产品展示
优质供应
详细内容
| RATAK MSN 323B 详细说明 |
RENOLIN MR
Multipurpose Lubricating Oil for Bearings, Gearboxes ａnd Hydraulic Systems
Multipurpose Lubricating Oil for Bearings, Gearboxes ａnd Hydraulic SystemsEngine oils have to perform many different functions. They not only have to lubricate, i.e. reduce friction ａnd wear but also to keep the machines clean, inhibit corrosion, seal ａnd cool. In many cases only one of these functions is emphasized while the others are neglected. But one must actually consider all of these functions along with their interactions. The places were most wear ａnd soiling takes place in an engine are the cylinder walls, pistons, rings, valves, distributor ａnd oil pump drives, camshafts, tappets, rockers, all bearings ａnd the sump. An oil must withstand a number of physical conditions, the most important of which being temperature. An oil is expected to perform satisfactorily from - 40 to + 300°C ａnd in some conditions even above this temperature without losing its efficiency. The oil in an engine is mechanically contaminated by combustion residues (soot), abraded metal particles, dust ａnd sand ａnd chemically affected by oxygen, acids ａnd water. The question is: Are these tasks ａnd requirements only applicable to engine oils? ａnd the answer is: No, all machinery lubricants have to fulfil similar requirements. Of course, the particular emphasis reflects the application in question.
The special RENOLIN MR oils are lubricants which satisfy the diversity of such applications.
RENOLIN MR oils were developed over 30 years ago but are still among the leading hydraulic ａnd lubricating oils currently available. This is proof of the quality of these oils as well as confirmation of the foresight of FUCHS R + D laboratories which first developed these detergent hydraulic oils.
The RENOLIN MR series of oils offer the following advantages:
- Multipurpose lubricating oils
- Excellent corrosion protection (characteristics of conservation oils are given)
- Excellent cleaning ａnd sludge transportation properties
- Friction ａnd wear reducing
- Good resistance to ageing
RENOLIN MR multipurpose lubricating oils are recommended for the running-in of machinery, for functional tests ａnd for operational lubrication. When factory-filled, RENOLIN MR oils guarantee running-in free of undue wear ａnd seizures in addition to complete protection of machinery internals against corrosion even in difficult conditions such as overseas shipment. A further advantage is that the factory-filled oil can remain in the machine all the way through to the first routine oil change interval.
If the machinery cannot be delivered factory-filled, the RENOLIN MR oil film remaining after the functional test offers good corrosion protection to all wetted surfaces. When used for normal operation, RENOLIN MR oils reduce wear, avoid stick-slip or frictional vibration ａnd protect against corrosion. Furthermore, they ensure that oil circuits remain clean.
RENOLIN MR oils are therefore recommended for machinery with low speed movements, if a good wetting film between cylinders ａnd sealing elements is required as well as when machinery is exposed to unfavourable atmospheric conditions such as large temperature fluctuations ａnd thus condensation formation, air-borne dust such as in foundries, in cement manufacturing plants or on construction sites ａnd last but by no means least, for machine tools especially if water-miscible cutting fluids are used.
RENOLIN MR 0, MR 1 ａnd MR 3 are heavy-duty spindle oils recommended for machine tools ａnd textile machinery. RENOLIN MR 0 especially for grinding machine spindles rotating faster than 2,000 rpm. RENOLIN MR 1 for machine tool spindles turning between 600 ａnd 2,000 rpm ａnd for textile machine spindles revolving faster than 10,000 rpm. RENOLIN MR 3 for machine tool spindles turning under 600 rpm ａnd for textile machine spindles revolving slower than 10,000 rpm.
RENOLIN MR 5, RENOLIN MR 10, RENOLIN MR 15, are heavy-duty hydraulic oils capable of withstanding continuous temperatures of over 100°C, even up to 120°C for short periods. They are recommended by leading manufacturers of hydraulic equipment ａnd in some cases, factory-filled.
RENOLIN MR 10 is also suitable for power steering systems. RENOLIN MR 10, RENOLIN MR 15 ａnd RENOLIN MR 20 are recommended for medium-duty transmissions, in particular those fitted with electromagnetic, multiple clutches. RENOLIN MR 30 ａnd RENOLIN MR 40 are recommended for heavy-duty transmissions.
