型号: CX 4/375 AU 品牌: 克鲁勃

克鲁勃KLUBER CENTOPLEX CX4/375 AU高速齿轮润滑脂
说明：KLUBER CENTOPLEX CX4 375 AU是一个基于特殊润滑脂矿物油和锂皂基。这是一个非常柔软的油脂类一致性应用，作为一个非常低的油脂，KLUBER CENTOPLEX CX4 375 AU是受小齿轮适合高的速度，尤其是锥齿轮在右侧的角磨机 。在温度 80°C长期润滑可能。
应用： KLUBER CENTOPLEX CX4 375 AU可到齿面应用刷为了让数量润滑。润滑也可以通过提供一个油脂、油底壳中的齿轮。由于向好油分离，润湿润滑齿轮或轴承的变点保证，KLUBER CENTOPLEX CX4 375 AU也可以适用于通过中央自动润滑系统。

CENTOPLEX CX 4/375 AU
High-speed grease for gears
The data in this product information is based on our general experience ａnd knowledge at the time of printing ａnd is intended to give information of possible applications to a reader
with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected
product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required ａnd possible we will be pleased to provide a sample for testing.
Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time without notice.
Klüber Lubrication, a member of the Freudenberg group
Publisher ａnd Copyright: Reprints, total or in part, are permitted if source Klüber Lubrication München KG
Klüber Lubrication München KG is indicated ａnd voucher copy is forwarded. Geisenhausenerstraße 7, 81379 München, Deutschland
+49 89 7876-0, Telefax +49 89 7876-333, www.klueber.com
Product information 5.638 e Edition 01.08 replace edition 12.03
Article number: 020047 GATE-B/TB
CENTOPLEX CX 4/375 AU
• High-speed grease for gears
• Shear stable
• Good oil separation at low
temperatures
Product data
Base oil mineral oil
Thickener lithium soap
Service temperature range*, [°C]
lower limit value, approx.
upper limit value
-30
120
Color brown
Aspect almost transparent
Texture homogeneous
Cone penetration, DIN ISO 2137,
worked penetration, 25 °C
lower limit value, [0.1 mm]
upper limit value, [0.1 mm]
355
385
Corrosion protection, DIN 51802
(SKF-EMCOR), testing time 1 week, distilled
water, corrosion degree ≤ 1
Oil separation, DIN 51817, 7d/40 °C, [% by wt.] ≤ 7
Flow pressure, DIN 51805, -30 °C, [mbar] ≤ 1400
Drop point, DIN ISO 2176, [°C] ≥ 150