产品展示
优质供应
详细内容
性能特点
功能强大,操作简单;测量准确,使用安全;
检测所有刹车油;具有自动关机功能;
可测试DOT3/4/5刹车油。
产品指示说明
绿:电量OK/不含水;
绿/黄:含水量低于1%;
绿/黄/黄:含水量接近2%;
绿/黄/黄/红:含水量接近3%,建议更换制动液;
绿/黄/黄/红/红:含水量高于4%,危险,必须立刻更换制动液。
注意:以上数据仅供参考;
电池:1节七号AAA电池,电池盖按照测试笔上的箭头指示方向来打开。
JDiag FT123 Brake Fluid Tester is used to detect the quality of brake fluid, brake fluid moisture percentage of the test results will be showen by 5 LED lights.
According to the change in conductivity to determine the water changes in brake oil, through the light-emitting diode, FT123 clearly shows the degree of moisture, high moisture content will lead to lower boiling point, a ecting the braking performance. Red light means the brake oil needs to be replaced, green light means the oil state is good, and yellow light means the oil state is acceptable.
Features
Powerful function with ease operation
Accurate measurement, safety;
Detect all types brake oil
Automatically power on
DOT 3/4/5 Brake Fluid Testable
Product Instructions
Green: Battery OK/State Good
Green/Yellow: Water content less than 1%
Green/Yellow/Yellow: Water content close to 2%
Green/Yellow/Yellow/Red: Water content close to 3%, recommended to replace the brake fluid
Green/Yellow/Yellow/Red/Red: Water content higher than 4%, Dangerous, replace the brake fluid immediately
Notice: The above data is for reference only
Battery: AAA X1(not Included in package), battery cover is opened in the direction indicated by the arrow.