Light-coloured, high-viscosity adhesive lubricant with white solid lubricants for Open Gears

Performance Features

• temperature range: 0/+140 °C / +32/+280 °F; recommended application temp.: > +10 °C/+ 50 °F
• excellent wear protection
• very good dry running properties
• unlimited suitability for kiln ａnd mill drives
• no self-ignition on the hot kiln shell
• thick lubricating film
• very good lubricating film stability on the stationary tooth flank
• free of solvent ａnd bitumen

Description

CEPLATTYN GT 10 is a high-viscosity adhesive lubricant for heavy-duty Open Gears, e.g. on kilns, mills ａnd driers in the raw materials industry. CEPLATTYN GT 10 is based on a synthetic base oil, new types of additives, ａnd a combination of white, reaction-effective solid lubricants. This combination guarantees an extraordinarily good wear protection ａnd an extremely high lubricant film stability. CEPLATTYN GT 10 together with CEPLATTYN GT P (Primer) ａnd CEPLATTYN GT RN (Running-In) represents the FUCHS LUBRITECH Multi-Phase Lubrication.

Field of application

CEPLATTYN GT 10 has been especially developed for the application on Open Gears under critical operating conditions, such as low-speed kiln drives with increased tooth flank temperatures, mill drives with extreme drive power, ａnd drives which are frequently operated under start-s conditions. CEPLATTYN GT 10 includes flame-retarding substances reducing the danger of ignition, e.g. on the hot kiln shell (up to 400 °C). Furthermore CEPLATTYN GT 10 has a restricted flowability outside the meshing ａnd is thus prevented to a large extent from leaving the gear guard. As opposed to conventional fluids CEPLATTYN GT 10 develops a thick lubricating film on the tooth flank which does not flow off of the metal surface, not even after a spage of the equipment. Thus CEPLATTYN GT 10 reliably protects from wear in the starting phase of the equipment which can happen with conventional fluids. The high portion of reaction-effective white solid lubricants prevents a seizure of the tooth flanks even in unfavorable lubricating ａnd meshing conditions. CEPLATTYN GT 10 meets the requirements of AGMA 9005-E01 / D-2 ａnd has been approved by FLSmidth, KHD Humboldt Wedag, Metso, ａnd Outotec.

Method of application

CEPLATTYN GT 10 is suitable for the application in immersion bath, circulation lubrication ａnd spraying systems. In terms of spraying applications a heating system is recommended with ambient temperatures below +10 °C/+50 °F.

Note

Shelf life: 24 months