FUCHS RENOLIN UNISYN CLP 220  RENOLIN UNISYN CLP – fully synthetic, high-performance EP/AW gear oils based on polyalphaolefin (PAO) CLP-HC oils/PAO-synthetic Product name Description Density at 15°C [kg/m3 ] FLP. Cleveland [°C] Kin.Visc. at 40°C [mm2 /s] Kin.Visc. at 100°C [mm2 /s] VI Viscosity index Pourpoint [°C] Main application area RENOLIN UNISYN CLP 68 Fully-synthetic gear ａnd circulating oils with excellent thermal ａnd aging stability, very high viscosity index (shear-stable), outstanding low-temperature behavior, very good flow behavior at low temperatures, excellent air release properties ａnd foaming behavior, good protection against micropitting, excellent FE8 performance, good demulsifying properties, free from zinc ａnd silicone oil. The RENOLIN UNISYN CLP series of oils surpass the minimum requirements of CLP-HC gear oils according to DIN 51517, Part 3 together with DIN 51 502, ISO 6743-6 ａnd ISO 12925-1: CKC, CKD, CKE, AISE 224, David Brown S1.53.101. Approved by leading gearbox manufacturers. 848 240 68 10.7 147 –56 For the lubrication of bearings ａnd gearboxes which are subject to high thermal loads. RENOLIN UNISYN CLP oils are also suitable for lubricated-for-life applications ａnd in gearboxes with extended oil change intervals. Miscible ａnd compatible with mineral oils. Excellent low-temperature characteristics, high, shear-stable viscosity index. RENOLIN UNISYN CLP 320 is used in wind turbine gears worldwide ａnd is an approved gear oil for wind turbines. (Refer to product information 4-1104* for further details) RENOLIN UNISYN CLP 100 851 250 100 14.5 150 –53 RENOLIN UNISYN CLP 150 853 250 150 19.6 150 –45 RENOLIN UNISYN CLP 220 854 260 220 26.7 155 –42 RENOLIN UNISYN CLP 320 860 260 320 35.0 155 –42 RENOLIN UNISYN CLP 460 861 300 460 45.6 155 –39 RENOLIN UNISYN CLP 680 862 300 680 62.2 160 –33 RENOLIN UNISYN CLP 1000 864 300 1.000 84.0 165 –27