克鲁勃SYNTHESO D 320 EP  SYNTHESO D EP oils Synthetic high-performance gear oils This product series is discontinued – please use Klübersynth GH 6 as replacement Product information Kinematic viscosity in mm²/s Temperature in °C By operating oil temperature, we understand the oil sump temperature or the temperature of the injected oil. The expected operating oil temperature is calculated by determining the gear＇s thermal economy, taking into account the produced losses or, in the case of gears already installed, by measuring the temperature. It might be required to ｓelect a lower viscosity to ensure lubricant supply during a cold start ａnd at low ambient temperatures. It is necessary to check in each individual case the viscosity at the existing starting temperature (especially in the case of circulation lubrication), or to test the component at the expected starting temperature (especially in the case of immersion lubrication). SYNTHESO D EP oils Synthetic high-performance gear oils This product series is discontinued – please use Klübersynth GH 6 as replacement Product information SYNTHESO D EP oils, Art-No. 012056, 012125, 012068, en Edition 07.12.2013 [replaces edition 16.10.2012] Material safety data sheets Material safety data sheets can be downloaded or requested via our website www.klueber.com. You may also obtain them through your contact person at Klüber Lubrication. Pack sizes SYNTHESO D 220 EP SYNTHESO D 320 EP SYNTHESO D 460 EP Canister 20 kg - - - Drum 180 kg + + + Product data SYNTHESO D 220 EP SYNTHESO D 320 EP SYNTHESO D 460 EP Article number 012056 012125 012068 Upper service temperature 100 °C / 212 °F 100 °C / 212 °F 100 °C / 212 °F Lower service temperature -30 °C / -22 °F -30 °C / -22 °F -30 °C / -22 °F ISO viscosity grade, DIN ISO 3448 220 320 460 Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 38 mm²/s approx. 60 mm²/s approx. 78 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 220 mm²/s approx. 320 mm²/s approx. 460 mm²/s Density, DIN 51757, 20 °C approx. 1.05 g/cm³ approx. 1.05 g/cm³ approx. 1.05 g/cm³ Viscosity index, DIN ISO 2909 >= 210 >= 230 >= 230 Pour point, DIN ISO 3016 <= -35 °C <= -30 °C <= -30 °C Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 200 °C >= 200 °C >= 200 °C Minimum shelf life from the date of manufacture - in a dry, frostfree place ａnd in the unopened original container, approx. 36 months 24 months 24 months