产品展示
美孚SHC1000合成齿轮油
点击次数：112发布时间：2018/5/4 15:50:14
更新日期：2018/9/29 13:55:33
所 在 地：中国大陆
产品型号：
优质供应
详细内容
Mobil SHC Gear Series lubricants are part of the Mobil SHC line of products that are recognized ａnd appreciated around the world for innovation ａnd outstanding performance. These synthetic products, pioneered by our research scientists, symbolize the continuing commitment to using advanced technology to provide lubricants with excellent balanced performance. A key factor in the development of Mobil SHC Gear Series was the close contacts between our scientists ａnd application specialists with key OEMs to ensure that our product offering would provide exceptional performance with rapidly evolving industrial gear designs ａnd operation. Not least among the benefits shown in work with OEMs is the ability to resist micropitting wear which can occur with some highly loaded, case-hardened gearing applications. This cooperative work also demonstrated the all-round balanced performance benefits for the new Mobil SHC Gear technology, including a wide temperature range of application.
To address the issue of micropitting wear, our product formulation scientists designed a proprietary combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear products provide exceptional oil life ａnd deposit control ａnd resistance to thermal/oxidative ａnd chemical degradation, as well as the balance of the performance features. The patent-pending combination of synthetic base oils also provides exceptional low temperature fluidity characteristics unmatched by conventional mineral oil gear lubricants ａnd is a key benefit for remote, low ambient temperature applications. The Mobil SHC Gear Series lubricants offer the following potential benefits:
| Features | Advantages ａnd Potential Benefits |
| Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear | Helps extend gear ａnd bearing life in enclosed gear drives operating under extreme conditions of load, speed ａnd temperature Helps reduce unplanned downtime; less maintenance - especially critical for difficult to access gearboxes. |
| Excellent resistance to degradation at high temperatures | Helps extend oil life ａnd drain intervals ａnd reduce oil consumption, which can lower maintenance costs |
| Low traction | Helps reduce energy consumption ａnd lower operating temperatures |
| High viscosity index equating to reduced viscosity change with temperature | Ability to operate at both high ａnd low temperatures: especially critical in remote applications with no oil cooling or heating |
| Excellent resistance to rust ａnd corrosion ａnd very good demulsibility | Helps to ensure smooth, trouble-free operation at high temperatures or in applications subject to water contamination Excellent compatibility with a variety of soft metals |
| Excellent shear stability | Helps extend gear ａnd bearing life |
| Resistence to filter plugging, even in the presence of water | Fewer filter changes; which can help reduce maintenance costs |
| Excellent seal compatibility | Less contamination ａnd lower potential for oil leakage |
| Excellent compatibility with common gearbox materials ａnd with mineral-based gear oils | Easy changeover from many mineral products |
Applications
Application Considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out ａnd flushed to achieve the maximum performance benefits.
Mobil SHC Gear Series exceptional performance, synthetic industrial gear oils are designed to provide optimum equipment protection ａnd oil life even under extreme conditions. They are especially formulated to resist micropitting of modern, case hardened gearing ａnd can operate in both high ａnd low temperature environments. Typical applications include:
- Modern, highly loaded gearboxes used in the paper, steel, oil, textile, lumber ａnd cement industries where gear protection ａnd optimum oil life are required.
- Plastic extruder gearboxes
Mobil SHC Gear Series ISO VG 150, 220, 320, 460 ａnd 680 are approved under General Electric’s (GE) gear oil specification D50E35 for use in off-highway vehicle motorized wheel gearbox applications.
Specifications ａnd Approvals
| Mobil SHC Gear meets or exceeds the following industry specifications | 150 | 220 | 320 | 460 | 680 | 1000 |
| Meets AGMA 9005-E02 | X | X | X | X | X | |
| Meets DIN 51517 Part 3 (CLP) | X | X | X | X | X | X |
| Meets ISO 12925-1 Type CKD | X | X | X | X | X | |
| Meets ISO 12925-1 Type CKT | X | X |
| Mobil SHC Gear has the following builder approvals | 150 | 220 | 320 | 460 | 680 | 1000 |
| SIEMENS AG Flender gear units, T 7300, Table A-c, Flender Code No. | A36 | A35 | A34 | A33 | A32 | A31 |
| SEW Eurodrive SEW IG CLP HC | 150 | 220 | 320 | 460 | 680 | 1000 |
| GE Motorized Wheel | D50E35 | D50E35 | D50E35 | D50E35 | D50E35 | D50E35 |
Typical Properties
| Mobil SHC Gear Series | 150 | 220 | 320 | 460 | 680 | 1000 |
| ISO Viscosity Grade | 150 | 220 | 320 | 460 | 680 | 1000 |
| Viscosity, ASTM D 445 | ||||||
| cSt @ 40ºC | 150 | 220 | 320 | 460 | 680 | 1000 |
| cSt @ 100ºC | 22.2 | 30.4 | 40.6 | 54.1 | 75.5 | 99.4 |
| Viscosity Index, ASTM D 2270 | 176 | 180 | 181 | 184 | 192 | 192 |
| Pour Point, ºC, ASTM D 97 | -45 | -39 | -33 | -27 | -27 | -24 |
| Flash Point, ºC, ASTM D 92 | 233 | 233 | 233 | 234 | 234 | 234 |
| Brookfield @ 0ºF (-18ºC), cP, ASTM D 2983 | 41000 | 96000 | ||||
| Brookfield @ -20ºF (-28ºC), cP, ASTM D 2983 | 18200 | 35000 | 57000 | 107000 | 156000 | 500000 |
| Density 60ºF (15,6ºC), g/ml | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.87 |
| Total Acid Number, mg KOH/g, ASTM D 664 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 |
| 4 Ball EP Test, kgf, ASTM D 2783 | ||||||
| Weld Load | 200 | 200 | 200 | 200 | 200 | 200 |
| Load Wear Index | 51 | 51 | 51 | 51 | 51 | 51 |
| FZG Micropitting, FVA Proc No. 54, 90°C | ||||||
| Fail Stage | 10 | 10 | 10 | 10 | 10 | 10 |
| GFT-Class | High | High | High | High | High | High |
| FZG Scuffing, ISO 14635-1 (mod) A/8.3/90, Fail Stage | 13 | 14 | 14 | 14 | 14 | 14 |
| FZG Scuffing, ISO 14635-1 (mod) A/16.6/90, Fail Stage | Not tested | >14 | >14 | >14 | >14 | >14 |
| Copper Corrosion, 3H @ 121°C, ASTM D 130 | 1B | 1B | 1B | 1B | 1B | 1B |
| Rust protection, ASTM D665, Sea Water | Pass | Pass | Pass | Pass | Pass | Pass |
| Demulsibility of EP Oils, Free Water, ml, ASTM D 2711 | 88 | 87 | 85 | 84 | 87 | |
| Water Separability, ASTM D 1401,Time to 40/37/3 at 82ºC, minutes | 10 | 10 | 10 | 15 | 25 | 40 |
| Foaming Characteristics, ASTM D 892,Seq. II, Tendency/Stability, ml/ml | 0/0 | 0/0 | 0/0 | 20/0 | 0/0 | 0/0 |
Health ａnd Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application ａnd the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS＇s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
