Molybdenum disulfide bonded film lubricant

Performance Features

• temperature range: -180 / +250 °C
• produces a dry, strongly adhering lubrication film
• carries very high loads
• is resistant to mineral oils after heat curing
• ensures a constant coefficient of friction
• improves the wear-in behaviour ａnd the load carrying ability of oil- or grease-lubricated machine elements
• offers clean assembly

Description

GLEITMO 920 is an air drying bonded film lubricant, solvent-based with organic Binder. It can be heat-cured, ａnd then it is resistant to mineral oils. GLEITMO 920 forms on metal surfaces a firmly adhering, non-ageing molybdenum disulfide bonded film lubricant with good lubricating properties.

Field of application

The main application is at low sliding speeds ａnd high loads as well as in combination with oil ａnd greases.Examples of application: Wear-in ａnd emergency lubrication of differential gears ａnd bearings, dry lubrication of threaded spindles, cores of magnets, wire clamps, adjustable threads ａnd mechanisms, bolt joints, sliding planes, threads, nuts, tension pins.

Method of application

Compressed air ａnd airless spraying systems are suited best. Immersion is expedient for large quantities of small parts. Due to uneven coating thickness, painting by brush or roller is recommended only if spraying or immersion is not possible. In the case of spraying installations, containers with agitator are recommended. Sliding surfaces should be carefully degreased with solvent ａnd allowed to dry. To increase adhesion ａnd therefore the lifetime of the coating, pretreatment of the surfaces is recommended by sand-blasting or phosphatising.

Note

Stir well before use! Shelf-life: 18 months in closed original container at ambient temperature.