产品展示
克鲁勃Kluberalfa MR 3 -800 US
点击次数：194发布时间：2018/7/18 17:26:45
更新日期：2024/3/23 17:18:45
所 在 地：中国大陆
产品型号：
优质供应
详细内容
Klüberalfa®
MR 3 US Series
Universal sliding fluids for seals, guides ａnd plastic friction points
Product designation, art. number: 320374, 320558, 320436, en Edition 03.12
KLUSA/ck
Benefits for your application
— Eliminates noise due to plastic & elastomer friction, i.e., “itching”
— Optimizes the sliding part behavior
— Can be used with different material combinations
— Available in a reliable spray dispenser / applicator
Description
Klüberalfa lubricants, based on per-fluorinated
polyether oils, (PFPE) have been developed for
specific applications where optimum
performance under lifetime lubrication conditions
is required.
Klüberalfa MR 3 products are thermally stable
fluids with very low evaporation characteristics
for lubrication of component parts subject to
sliding friction conditions. Compatibility with
constructional materials is excellent.
Klüberalfa MR 3 products contain a nonflammable
solvent enabling application of a thin
homogeneous lubricant film to all contact
surfaces. The product can be used across the
wide temperature range normally required in
automotive applications.
Application
Klüberalfa MR 3 was specifically developed for
friction points in motor vehicles where improved
sliding ａnd noise damping behavior are required.
Klüberalfa MR 3 is compatible with the majority
of constructional materials used in car body
interiors including rubber, leather, fabric and
plastics.
Klüberalfa MR 3 is also compatible with most
thermoplastics ａnd duro-plastics such as those
found in dashboard, seat ａnd sunroof guide
rails, arm rests, seat adjustment mechanisms,
door ａnd sunroof seals.
Perfluorinated polyether oils are generally
regarded as neutral towards elastomers and
plastics (possible exception: perfluorinated rubber).
Nevertheless compatibility with the
materials should be tested, especially prior to
series application.
Application notes
Klüberalfa MR 3 Fluids can be applied by
means of immersion or spraying. The
component should then be left to dry at ambient
temperature for no more than five minutes.
Prior to application, clean the application
surfaces ａnd make sure they are bright
(i.e. free of oils, greases, perspiration ａnd dirt
particles) for optimum results. To prevent
evaporation losses, the container or immersion
vessel should be tightly closed after use. The
concentration of Klüberalfa MR 3 fluids can be
adjusted to individual requirements by addition
of the solvent component, Klüberalfa XZ 3-1.
Minimum shelf life
The minimum shelf life is approx. 24 months if
the product is stored in its original unopened
container in a dry, frost-free.
Pack sizes
100 ml pump-spray dispenser
500 ml canister
1, 20 ａnd 200 liter container
Additional pack sizes are available on request.
Material Safety Data Sheets
Material safety data sheets can be requested
via email at info@us.kluber.com. You may also
obtain them through your contact person at
Klüber Lubrication.
Product information
Klüberalfa®
MR 3 US Series
Universal sliding fluids for seals, guides ａnd plastic friction points
your global specialist
With more than 2000 products available around the world, you can be sure that Klüber
has the right product for your application. Please contact Klüber Lubrication specialists
worldwide to assist you in all matters regarding lubrication.
www.klueber.com
Klüber Lubrication North America L.P., 32 Industrial Dr., Londonderry, NH 03053, phone 603-647-4101, fax 603-647-4106.
The data in this product information is based on our general experience ａnd knowledge at the time of printing ａnd is intended to give information of possible
applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of
performing preliminary tests with the selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and
possible we will be pleased to provide a sample for testing. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all
the technical data in this product information at any time without notice.
Klüber Lubrication, a company of the Freudenberg Group
Publisher ａnd Copyright: Klüber Lubrication München KG. Reprints, total or in part, are permitted if source is indicated ａnd voucher copy is forwarded.
Product data* Klüberalfa MR 3 US Klüberalfa MR 3 500 US Klüberalfa MR 3 800 US
Article number 320374 320558 320436
Composition PFPE, solvent PFPE, solvent PFPE, solvent
Service temperature range**, [°C] up to 180 up to 200 up to 250
Appearance Transparent Transparent Transparent
Base oil viscosity, DIN 51562 pt. 01,
at 40 °C [mm 2
/s], approx. 100 400 800
Flash Point DIN EN ISO 2592, °C None None None
Density at 20 °C [g/cm 3
], approx.*** 1.53 1.55 1.70
