2-component water based PTFE solid film lubricant

Performance Features

• Temperature range for use: -70/+250 °C
• forms a dry, firmly adhering lubricant film
• adheres very well on rubber materials (e.g. NBR, EPDM…)
• is environmentally ａnd user harm-less
• largely resistant to water, mineral oils ａnd fuels
• offers exceptional non-stick ａnd separating characteristics
• facilitates the assembly of parts with robots (e.g. sealing rings)
• can be used to produce coloured coatings
• contains UV-additive for coating control

Description

GLEITMO RLC 3100 is an air drying 2-component solid film lubricant having PTFE as a constituent for lubrication efficiency. The product forms a dry lubricating film, which is distinguished by its excellent lubricating effect ａnd high degree of abrasion resistance. GLEITMO RLC 3100 is largely resistant to mineral oils ａnd fuels.

Field of application

GLEITMO RLC 3100 is used for the lubrication of rubbers ａnd polymers materials. GLEITMO RLC 3100 shows excellent adhesion behaviour on many materials. GLEITMO RLC 3100 can be coloured with colour additives from the “GLEITMO Colour” range in order to achieve coloured coatings on o-rings.

Method of application

The parts to be coated must be thoroughly degreased with a solvent. The component 1 (K1) should be stirred well before use.Mixing ratio: 100 parts [wt%] GLEITMO RLC 3100 K12 parts [wt%] GLEITMO RLC 3100 K2The mixture (K1+K2) can be thinned with water according to the application requirements.Pot life: It is recommended to use the batch within a range of 3h.Coating is carried out by spraying or using the dipping method (mass ware). In order to achieve quicker drying ａnd improved adhesion of the coating, preheating of the parts to about 70-80 °C before coating has proved to be effective.

Note

Protect from freezing !Stir well before use !Shelf life: 12 month in closed original container at room temperature.