【深圳市华航润滑科技有限公司】

名称：Castrol Aircol SR 100

品牌：嘉实多/Castrol

型号：Castrol Aircol SR 100

等：32.46.68.100

包装：20L/200L

产地：欧盟

Description：
The Castrol Aircol™ SR compressor oil range of premium lubricants are designed for use in rotary screw compressors ａnd are based on polyalphaolefin (PAO) fluids.

产品介绍：　嘉实多Aircol™SR压缩机油的优质润滑剂是设计用于螺杆式压缩机和基于合成烃(PAO)液体。

Application：
Aircol SR is suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments ａnd severe operating conditions where very high air discharge temperatures (> 100°C) are experienced. These oils are also suitable for use in compressor units operating at normal operating conditions, with the maximum air discharge temperature =/< 100°C, as defined by ISO 6743-3:2003. For normal operating conditions, these products can be used for extended drain intervals up to 8000 hours. Aircol SR range is fully compatible with nitrile, silicone, polyurethane ａnd fluropolymer seal materials typically used in compressor units. It is not compatible with butadiene styrene (SBR) or ethylene propylene (EPDM) seals. Aircol SR is classified as follows: DIN 51506 classification - VDL ISO 6743/3 - DAG, DAH ａnd DAJ for rotary air compressors Aircol SR grades meet the requirements of: Atlas Copco 8000 hour oil drain interval Kaeser

产品应用：　Aircol SR适用于石油淹没旋转螺杆压缩机操作在端的气候条件下,严厉　环境和严重的操作条件,排气温度很高(> 100°C)有经验。这些油也适用于压缩机单元操作在正常操作条件下,大的空气排气温度= / < 100°C,由ISO 6743 - 3:2003定义的。在正常操作条件下,这些产品可以用于扩展排水间隔8000小时。

Aircol SR范围是完全兼容腈、有机硅、聚氨酯和fluropolymer通常用于密封材料压缩机单位。不兼容丁二烯苯乙烯(SBR)或乙烯丙烯(三元乙丙)密封。

Advantages
Increased oil service life of typically up to 8000 hours in most systems, depending on the operating environment
. Very low deposit forming tendency, extends service life of filters ａnd separators
. Outstanding oxidation stability ａnd antiwear performance providing long lubricant ａnd equipment life
. Ester-free formulation eliminates the formation of corrosive acids leading to longer equipment life
. Excellent water separation characteristics allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element
. PAO based lubricant means good compatibility with seals ａnd mineral oil based lubricants, allowing changeover to Aircol SR without compatibility issues.

产品优势：

Name	Method	Units	Aircol SR 100
Density at 15°C	ISO 12185, ASTM D4052	g/ml	0.84
Kinematic Viscosity at 40°C	ISO 3104, ASTM D445	mm²/s	100
Kinematic Viscosity at 100°C	ISO 3104, ASTM D445	mm²/s	14
Viscosity Index	ISO 2909, ASTM D2270	-	142
Foam Sequence l	ISO 6247, ASTM D892	mls/mls	10/0
Pour Point	ISO 3016, ASTM D97	°C	-48
Flash Point, COC	ISO 2592, ASTM D92	°C	280
RPVOT	ASTM D2272	Mins	3,000
FZG Fail Stage (A8.3/90)	ISO 14635-1, DIN 51354	-	9