雾的雾化结构，喷雾、烘干及收集系统采用透明的优质高硼硅耐热玻璃材料制造
16、内置进口全无油空压机，喷粉的颗径呈正态分布，流动性好，而且噪音非常低，符合国家实验室噪音标准；
17、智能型控制系统，取代市场上的PLC控制，稳定性更强
18、时间设定功能：用户可以自行设定机器的工作时间，无需人工看守，工作时间结束机器停止工作，无需人工看守，极大的节省客户做实验的宝贵时间。
19、风机自动停止功能：仪器工作结束后，应该保留风机工作状态，以便玻璃部分冷却，本机器通过智能程序设定，当进口温度低于30度时，风机自动关闭，无需人工手动关闭风机。
20、整机功率：3.8KW/220V
21、塔壁吹扫装置，物料得率更高
22、喷雾头冷却装置（可选）
23、可直接升级成应用于有机溶剂物料干燥的氮气循环系统
24、设备尺寸：1380mm(高）×770mm（长）×590mm（宽）
2, air intake temperature control: 30 degrees C ~ 400 C
3, air temperature control: 30 degrees C ~ 200 c
4, evaporation water: 1500mL/H ~ 2000ml/h
5, the maximum feed quantity: peristaltic pump adjustable maximum of 2000ml/h
6, the minimum feed quantity: 50mL
7, double stage separation collection system upgrade
8, real-time PID temperature control technology, air temperature ａnd air temperature real-time online display, temperature control accuracy of + 0.5
9, drying time: 0.8 ~ 1.0S
10, the machine has the function of misoperation protection, when the fan ａnd the heater switch in the wrong order, the machine automatically reminded to prevent the wrong operation of the new machine.
11, small spray dryer has shutdown shutdown function: just press the stop button, the machine in addition to the wind outside the machine immediately stop running, to ensure that equipment is not because of misoperation (forced off fan) to burn heating part.
12, color LCD touch screen parameters: air inlet temperature / outlet temperature / peristaltic pump speed / air volume / needle frequency
13, nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, ａnd can be customized according to requirements
14, a nozzle cleaner (needle), is blocked at the nozzle, will automatically remove the needle, the frequency can be adjusted automatically
15, spray drying machine made of stainless steel, two fluid spray atomization structure, spray, drying ａnd collection system using transparent high-quality borosilicate heat-resistant glass material
Built in 16, imports of oil free air compressor, the powder particle size distribution, good fluidity, ａnd the noise is very low, in line with the noise standard of national laboratory;
17, intelligent control system to replace the PLC control on the market, more stable
18, the time setting function: users can set their own machine working time without manual work over time to watch, the machine stops working, without manual guard, greatly save valuable time customers to do experiments.
Automatic stop function: 19, fan instrument after the end of the work, should keep the fan working condition, so that the glass part cooling, the machine through the intelligent program setting, when the inlet temperature is below 30 degrees, automatically turn off the fan, without having to manually turn off the fan.
20, the whole machine power: 3.8KW/220V
21, tower wall blowing device, material yield is higher
22, spray head cooling device (optional)
23, can be directly upgraded to be used in organic solvent material dry nitrogen circulation system
24, equipment size: 1380mm (high) * 770mm (length) * 590mm (wide)
