产品展示
优质供应
详细内容
深圳市和华利贸易有限公司 手机：13620934101,手机：屏蔽谭丽
1. Identification of the product ａnd the company
Trade name : GulfSea Synth Gear Oil PG 220 (ISO VG 220)
Use : Industrial gear oil
Company identification : Gulf Oil Marine Ltd. 13th Floor, Fortis Tower, No. 77-79 Gloucester Road,
Wan Chai, Hong Kong
Tel : (852) 3693 0568 Fax : (852) 3748 9960 www.gulf-marine.com
Emergency phone nr : Tel : (852) 3693 0568
Company : As above.
2. Information on ingredients
Composition (preparation) : Mixture of synthetic base oils ａnd additives.
Substance name Value (s) CAS nr EINECS nr EC index CERTIFCATE
Polyglycol base oil : >97 Mixture －－－－- －－－－- －－－－-
C11 – C14, Branched Alkyl amines : <1 80939-62-4 －－－－- －－－－- Xi; R36/38,
N; R51/53
Refer to section 16 for full text of the above classification statements.
3. Hazards identification
4. First aid measures
First aid
- Inhalation : Assure fresh air breathing. Obtain medical attention if breathing difficulty
persists.
- Skin contact : Remove affected clothing ａnd wash all exposed skin area with mild
soap ａnd water, followed by warm water rinse. Seek medical attention if
irritation develops.
- Eye contact : Rinse immediately with plenty of water. Seek medical attention
if irritation develops.
- Ingestion : DO NOT INDUCE VOMITING. Seek medical attention immediately.
General information :
If there is any suspicion of aspiration into the lungs either directly or
as a result of vomiting, obtain medical advice.
Main hazards : This product is not classified according to European guidelines 67/548/EC
and 1999/45/EC ａnd their updates.
This product is not classified according to EU Regulation 1278/2008 ａnd its
updates.
Adverse human health effects : May produce an allergic reaction.
Environmental hazards : No specific risk for the environment.
Product name: GulfSea Synth Gear Oil
PG 220
Page: 2/6
Revision Date: 14/02/2017 Revision nr: 4
Product No.: 2SE5000 Supersedes: 25/07/14
MATERIAL SAFETY DATA SHEET
5. Fire - fighting measures
Extinguishing media
Suitable extinguishers : Use an extinguishing agent suitable for the surrounding fire.
Extinguishers not to be used : Not known.
Special exposure hazards : In a fire or if heated a pressure will occur ａnd the container may burst or
melt.
Promptly isolate the scene by removing all persons from the vicinity of the
incident if there is a fire. No action shall be taken involving personal risk or
without suitable training.
Products of combustion : Carbon oxides (CO, CO2), nitrogen oxides (NOx), smoke ａnd irritating
vapours as product of incomplete combustion.
Protection against fire :
Do not enter fire area without proper protective equipment, including
respiratory protection.
Remarks : Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat
source
or source of ignition
6. Accidental release measures
Personal precautions :
Keep public away from danger area. Wear recommended personal
protective equipment. Equip cleanup crew with proper protection.
Environmental precautions : Prevent entry to sewers ａnd public waters. Notify authorities if liquid
enters sewers or public waters.
Cleaning up methods
Small Spills :
Stop leakage without risk. Move containers from spill area. Clean up any
spills as soon as possible using an absorbent material to collect it.
Collect spills ａnd put it into appropriated container. Use suitable disposal
containers. Recover the cleaning water for disposal. Dispose via a
licensed waste disposal contractor according to local legislation. Spill
area may be slippery.
Large Spills :
Stop leakage without risk.Move containers from spill area. Prevent entry
into waterways or confined areas. Collect material with the use of a
suction pump or other equipment. Wash effluent treatment plant or
process as follows. Contain ａnd collect spillage with non combustible,
absorbent material e.g. sand, earth, diatomaceous earth ａnd place in a
container for disposal in accordance with local regulations. Dispose via a
licensed waste disposal contractor.
on soil : May require excavation of contaminated soil.
7. Handling ａnd storage
General :
No naked lights. No smoking. Keep away from sources of ignition.
Precautions in handling and
storage
:
Handle in accordance with good industrial hygiene ａnd safety
procedures.
Storage : Keep container closed when not in use. Keep only in the original
container in a cool, well ventilated place. Keep at temperature not
exceeding 45°C.
Handling : Wash hands ａnd other exposed areas with mild soap ａnd water
before eat, drink or smoke ａnd when leaving work.
Packaging material : Recommend to use original container.
Product name: GulfSea Synth Gear Oil
PG 220
Page: 3/6
Revision Date: 14/02/2017 Revision nr: 4
Product No.: 2SE5000 Supersedes: 25/07/14
MATERIAL SAFETY DATA SHEET
8. Exposure controls / personal protection
Exposure Limit Values
Ingredient Name Occupational Exposure Limits
Polyglycol base oil ACGIH TVL (United States). Notes : (Oil Mist)
TWA : 5mg/m3
8 hour(s)
STEL : 10mg/m3
15 minute(s)
Recommended monitoring
procedure
: If the product contains ingredients with exposure limits, personal,
workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control measures
and/or the necessity to use respiratory protective equipment. Reference
should be made to European Standard EN 689 for methods for the
assessment of exposure by inhalation to chemical agents ａnd national
guidelines for methods for the determination of hazardous substances.
Exposure Controls
Occupational Exposure Controls
:
Under normal operating conditions no exposure controls are expected
to be required. No special ventilation requirements. Good ventilation
should be sufficient to control worker exposure to airborne
contaminants. If this product contains ingredients with exposure limits,
use process enclosures, local exhaust systems or other engineering
controls to keep worker exposure below recommended or statutory
requirements.
Hygiene Measures : Wash hands, forearms ａnd face thoroughly after handling chemical
products, before eating, smoking, ａnd using the lavatory ａnd at the end
of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated clothes
before reusing. Ensure that the eyewash stations ａnd showers are
close to the workstation locations.
Respiratory protection : No special respiratory protection equipment is recommended under
normal conditions of use with adequate ventilation. Use a proper fitted
air purifying or air-fed respirator complying with an approved standard
if a risk assessment indicates it is necessary. Respirator selection
must be based on known or expected exposure levels, the hazard of
the product ａnd the safe working limits of the selected respirator.
Recommend: Organic vapour filter
Hand protection : Chemical resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical products if
a risk assessment indicates that it is necessary. Recommend: Use
neoprene, nitrile, PVA or Viton gloves.
Skin protection : No special clothing/skin protection equipment is recommended under
normal conditions of use. Personal protective equipment for the body
should be selected based on the task being performed ａnd the risks
involved ａnd should be approved by a specialist before handling the
products.
Eye protection : Safety eyewear complying with an approved standard should be used
when a risk assessment indicates that this is necessary to avoid
exposure to liquid splashes, mists ａnd dusts.
Environmental Exposure Controls : Emissions from ventilations or work process equipment should be
checked to ensure that they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Product name: GulfSea Synth Gear Oil
PG 220
Page: 4/6
Revision Date: 14/02/2017 Revision nr: 4
Product No.: 2SE5000 Supersedes: 25/07/14
MATERIAL SAFETY DATA SHEET
9. Physical ａnd chemical properties
Physical state : Liquid, Clear
Colour : Transparent
Odour : Mild Hydrocarbon Odour
Flash point [°C] (ASTM D 92) : Open Cup > 260°C (Cleveland)
Auto Ignition Temperature : Fire Point > 310°C
Specific gravity
: 0.998 – 1.094kg/L @ 20°C
10. Stability ａnd reactivity
Physico-chemical stability : Stable.
Conditions to avoid : Reacts with strong oxidizing agents ａnd acids.
Materials to avoid : Avoid contact with oxidizing agents, reducing agents ａnd acids.
Hazardous decomposition
products
: May release COx, NOx, smoke ａnd irritating vapours when heated to
decomposition.
11. Toxicological information
Potential Acute Health Effects
- Inhalation : No known significant effects or critical hazards.
- Ingestion : No known significant effects or critical hazards.
- Skin contact : No known significant effects or critical hazards.
- Eye contact : No known significant effects or critical hazards.
Potential Acute Health Effects
Mixture /
Ingredient Name
Results Species Dose Exposure
Polyglycol base oil LD50 Oral Rat > 5000mg/kg -
Conclusion / Summary
Potential Chronic Health Effects : Not available
Chronic Toxicity : Not available
Irritation / Corrosion : Not irritant
Sensitiser : Non sensitizing
Carcinogenicity : Not available
Mutagenicity : Not available
Teratogenicity : Not available
Reproductive Toxicity : Not available
Potential Effects : No known significant effects or critical hazards
Carcinogenicity : Not listed as carcinogenic by OSHA, NTP or IARC
Mutagenicity : No known significant effects or critical hazards
Teratogenicity : No known significant effects or critical hazards
Development effects : No known significant effects or critical hazards
Fertility effects
: No known significant effects or critical hazards
Product name: GulfSea Synth Gear Oil
PG 220
Page: 5/6
Revision Date: 14/02/2017 Revision nr: 4
Product No.: 2SE5000 Supersedes: 25/07/14
MATERIAL SAFETY DATA SHEET
Over-exposure signs/symptoms
Inhalation : No specific data
Ingestion : No specific data
Skin : No specific data
Eyes : No specific data
12. Ecological information
Environmental Effects : Not known significant effects or critical hazards
Conclusion / Summary
Aquatic Toxicity : Toxicity on fish LC50 > 100mg/l
Biodegradability : Not available
Other adverse effects : No known significant effects or critical hazards
13. Disposal considerations
Methods of Disposal :
The generation of waste should be avoided or minimized wherever
possible. Empty containers or liners may retain some product
reuses. This material ａnd its containers must be disposed off in a
safe way. Dispose of surplus ａnd non-recyclable products via a
licensed waste disposal contractor. Disposal of this product,
solutions ａnd any by-products should at all times comply with the
requirements of environmental protection ａnd waste disposal
legislation ａnd any regional local authority requirements. Avoid
dispersal of split material ａnd runoff ａnd contact with soil,
waterways, drains ａnd sewers.
Hazardous Waste : With the present knowledge of the supplier, this product is not
regarded as hazardous waste, as defined by EU Directive
91/689/EEC
14. Transport information
Regulatory
Information UN Number Proper Shipping
Name Classes PG*
Label Additional
Information
ADR/RID Class Not Available Not Available Not
Available - -
AND/ADNR Class Not Available Not Available Not
Available - -
IM DG Class Not Available - - -
IATA Class Not Available - - -
*Packaging Group
Product name: GulfSea Synth Gear Oil
PG 220
Page: 6/6
Revision Date: 14/02/2017 Revision nr: 4
Product No.: 2SE5000 Supersedes: 25/07/14
MATERIAL SAFETY DATA SHEET
15. Regulatory information
EU Regulations
Classification ａnd labeling have been determined according to EU Directives 67/548/EEC ａnd 1999/45/EC
(including amendments) ａnd take into account the intended product use.
Risk Phrases : The product is not classified according to EU Legislation.
Other EU Regulations
Additional warning Phrases : Safety Data Sheet available for professional users on request.
International Regulations
Canada Inventory : All components are listed or excepted.
US Inventory (TSCA 8b) : All components are listed or excepted.
Europe Inventory : All components are listed or excepted.
16. Other information
R-Phrases full text : R36/38 – Irritating to eyes ａnd skin.
As referred in sections 2 & 3 –
Europe
:
R51/53 – Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Classification full text : Xi – Hazardous.
As referred in sections 2 & 3 –
Europe
: N – Hazardous to the aquatic environment.
Product information :
For specific or detailed technical data for this product, please contact
your local sales representative.
DISCLAIMER OF LIABILITY
The information in this MSDS was obtained from sources which we believe are reliable. However, the information is
provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling,
storage, use or disposal of the product are beyond our control ａnd may be beyond our knowledge. For this ａnd other
reasons, we do not assume responsibility ａnd expressly disclaim liability for loss, damage or expense arising out of
or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared ａnd is
to be used only for this product. If the product is used as a component in another product, this MSDS information
may not be applicable.
End of document
