TOTAL JARYTHERM DBT300℃  ARYTHERM® DBT Heat transfer circuit Synthetic heat transfer fluid, made from a blend of dibenzyltoluene isomers. APPLICATIONS Heat transfer installations by fluid circulation  Operating from 0°C to + 350 °C in the mass (370 °C in the film) without air contact. JARYTHERM® DBT is used chiefly in the chemical ａnd plastics transformation industries (barrel extruders). SPECIFICATIONS  ISO 6743/12 class L-QD ADVANTAGES Long life time Working safety  Excellent stability to thermal cracking Authorizes lengthy periods without the formation of carbon deposits which can foul the circuit. Preserves the heat exchange characteristics of the installation.  Resistance to oxidation A thermal fluid must show good reistance to oxidation, even with limited exposure to oxygen in the air. JARYTHERM® DBT offers this characteristics. JARYTHERM® DBT CARACTERISTIQUES TYPES METHODS UNITS 20 °C 100 °C 200 °C 300 °C Specific density ISO 3675 kg/m3 1.043 0.987 0.914 0.834 Kinematic viscosity ISO 3104 mm2 /s 50 3 0.82 0.44 Specific heat capacity - kJ/kg °C 1.60 1.81 2.10 2.51 Thermal conductivity - W/m °C 0.128 0.121 0.113 0.105 Above characteristics are mean values given as an information. CARACTERISTIQUES TYPES METHODS UNITS JARYTHERM® DBT Flash point OC ISO 2592 °C 200 Fire point ISO 2592 °C 230 Pour point ISO 3016 °C - 24 Boiling point (under 760 mm of mercury) - °C 380 Operating range - - in the mass °C 0 / + 350 - in the film °C 370 Above characteristics are mean values given as an information. A few useful conversion factors: 1 Kcal/kg. °C = 4184 J/Kg. °C 1 Kcal/m.h. °C = 1.162 W/m. °C 1 mm Hg = 133 Pa JARYTHERM® DBT is registered trademark of ARKEMA