如今人们对高性能的机械设备的需求与日俱增，对机器日益增长的功能及工作效率的要求，导致机器的速度更快，受力更广，应用范围更广，也导致了对润滑油的要求不断增加。
福斯的工业用油顺应了当代工业发展的潮流。这些油品具有的优良品质，远远超过机械厂家的规格与指标。换油周期的延长及维修费用的降低，都能助您降低成本。
福斯工业用油有相当广的应用范围和极高的使用寿命，该特点提供了*优的润滑性及的损耗，甚至在高负荷情况下亦是如此。
液压油 | 产品名称 | ISO粘度
等级 | 粘度
指数 | 开口闪点
℃ | 倾点
℃ | 主要应用 | RENOLIN B 10
RENOLIN B 15
RENOLIN B 20 | 32
46
68 | 100
100
100 | 190
210
220 | -27
-27
-24 | 通用型抗磨液压油，用于对油品氧化、老化、抗磨及抗乳化性能有要求的场合，满足并超过DIN HLP及ISO HM 等级。 | RENOLIN B 32 HVI
RENOLIN B 46 HVI | 32
46 | 170
170 | 175
180 | -36
-33 | 低凝抗磨液压油，用于所有液压系统，特别是要求高粘度指数的场合。如寒冷地区或低温环境机器设备的液压系统，露天作业的机器设备及工作温度极大的液压装置。满足并超过DIN HVLP及ISO HV 等级。 | RENOLIN MR 0
RENOLIN MR 1
RENOLIN MR 3
RENOLIN MR 5
RENOLIN MR 10
RENOLIN MR 15
RENOLIN MR 20
RENOLIN MR 30 | 2
5
10
22
32
46
68
100 | －－
－－
105
100
100
100
100
95 | 75
85
160
165
200
220
225
230 | -42
-33
-30
-30
-30
-30
-27
-21 | 多用途润滑油，具有良好的抗氧化性及粘温性能，同时还有突出的防锈、清洁、抗磨性能。Renolin MR 0,MR 1,MR 3 是机床及纺织机器主轴/锭子用油。Renolin MR 5/10/20 属于极压性液压油，可在100℃的高温下持续使用，并提供优异的防锈保护。Renolin MR 30 用于较大的齿轮箱中，亦可作为初装及防锈油。
Renolin MR 系列产品满足并超过DIN HLPD/CLP及ISO HMD/CKC等级。 | | HYDROTHERM 46 NP 3 | 46 | 170 | －－ | 45 | 乙二醇基的抗燃液压油，用于接近高温、火焰及有防火要求的液压循环系统，主要用于冶炼、矿山、注塑成型等行业的液压设备。满足并超过DIN/ISO HFC 等级。 | | |
| | 导轨油 | 产品名称 | ISO粘度
等级 | 粘度
指数 | 开口闪点
℃ | 倾点
℃ | 主要应用 | RENEP 68K
RENEP 68K | 68
220 | 100
95 | 215
230 | -21
-16 | 精密机床水平和立式导轨润滑油，能有效防止导轨的爬行。根据粘度的要求，又可兼作液压油、齿轮油。满足并超过DIN CGLP 等级。 | | |
| | 导热油 | 产品名称 | ISO粘度
等级 | 粘度
指数 | 开口闪点
℃ | 倾点
℃ | 主要应用 | RENOLIN THERM 250 C
RENOLIN THERM 320 C | 14
32 | 100
100 | 175
205 | -9
-9 | 矿物油型导热油，主要用于密闭式循环加热系统，包括油浴炉、油热交换器、油热套管及油浴恒温器等。使用温度分别可达270℃及320℃。 | | |
| | 齿轮油 | 产品名称 | ISO粘度
等级 | 粘度
指数 | 开口闪点
℃ | 倾点
℃ | 主要应用 | RENOLIN CLP 150
RENOLIN CLP 220
RENOLIN CLP 320 | 150
220
320 | 96
96
96 | 215
220
225 | -24
-21
-15 | 通用型极压工业齿轮油，主要用于承受高压的轴承、连接头及齿轮传动系统、包括涡轮杆传动的润滑，并可使机器传动系统工作稳定、噪音小。满足并超过DIN CLP及ISO CKC 等级。 | RENOLIN CLP 150 PLUS
RENOLIN CLP 220 PLUS
RENOLIN CLP 320 PLUS | 150
220
320 | 96
96
96 | 260
260
265 | -21
-21
-21 | 极压型工业齿轮油，其优良的减磨性能使该系列润滑油特别适用于对抗磨、热负荷及使用寿命有特别要求的场合，可使机器传动系统工作平稳、噪音小。满足并超过DIN CLP及ISO CKC 等级，并取得FLENDER认可。 | RENOLIN UNISYN CLP 150
RENOLIN UNISYN CLP 220
RENOLIN UNISYN CLP 320 | 150
220
320 | 147
148
148 | 230
232
234 | -45
-42
-39 | 全合成聚α烯烃基极压齿轮油，与矿物油完全相溶。用于承受高压和严重温度波动的轴承及齿轮箱润滑系统中。满足并超过DIN CLP HC及ISO CKC 等级，并取得FLENDER认可。 | | |
| | 压缩机油 | 产品名称 | ISO粘度
等级 | 粘度
指数 | 开口闪点
℃ | 倾点
℃ | 主要应用 | | RENOLIN HD 68 | 68 | 105 | 205 | -25 | 往复式空气压缩机油，使用温度为180℃，满足并超过DIN 51506 VCL 压缩机油规格。 | RENOLIN SC 32
RENOLIN SC 46 | 32
46 | 100
100 | 218
225 | -21
-15 | 螺杆式空气压缩机油。当压缩机工作温度低于85℃时，建议使用RENOLIN SC 46。 | | |
| | 冷冻机油 | 产品名称 | ISO粘度
等级 | 粘度
指数 | 开口闪点
℃ | 倾点
℃ | 主要应用 | RENOLIN PAG 46
RENOLIN PAG 46 | 55
120 | 171
190 | 220
240 | -45
-45 | 用于新型无氯制冷剂R 134a 的聚二醇基全合成冷冻机油。具有极佳的热稳定性及减磨特性，与R 134a 相溶性良好，主要用于车辆空调压缩机系统。 | RENOLIN TRITON SEZ 32
RENOLIN TRITON SEZ 68
RENOLIN TRITON SEZ 100 | 33.5
64.4
90.8 | 130
127
108 | 240
258
288 | -48
-45
-39 | 用于新型无氯制冷剂的合成酯基冷动机油，主要用于工业、车辆及家用空调压缩机系统。 | |
Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings ａnd the gears themselves, i.e. to reduce friction ａnd avoid wear but also to provide protection against corrosion, to cool ａnd to seal. The RENOLIN CKC gear oils contain carefully selected base oils ａnd matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.
The special characteristics of RENOLIN CKC series lubricants are:
- High pressure absorption ａnd excellent wear protection
- Good viscosity-temperature behaviour ａnd excellent low-temperature characteristics
- Good corrosion protection for steel ａnd nonferrous metals
- Good resistance to ageing
- Good compatibility with sealing materials
- Low foaming
- Avoidance of frictional vibration by the use of surface-active additives
- Good demulsification characteristics
- Multipurpose applications
Application:RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur ａnd worm drive gears are reliably, effectively ａnd economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet ａnd smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.
| RENOLIN CKC | | 100 | 150 | 220 | 320 | 460 | 680 | |
| Lubricating oil type | | | | | | | | |
| acc. to ISO 6743-6 | | CKC 100 | CKC 150 | CKC 220 | CKC 320 | CKC 460 | CKC 680 | |
| acc. to DIN 51 502 | | CLP 100 | CLP 150 | CLP 220 | CLP 320 | CLP 460 | CLP 680 | |
| Characteristics | Unit | | | | | | | Test method |
| Colour | | 2 | 3 | 4 | 4.5 | 5 | 5 | ASTM D 1500 |
| Kinematic viscosity | | | | | | | | |
| at 40 °C | mm²/s | 94.4 | 145.6 | 214 | 331 | 468 | 690 | ASTM D 445 |
| at 100 °C | mm²/s | 11.1 | 14.5 | 18.5 | 24.6 | 30.8 | 36.8 | ASTM D 445 |
| Viscosity index | | 102 | 98 | 96 | 96 | 95 | 87 | ASTM D 2270 |
| Density at 15 °C | kg/l | 0.884 | 0.89 | 0.895 | 0.9 | 0.903 | 0.922 | ASTM D 1298 |
| Flash point, Cleveland open cup | °C | 220 | 225 | 230 | 230 | 240 | 245 | ASTM D 92 |
| Pour point | °C | – 27 | - 24 | - 21 | - 15 | – 12 | – 12 | ASTM D 97 |
| Neutralization number | mg KOH/g | 0.33 | 0.33 | 0.33 | 0.33 | 0.33 | 0.33 | ASTM D 974 |
| Saponification number | mg KOH/g | 1.3 | 0.84 | 0.84 | 0.84 | 0.84 | 0.84 | ASTM D 94 |
| Sulphate ash | % mass | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | ASTM D 874 |
| Water content | % mass | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | ASTM D 95 |
| Insolubles | % mass | not traceable | not traceable | not traceable | not traceable | not traceable | not traceable | DIN 51 592 |
| Demulsification | min | < 20 | < 20 | < 20 | < 20 | < 20 | < 20 | DIN 51 599 |
| Foaming, | | | | | | | | |
| seq. I | ml | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | ASTM D 892 seq. I-III |
| seq. II | ml | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | ASTM D 892 seq. I-III |
| seq. III | ml | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | < 10/0 | ASTM D 892 seq. I-III |
| Copper corrosion | degree of corr. | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | 1a-100A3 | ASTM D 130 |
| Rust prevention | | pass B | pass B | pass B | pass B | pass B | pass B | ASTM D 665 |
| Ageing behavior, | | | | | | | | |
| viscosity increase | % | 1 | 1 | 1 | 1 | 1 | 1 | ASTM D 2893 |
| precipitation number increase | ml | < 0.05 | < 0.05 | < 0.05 | < 0.05 | < 0.05 | < 0.05 | ASTM D 2893 |
| FZG mechanical gear rig test | load stage | 12 | 12 | 12 | 12 | 12 | 12 | DIN 51 354-2 |
| Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, | | | | | | | | |
| relative volume change | % | 7 | 7 | 7 | 7 | 7 | 7 | DIN 53 521 together with DIN 53 505 |
| change in Shore A hardness | Shore | - 3 | - 3 | - 3 | - 3 | - 3 | - 3 | DIN 53 521 together with DIN |
