产品展示
海湾润滑脂GulfSea HYPERBAR CS2
点击次数：597发布时间：2018/8/10 15:47:18
更新日期：2024/3/23 17:18:45
所 在 地：中国大陆
产品型号：
优质供应
详细内容
深圳市和华利贸易有限公司 手机：13620934101,手机：屏蔽谭丽
PRODUCT DATA SHEET
GulfSea HYPERBAR CS2
Calcium Sulfonate Complex EP Grease for Heavy Duty Applications
Product Description
GulfSea HYPERBAR CS2 grease is heavy duty multipurpose calcium sulfonate complex soap based grease for
use in a wide range of marine, industrial ａnd automotive applications. It is manufactured from high quality solvent
refined base oils ａnd performance additives to provide good structural stability, resistance to water washout and
effective protection from wear ａnd corrosion. It is specially designed to deliver outstanding performance in severe
application areas like marine, mines, offshore ａnd heavy duty off-highway equipment.
Features & Benefits
Outstanding extreme pressure properties extend bearing life under shock-load conditions.
Excellent mechanical stability ａnd resistance to softening ensures long lubricant life ａnd prevents
leak out of bearings even in the presence of water.
Excellent corrosion protection ａnd resistance to water washout resulting in improved component
protection ａnd equipment life.
Good adhesive property ensures that the grease stays in place for longer relubrication intervals.
Very high ｄrop point ensures extended operating range of up to 180ºC.
Applications
Heavy duty equipments used in marine, off-shore, cement, mining / quarrying, agriculture & forestry/
logging, off highway ａnd other industrial as well as automotive applications under severe conditions.
General lubrication of axles, ball joints, universal joints, couplings, power take-offs kingpins, bushings
and disc brakes.
Due to continual product research ａnd development, the information contain herein is subject to change without notification.
Typical Properties may vary slightly
Page 2 of 2
PRODUCT DATA SHEET
Typical Properties
Meets the following Specifications
ASTM D4950 GC-LB, ISO 6743-9 L-XBFIB2, DIN 51502 KP2R-25
Typical Properties
Test Parameters Test Method Typical
Values
Colour Visual Yellow ochre
Texture Visual Smooth /
Buttery
NLGI 2
Type of base oil Mineral
Estimated operating temperature range -25ºC to
180ºC
Base oil viscosity at 40°C; cSt D 445 180
Consistency, worked penetration 60 strokes D 217 280
Worked penetration after 100,000 strokes; change in
consistency D 217 3
Dropping point; ºC D 2265 305
Oil separation at 25°C for 24 hrs; %wt. D 1742 1
Oxidation resistance, pressure drop; psi D 942 5
Water washout at 79°C; %wt. loss D 1264 2
Four ball weld load; kgs. D 2596 500
Timken load; lbs D 2509 65
SKF - EMCOR steel corrosion; rating D 6138 0-0
Copper strip corrosion at 100°C for 24 hrs; rating D 4048 1a
Rust protection D 1743 Pass
