FUCHS RENOLIN XtremeTemp 46 RENOLIN XtremeTemp – high-performance multigrade hydraulic oils based on new generation of base oils – shear stable, long lifetime RENOLIN B HVI – high-performance demulsifying AW/EP hydraulic oils with a high viscosity index, Denison HF0 approved HVLP oils (demulsifying) HVLP oils (demulsifying) Product name Description Density at 15 °C kg/m3 Flash point Cleveland °C Kine matic viscosity at 40 °C mm2 /s Kine matic viscosity at 100 °C mm2 /s Viscosity index VI Pourpoint °C Main application area RENOLIN B 3 VG 10 General lubricating ａnd hydraulic oils with good aging resistance ａnd additives for improved corrosion protection. Good viscosity-temperature behavior, good wear protection, demulsifying (water-repellent), air release, contain zinc. The RENOLIN B range meets ａnd exceeds the minimum requirements of HLP hydraulic oils as per DIN 51 524-2. ISO 6743/4, HM ISO 6743/6, CKC ISO 11158, HM Denison HF0, HF1, HF2 850 178 10 2.6 96 -42 As lubricating oils, particularly as hydraulic oils if good resistance to aging, wear protection ａnd demulsifying properties are required. Universal hydraulic oils for all hydraulic systems, even if thermally stressed. Excellent filtration behavior. (Refer to PI* 4-1207 for further details) RENOLIN B 5 VG 22 863 200 22 4.4 107 -27 RENOLIN B 10 VG 32 876 205 32 5.5 109 -24 RENOLIN B 15 VG 46 875 210 46 6.9 105 -24 RENOLIN B 20 VG 68 881 224 68 8.8 100 -24 RENOLIN B 30 VG 100 883 232 100 11.1 96 -18 RENOLIN B 40 VG 150 887 224 150 14.5 94 -15 Product name Description Density at 15 °C kg/m3 Flash point Cleveland °C Kine matic viscosity at 40 °C mm2 /s Kine matic viscosity at 100 °C mm2 /s Viscosity index VI Pourpoint °C Main application area RENOLIN B 15 HVI Hydraulic ａnd general lubricating oils (machine oils) with a high viscosity index ａnd additives to improve aging behavior, corrosion protection ａnd wear protection. The products of the RENOLIN B HVI range are HVLP hydraulic ａnd circulating oils according to DIN 51 524-3, mineral oilbased, demulsifying (waterrepellent) ａnd contain zinc. ISO 6743/4, HV ISO 11158, HV Denison HF0, HF1, HF2 859 180 15 3.8 151 -45 RENOLIN B HVI oils are suitable for all hydraulic systems, especially when a high viscosity index is specified or if excess viscosity during start-up or insufficient viscosity at operating temperature is a problem. High VI provides multigrade characteristics. Energy saving through high efficiency. (Refer to PI* 4-1222 for further details) RENOLIN B 32 HVI 871 178 32 6.3 152 -48 RENOLIN B 46 HVI 879 186 46 8.1 149 -45 RENOLIN B 68 HVI 868 240 68 11.0 153 -33 Product name Description Density at 15 °C kg/m3 Flash point Cleveland °C Kine matic viscosity at 40 °C mm2 /s Kine matic viscosity at 100 °C mm2 /s Viscosity index VI Pourpoint °C Main application area RENOLIN XtremeTemp 32 Universal, high-performance hydraulic oils with high viscosity index ａnd increased shear stability (VI ≥ 180). Based on special hydrogenated base oils, very good aging behavior, long lifetime, excellent corrosion protection ａnd very good wear protection, fulfill ａnd surpass DIN 51 524-3, HVLP, ISO 6743/4, HV ISO 11158, HV Denison HF0, HF1, HF2 RENOLIN XtremeTemp Plus with additional additives for prevention of stick-slip. 861 216 32 6.9 185 -33 Universal high-performance multigrade hydraulic oil for stationary ａnd mobile hydraulic systems, improvement of efficiency, increasing change intervals. Multigrade characteristics through high, shear-stable viscosity index. Energy ａnd fuel saving through high efficiency. (Refer to PI* 4-1088 for further details) RENOLIN XtremeTemp 46 853 234 48 9.3 180 -34 RENOLIN XtremTemp 32 Plus 861 216 32 6.9 183 -33 RENOLIN XtremeTemp 46 Plus 855 234 48 9.3 181 -34