| 奎克化学 > 液压油 > QUINTOLUBRIC® 855/QUINTOLUBRIC 855 | | QUINTOLUBRIC® 855/QUINTOLUBRIC 855 详细说明 （浏览995次） | QUINTOLUBRIC® 855
FIRE RESISTANT HFD-U HYDRAULIC FLUID
APPLICATION SHEET
BENEFITS
APPLICATIONS
QUINTOLUBRIC® 855 was designed to replace
anti-wear, mineral oil-based hydraulic fluids as
well as vegetable-based fluids ａnd polyol esters.
QUINTOLUBRIC® 855 can be used in or near fire
hazards ａnd in environmentally sensitive hydraulic
applications without compromising the overall
hydraulic system operation.
QUINTOLUBRIC® 855 is based on high-quality,
natural esters ａnd carefully selected additives
to achieve excellent hydraulic fluid performance.
QUINTOLUBRIC® 855 does not contain water,
mineral oil or phosphate ester.
QUINTOLUBRIC® 855 is recommended for use in
systems with a maximum operating temperature
of 70°C (150ºF), in combination with partial
refreshment by system leakage.
QUINTOLUBRIC® 855 is used as received and
pre-filtration is not necessary because the fluid is
filtered during production. Its higher viscosity index
compared with mineral oil makes it ideal for use at a
wider temperature range. QUINTOLUBRIC® 855 also
has good cold start-up properties ａnd offers a higher
viscosity at increased temperatures.
PROPERTIES
PROPERTIES (TEST METHOD) TYPICAL VALUES
Appearance Yellow to Amber Fluid
Kinematic Viscosity (ASTM D445)
At 20O
C
At 40O
C
At 100O
C
118 mm2
/s or cSt
55 mm2
/s or cSt
12 mm2
/s or cSt
Viscosity Index (ASTM D2270) 220
Density at 15O
C (ASTM D1298) 0.92 g/cm3
Acid Number (ASTM D974) 0.95 mg KOH/g
Pour Point (ASTM D97) -21O
C ( -6O
F)
Foam Test at 25o
C (ASTM D892) 0-0 ml-ml
Corrosion Protection
ISO 4404-2
ASTM D665 A / ASTM D130
Pass
Pass / 1a
Dry TOST (ASTM D943 mod.) 200 hrs
Flash Point (ASTM D92) 310O
C / 590O
F
Fire Point (ASTM D92) 355O
C / 675O
F
Auto Ignition Temperature
(DIN 51794)
>400o
C / >752o
F
Air Release (ASTM D3427) 8 min.
Pump Test (ASTM D 2882) <5 mg wear
Gear Lubrication (DIN 51354-2) >12 FZG load stage
Demulsability (ASTM D1401) 41-39-0 (25)
ml-ml-ml (min)Prior to using this product, consult the Material Safety Data Sheet for instructions regarding safe handling ａnd environmental issues. The information contained herein is based on data
available to us ａnd is believed to be accurate. HOWEVER, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY USE, OR ANY OTHER WARRANTY IS EXPRESSED OR TO BE IMPLIED,
REGARDING THE ACCURACY OF THESE DATA. THE RESULTS TO BE OBTAINED FROM THE USE THEREOF, OR THE HAZARDS CONNECTED WITH THE USE OF THE PRODUCT. Quaker Chemical
Corporation assumes no liability for any alleged ineffectiveness of the product or any injury or damage, direct or consequential, resulting from the use of this product unless such injury or
damage is solely attributable to negligence on the part of Quaker Chemical Corporation. 05/2013
quakerchem.com | quintolubric.com | info@quakerchem.com
QUINTOLUBRIC® 855
FIRE RESISTANT HFD-U HYDRAULIC FLUID
APPLICATION SHEET
ELASTOMERS
ISO
1629 DESCRIPTION S* MD* D*
NBR Medium to high nitrile rubber
(Buna N, >30% acrylonitrile)
C C C
FPM Fluoroelastomer (Viton®) C C C
CR Neoprene S S S
IIR Butyl rubber S N N
EPDM Ethylene propylene rubber N N N
PU Polyurethane C C C
PTFE Teflon® C C C
**(S- Static, MD- Mild Dynamic, D- Dynamic)
C = Compatible
S = Satisfactory for short term use, but replacement with a completely
compatible elastomer is recommended at the earliest convenience.
N = Not Compatible
ENGINEERING DATA
PROPERTIES (TEST METHOD) TYPICAL VALUES
Specific Heat at 20O
C
(D2766)
2.06 kJ/kg OC
.49 Btu/lb O
F
Coefficient of Thermal
Expansion at 20O
C (D1903)
6 X 10-4 per O
C
Vapor Pressure (02551)
At 20O
C
At 66O
C
3.2 X 10-6 mmHg
7.5 X10-6 mm Hg
Bulk Modulus at 20O
C
At 210 bar
At 3,000 psi
1.87 X 105
N/cm2
266,900 psi
Thermal Conductivity at 19O
C
(D 2717)
0.167 J/sec/m/O
C
FLUID MAINTENANCE
In order to prolong fluid life, the product should
be kept free from water ａnd dirt. High temperatures
should also be avoided. We recommend a program
of regular fluid analysis (no less than twice per year).
Fluid analysis services are available directly
from Quaker.
SAFETY
Please consult the Safety Data Sheets (SDS) for
information on measures to be taken to ensure the
protection of health ａnd safety at the workplace.
SDS’s are available directly from Quaker.
STORAGE AND HANDLING
If the following criteria are adhered to, the product can
be stored for at least twelve months. Recommended
long term storage temperature range: 0-40o
C. Keep
containers/drums tightly closed when not in use and
store in a dry ａnd well ventilated area. | | |
