产品展示
优质供应
详细内容
Mobil DTE 10 Excel™ Series
Mobil Industrial, United States
View the Mobil DTE 10 Excel SeriesPremium Quality Hydraulic Oils
Mobil Industrial, United States
Premium Quality Hydraulic Oils
Product Description
Mobil DTE 10 Excel™ Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial ａnd mobile equipment hydraulic systems.
The Mobil DTE 10 Excel Series is constructed from selected base oils ａnd a proprietary additive system to provide well balanced performance in a range of applications. The products exhibit outstanding oxidation ａnd thermal stability allowing long oil life ａnd minimized deposit formation in severe hydraulic systems using high pressure, high output pumps. The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo ａnd proportional valves found in many modern hydraulic systems. The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency ａnd component protection at both low ａnd high temperatures. Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage ａnd micro dieseling. The carefully selected base oil ａnd additives allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) ａnd the zinc free anti-wear system provides a high degree of protection in gear, vane ａnd piston pumps while also minimizing deposit formation.
Formulated with extensive laboratory ａnd in-service field testing, the Mobil DTE 10 Excel series can help provide quantifiable increases in hydraulic efficiency compared to other Mobil™ hydraulic oils. This can translate to reduced power consumption or increased machine output, resulting in monetary savings.
In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic applications.
In additional laboratory ａnd in-service field demonstrations conducted on a wide range of modern hydraulic systems, the Mobil DTE 10 Excel series demonstrated, compared to Mobil conventional hydraulic fluids, exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system cleanliness ａnd component protection. Mobil DTE 10 Excel also demonstrated the value of its high viscosity index ａnd outstanding shear stability by operating successfully in temperatures as low as -34°C ａnd by maintaining ISO viscosity grade.
Mobil DTE 10 Excel has also been tested in standard vane pumps under controlled conditions directly against competitive products. At the end of the 30 minute test, Mobil DTE 10 Excel resulted in less system heat generation ａnd the system temperatures were measured to be 6°C-7°C less than certain competitive products run under identical conditions.
The energy efficiency of Mobil DTE 10 Excel relates solely to the fluid performance when compared to conventional Mobil-branded hydraulic fluids. The technology used allows up to 6% increase in hydraulic pump efficiency compared to Mobil DTE 20 series when tested in standard hydraulic applications under controlled conditions. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with all applicable industry standards ａnd protocols.
Mobil DTE 10 Excel™ Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial ａnd mobile equipment hydraulic systems.
The Mobil DTE 10 Excel Series is constructed from selected base oils ａnd a proprietary additive system to provide well balanced performance in a range of applications. The products exhibit outstanding oxidation ａnd thermal stability allowing long oil life ａnd minimized deposit formation in severe hydraulic systems using high pressure, high output pumps. The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo ａnd proportional valves found in many modern hydraulic systems. The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency ａnd component protection at both low ａnd high temperatures. Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage ａnd micro dieseling. The carefully selected base oil ａnd additives allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) ａnd the zinc free anti-wear system provides a high degree of protection in gear, vane ａnd piston pumps while also minimizing deposit formation.
Formulated with extensive laboratory ａnd in-service field testing, the Mobil DTE 10 Excel series can help provide quantifiable increases in hydraulic efficiency compared to other Mobil™ hydraulic oils. This can translate to reduced power consumption or increased machine output, resulting in monetary savings.
In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic applications.
In additional laboratory ａnd in-service field demonstrations conducted on a wide range of modern hydraulic systems, the Mobil DTE 10 Excel series demonstrated, compared to Mobil conventional hydraulic fluids, exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system cleanliness ａnd component protection. Mobil DTE 10 Excel also demonstrated the value of its high viscosity index ａnd outstanding shear stability by operating successfully in temperatures as low as -34°C ａnd by maintaining ISO viscosity grade.
Mobil DTE 10 Excel has also been tested in standard vane pumps under controlled conditions directly against competitive products. At the end of the 30 minute test, Mobil DTE 10 Excel resulted in less system heat generation ａnd the system temperatures were measured to be 6°C-7°C less than certain competitive products run under identical conditions.
The energy efficiency of Mobil DTE 10 Excel relates solely to the fluid performance when compared to conventional Mobil-branded hydraulic fluids. The technology used allows up to 6% increase in hydraulic pump efficiency compared to Mobil DTE 20 series when tested in standard hydraulic applications under controlled conditions. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with all applicable industry standards ａnd protocols.
Features ａnd Benefits
The Mobil DTE 10 Excel Series hydraulic oils provide outstanding hydraulic system efficiency; ultra keep clean performance, ａnd a high degree of fluid durability. The hydraulic efficiency feature can lead to reduced energy consumption for both industrial ａnd mobile equipment, reducing operating costs ａnd improving productivity. Their excellent oxidation ａnd thermal stability can help to extend oil ａnd filter change intervals while helping to ensure clean systems. Their high level of anti-wear properties ａnd excellent film strength characteristics result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.
Features Advantages ａnd Potential Benefits Excellent Hydraulic Efficiency Potentially reduced energy consumption or increased system responsiveness Ultra Keep Clean Performance Reduced system deposits leading to reduced machine maintenance ａnd increased component life Shear Stable, High Viscosity Index Sustained component protection over a wide temperature Oxidation ａnd Thermal Stability Extends fluid life even under harsh operating conditions Good compatibility with elastomers ａnd seals Long seal life ａnd reduced maintenance Anti-wear properties Helps reduce wear ａnd protects pumps ａnd components for extended equipment life Excellent Air Separation Characteristics Helps prevent aeration ａnd cavitation damage in low residence time systems Multi metal compatibility Helps ensure excellent performance ａnd protection with a wide variety of component metallurgy
The Mobil DTE 10 Excel Series hydraulic oils provide outstanding hydraulic system efficiency; ultra keep clean performance, ａnd a high degree of fluid durability. The hydraulic efficiency feature can lead to reduced energy consumption for both industrial ａnd mobile equipment, reducing operating costs ａnd improving productivity. Their excellent oxidation ａnd thermal stability can help to extend oil ａnd filter change intervals while helping to ensure clean systems. Their high level of anti-wear properties ａnd excellent film strength characteristics result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.
| Features | Advantages ａnd Potential Benefits |
| Excellent Hydraulic Efficiency | Potentially reduced energy consumption or increased system responsiveness |
| Ultra Keep Clean Performance | Reduced system deposits leading to reduced machine maintenance ａnd increased component life |
| Shear Stable, High Viscosity Index | Sustained component protection over a wide temperature |
| Oxidation ａnd Thermal Stability | Extends fluid life even under harsh operating conditions |
| Good compatibility with elastomers ａnd seals | Long seal life ａnd reduced maintenance |
| Anti-wear properties | Helps reduce wear ａnd protects pumps ａnd components for extended equipment life |
| Excellent Air Separation Characteristics | Helps prevent aeration ａnd cavitation damage in low residence time systems |
| Multi metal compatibility | Helps ensure excellent performance ａnd protection with a wide variety of component metallurgy |
Applications
- Industrial ａnd mobile equipment hydraulic systems operating at high pressures ａnd temperatures in critical applications
- Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
- Systems where cold start-up ａnd high operating temperatures are typical
- Systems requiring a high degree of load-carrying capability ａnd anti-wear protection
-
Machines employing a wide range of components using various metallurgy
- Industrial ａnd mobile equipment hydraulic systems operating at high pressures ａnd temperatures in critical applications
- Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
- Systems where cold start-up ａnd high operating temperatures are typical
- Systems requiring a high degree of load-carrying capability ａnd anti-wear protection
-
Machines employing a wide range of components using various metallurgy
Specifications ａnd Approvals
Mobil DTE 10 Excel Series meets or exceeds the requirements of: 15 22 32 46 68 100 150 DIN 51524-2: 2006-09 X X X X X X X DIN 51524-3: 2006-09 X X X X X ISO 11158 L-HV X X X X X JCMAS HK VG32W (JCMAS P 041:2004) X JCMAS HK VG46W (JCMAS P 041:2004) X Arburg X Krauss-Maffei Kunststofftechnik X Voith VN108 4.3.3 X X X HOCNF Norway/NEMS X X X X X X X
Mobil DTE 10 Excel Series has the following builder approvals: 15 22 32 46 68 100 150 BoschRexroth Fluid Rating List 90245 X X X Denison HF-0 X X X Eaton Vickers 694 (encompasses former I-286-S, M-2950-S or M-2952-S) X X X Frank Mohn, Framo hydraulic cargo pumping X Fives Cincinnati P-69 X Fives Cincinnati P-70 X ORTLINGHAUS-WERKE GMBH ON 9.2.10 X X X X STROMAG AG TM-000 327 X
| Mobil DTE 10 Excel Series meets or exceeds the requirements of: | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
| DIN 51524-2: 2006-09 | X | X | X | X | X | X | X |
| DIN 51524-3: 2006-09 | X | X | X | X | X | ||
| ISO 11158 L-HV | X | X | X | X | X | ||
| JCMAS HK VG32W (JCMAS P 041:2004) | X | ||||||
| JCMAS HK VG46W (JCMAS P 041:2004) | X | ||||||
| Arburg | X | ||||||
| Krauss-Maffei Kunststofftechnik | X | ||||||
| Voith VN108 4.3.3 | X | X | X | ||||
| HOCNF Norway/NEMS | X | X | X | X | X | X | X |
| Mobil DTE 10 Excel Series has the following builder approvals: | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
| BoschRexroth Fluid Rating List 90245 | X | X | X | ||||
| Denison HF-0 | X | X | X | ||||
| Eaton Vickers 694 (encompasses former I-286-S, M-2950-S or M-2952-S) | X | X | X | ||||
| Frank Mohn, Framo hydraulic cargo pumping | X | ||||||
| Fives Cincinnati P-69 | X | ||||||
| Fives Cincinnati P-70 | X | ||||||
| ORTLINGHAUS-WERKE GMBH ON 9.2.10 | X | X | X | X | |||
| STROMAG AG TM-000 327 | X |
Typical Properties
Mobil DTE10 Excel 15 22 32 46 68 100 150 ISO Viscosity Grade 15 22 32 46 68 100 150 Viscosity, ASTM D 445 cSt @ 40º C 15.8 22.4 32.7 45.6 68.4 99.8 155.6 cSt @ 100º C 4.07 5.07 6.63 8.45 11.17 13.00 17.16 Viscosity Index, ASTM D 2270 168 164 164 164 156 127 120 Brookfield Viscosity ASTM D 2983, cP @ -20 °C 1090 1870 3990 11240 34500 Brookfield Viscosity ASTM D 2983, cP @ -30 °C 3360 7060 16380 57800 Brookfield Viscosity ASTM D 2983, cP @ -40 °C 2620 6390 14240 55770 Tapered Roller Bearing (CEC L-45-A-99), % Viscosity Loss 5 5 5 7 11 7 7 Density 15º C, ASTM D 4052, kg/L 0.8375 0.8418 0.8468 0.8502 0.8626 0.8773 0.8821 Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100º C 1B 1B 1B 1B 1B 1B 1B FZG Gear Test, DIN 51354, Fail Stage - - 12 12 12 12 12 Pour Point, ºC, ASTM D 97 -54 -54 -54 -45 -39 -33 -30 Flash Point, ºC, ASTM D 92 182 224 250 232 240 258 256 Foam Sequence I, II, III, ASTM D 892 , ml 20/0 20/0 20/0 20/0 20/0 20/0 20/0 Dielectric Strength, kV, ASTM D877 45 54 49 41 Acute Aquatic Toxicity (LC-50, OECD 203) pass pass pass pass pass pass pass
| Mobil DTE10 Excel | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
| ISO Viscosity Grade | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
| Viscosity, ASTM D 445 | |||||||
| cSt @ 40º C | 15.8 | 22.4 | 32.7 | 45.6 | 68.4 | 99.8 | 155.6 |
| cSt @ 100º C | 4.07 | 5.07 | 6.63 | 8.45 | 11.17 | 13.00 | 17.16 |
| Viscosity Index, ASTM D 2270 | 168 | 164 | 164 | 164 | 156 | 127 | 120 |
| Brookfield Viscosity ASTM D 2983, cP @ -20 °C | 1090 | 1870 | 3990 | 11240 | 34500 | ||
| Brookfield Viscosity ASTM D 2983, cP @ -30 °C | 3360 | 7060 | 16380 | 57800 | |||
| Brookfield Viscosity ASTM D 2983, cP @ -40 °C | 2620 | 6390 | 14240 | 55770 | |||
| Tapered Roller Bearing (CEC L-45-A-99), % Viscosity Loss | 5 | 5 | 5 | 7 | 11 | 7 | 7 |
| Density 15º C, ASTM D 4052, kg/L | 0.8375 | 0.8418 | 0.8468 | 0.8502 | 0.8626 | 0.8773 | 0.8821 |
| Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100º C | 1B | 1B | 1B | 1B | 1B | 1B | 1B |
| FZG Gear Test, DIN 51354, Fail Stage | - | - | 12 | 12 | 12 | 12 | 12 |
| Pour Point, ºC, ASTM D 97 | -54 | -54 | -54 | -45 | -39 | -33 | -30 |
| Flash Point, ºC, ASTM D 92 | 182 | 224 | 250 | 232 | 240 | 258 | 256 |
| Foam Sequence I, II, III, ASTM D 892 , ml | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 |
| Dielectric Strength, kV, ASTM D877 | 45 | 54 | 49 | 41 | |||
| Acute Aquatic Toxicity (LC-50, OECD 203) | pass | pass | pass | pass | pass | pass | pass |
Health ａnd Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application ａnd the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS＇s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
【Mobil DTE™ Oil Named Series
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application ａnd the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS＇s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Mobil Industrial, United States
View the Mobil DTE Named SeriesPremium Performance Circulating Lubricants
Mobil Industrial, United States
Premium Performance Circulating Lubricants
Product Description
The Mobil DTE™ Oil Named Series of lubricants are premium performance circulating lubricants designed for applications including steam ａnd hydro turbine sets ａnd other systems where long lubricant service life is required. Mobil DTE Oil Named Series lubricants are formulated from highly refined base stocks ａnd an additive system which provide an extremely high level of chemical ａnd thermal stability, rapid ａnd complete separation from water ａnd a high resistance to emulsification. They provide excellent protection against rust ａnd corrosion, including resistance to salt water, ａnd good antiwear properties. They have a high viscosity index which ensures minimum variation of film thickness with temperature ａnd minimum power loss during the warm up period. These grades have excellent air release properties which allow entrained air to separate, thus avoiding pump cavitation ａnd erratic operation.
Mobil DTE Oil Named are the lubricants of choice for many users because of their reputation for long life, excellent equipment protection ａnd outstanding versatility in the wide variety of industrial applications. DTE Oil Named lubricants are used widely in steam turbines ａnd hydroturbines with splash, bath ａnd ring-oiling arrangements, ａnd all other continuous circulation methods involving pumps, valves ａnd ancillary equipment. This product series is recommended for continous service in the lubrication of plain ａnd rolling bearings ａnd parallel shaft gearing. They have also been used successfully in rotary air compressor applications ａnd reciprocating natural gas compressors as well as vacuum pumps. Their reputation is based on many decades of successful service ａnd satisfied users.
The Mobil DTE™ Oil Named Series of lubricants are premium performance circulating lubricants designed for applications including steam ａnd hydro turbine sets ａnd other systems where long lubricant service life is required. Mobil DTE Oil Named Series lubricants are formulated from highly refined base stocks ａnd an additive system which provide an extremely high level of chemical ａnd thermal stability, rapid ａnd complete separation from water ａnd a high resistance to emulsification. They provide excellent protection against rust ａnd corrosion, including resistance to salt water, ａnd good antiwear properties. They have a high viscosity index which ensures minimum variation of film thickness with temperature ａnd minimum power loss during the warm up period. These grades have excellent air release properties which allow entrained air to separate, thus avoiding pump cavitation ａnd erratic operation.
Mobil DTE Oil Named are the lubricants of choice for many users because of their reputation for long life, excellent equipment protection ａnd outstanding versatility in the wide variety of industrial applications. DTE Oil Named lubricants are used widely in steam turbines ａnd hydroturbines with splash, bath ａnd ring-oiling arrangements, ａnd all other continuous circulation methods involving pumps, valves ａnd ancillary equipment. This product series is recommended for continous service in the lubrication of plain ａnd rolling bearings ａnd parallel shaft gearing. They have also been used successfully in rotary air compressor applications ａnd reciprocating natural gas compressors as well as vacuum pumps. Their reputation is based on many decades of successful service ａnd satisfied users.
Features ａnd Benefits
The Mobil DTE family of products is well known ａnd highly regarded worldwide based on their outstanding performance ａnd the R & D expertise ａnd the global technical support which stand behind the brand. The highly versatile performance of Mobil DTE Oil Named oils has made them the oil of choice for a multitude of industrial equipment applications around the world.
Mobil DTE Named oils enjoy an excellent reputation in the lubrication of the circulation systems of steam turbines ａnd hydro turbines, including geared turbines, plus a wide variety of ancillary equipment. As designs change ａnd increase in severity, it is the challenge of our formulation scientists to understand the effect of these changes on the lubricant ａnd to formulate these products for the broad versatility they are recognised for.
For the Mobil DTE Oil Named Series of lubricants, this process has resulted in the use of special base stocks for outstanding oxidation stability, plus a unique additive combination to ensure the excellent, wide-ranging performance of these oils. A review of the features, advantages ａnd potential benefits of the product are shown below.
Features Advantages ａnd Potential Benefits Very high level of chemical ａnd thermal stability ａnd resistance to sludging ａnd varnishing Long oil charge life in circulation systems ａnd reduced oil replacement costs Less unplanned downtime ａnd reduced maintenance costs Excellent water release properties Improved operating efficiency Very good antiwear protection Longer equipment life, reduced maintenance ａnd downtime Long term protection against rust ａnd corrosion Longer equipment life, reduced maintenance ａnd downtime High resistance to foaming ａnd excellent air release Avoids pump cavitation, noisy ａnd erratic operation Highly versatile - multiple applications Rationalize inventory, reduced inventory costs
The Mobil DTE family of products is well known ａnd highly regarded worldwide based on their outstanding performance ａnd the R & D expertise ａnd the global technical support which stand behind the brand. The highly versatile performance of Mobil DTE Oil Named oils has made them the oil of choice for a multitude of industrial equipment applications around the world.
Mobil DTE Named oils enjoy an excellent reputation in the lubrication of the circulation systems of steam turbines ａnd hydro turbines, including geared turbines, plus a wide variety of ancillary equipment. As designs change ａnd increase in severity, it is the challenge of our formulation scientists to understand the effect of these changes on the lubricant ａnd to formulate these products for the broad versatility they are recognised for.
For the Mobil DTE Oil Named Series of lubricants, this process has resulted in the use of special base stocks for outstanding oxidation stability, plus a unique additive combination to ensure the excellent, wide-ranging performance of these oils. A review of the features, advantages ａnd potential benefits of the product are shown below.
| Features | Advantages ａnd Potential Benefits |
| Very high level of chemical ａnd thermal stability ａnd resistance to sludging ａnd varnishing | Long oil charge life in circulation systems ａnd reduced oil replacement costs |
| Less unplanned downtime ａnd reduced maintenance costs | |
| Excellent water release properties | Improved operating efficiency |
| Very good antiwear protection | Longer equipment life, reduced maintenance ａnd downtime |
| Long term protection against rust ａnd corrosion | Longer equipment life, reduced maintenance ａnd downtime |
| High resistance to foaming ａnd excellent air release | Avoids pump cavitation, noisy ａnd erratic operation |
| Highly versatile - multiple applications | Rationalize inventory, reduced inventory costs |
Applications
The Mobil DTE Oil Named Series of lubricants are premium performance circulating lubricants designed for applications where long lubricant service life is required. Specific applications include:
- Land-based ａnd marine steam turbine, hydro turbine ａnd some gas turbine circulation systems, including pumps, valves ａnd other ancillary equipment
- Continuous service in plain ａnd roller bearings ａnd parallel shaft gearing
- Turbines with oil supplied by splash, bath, ring oiling or other mechanical means
- Moderate severity hydraulic pumps
- Compressors ａnd vacuum pumps handling air, natural gas, ａnd inert gases, ａnd with discharge temperatures not exceeding 150C
The Mobil DTE Oil Named Series of lubricants are premium performance circulating lubricants designed for applications where long lubricant service life is required. Specific applications include:
- Land-based ａnd marine steam turbine, hydro turbine ａnd some gas turbine circulation systems, including pumps, valves ａnd other ancillary equipment
- Continuous service in plain ａnd roller bearings ａnd parallel shaft gearing
- Turbines with oil supplied by splash, bath, ring oiling or other mechanical means
- Moderate severity hydraulic pumps
- Compressors ａnd vacuum pumps handling air, natural gas, ａnd inert gases, ａnd with discharge temperatures not exceeding 150C
Specifications ａnd Approvals
Mobil DTE Named Series meets or exceeds the requirements of: Mobil DTE Light Mobil DTE Medium Mobil DTE Heavy Medium Mobil DTE Heavy DIN 51515-1: 2010-02 X X X X DIN 51517-2: 2009-06 X X X X GE GEK 46506D X GE GEK 27070 X GE GEK 28143A X X JIS K-2213 Type 2 w/Additives (1983) X X X
| Mobil DTE Named Series meets or exceeds the requirements of: | Mobil DTE Light | Mobil DTE Medium | Mobil DTE Heavy Medium | Mobil DTE Heavy |
| DIN 51515-1: 2010-02 | X | X | X | X |
| DIN 51517-2: 2009-06 | X | X | X | X |
| GE GEK 46506D | X | |||
| GE GEK 27070 | X | |||
| GE GEK 28143A | X | X | ||
| JIS K-2213 Type 2 w/Additives (1983) | X | X | X |
Typical Properties
Mobil DTE Named Series Mobil DTE Light Mobil DTE Medium Mobil DTE Heavy Medium Mobil DTE Heavy ISO Viscosity Grade 32 46 68 100 Viscosity, ASTM D 445 cSt @ 40º C 31 44.5 65.1 95.1 cSt @ 100º C 5.5 6.9 8.7 10.9 Viscosity Index, ASTM D 2270 102 98 95 92 Pour Point, ºC, ASTM D 97 -18 -15 -15 -15 Flash Point, ºC, ASTM D 92 218 221 223 237 Density @15º C kg/l, ASTM D 4052 0.85 0.86 0.87 0.88 TOST, ASTM D 943, Hours to 2 NN 5000 3700 4500 4500 Rust Prevention, ASTM D 665: Distilled Water Pass Pass Pass Pass Sea Water Pass Pass Pass Pass Water Seperability, ASTM D 1401,Min. to 3 ml emulsion @ 54ºC 15 15 20 30 Copper Strip Corrosion, ASTM D 130,3 hrs @ 121º C 1B 1B 1B 1B Foam Test, ASTM D 892, Seq I Tendency/stability, ml/ml 20/0 50/0 50/0 50/0
| Mobil DTE Named Series | Mobil DTE Light | Mobil DTE Medium | Mobil DTE Heavy Medium | Mobil DTE Heavy |
| ISO Viscosity Grade | 32 | 46 | 68 | 100 |
| Viscosity, ASTM D 445 | ||||
| cSt @ 40º C | 31 | 44.5 | 65.1 | 95.1 |
| cSt @ 100º C | 5.5 | 6.9 | 8.7 | 10.9 |
| Viscosity Index, ASTM D 2270 | 102 | 98 | 95 | 92 |
| Pour Point, ºC, ASTM D 97 | -18 | -15 | -15 | -15 |
| Flash Point, ºC, ASTM D 92 | 218 | 221 | 223 | 237 |
| Density @15º C kg/l, ASTM D 4052 | 0.85 | 0.86 | 0.87 | 0.88 |
| TOST, ASTM D 943, Hours to 2 NN | 5000 | 3700 | 4500 | 4500 |
| Rust Prevention, ASTM D 665: | ||||
| Distilled Water | Pass | Pass | Pass | Pass |
| Sea Water | Pass | Pass | Pass | Pass |
| Water Seperability, ASTM D 1401,Min. to 3 ml emulsion @ 54ºC | 15 | 15 | 20 | 30 |
| Copper Strip Corrosion, ASTM D 130,3 hrs @ 121º C | 1B | 1B | 1B | 1B |
| Foam Test, ASTM D 892, Seq I Tendency/stability, ml/ml | 20/0 | 50/0 | 50/0 | 50/0 |
Health ａnd Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application ａnd the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS＇s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design ａnd DTE are trademarks of ExxonMobil Corporation, or one of its subsidiaries.
【、Mobil DTE™ 20 Reihe
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application ａnd the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS＇s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design ａnd DTE are trademarks of ExxonMobil Corporation, or one of its subsidiaries.
Mobil Industrial, Deutschland
Hydrauliköle
Produktbeschreibung
Die Produkte der Mobil DTE™ 20 Reihe sind Hochleistungs-Hydrauliköle mit Verschleißschutz.
Sie erfüllen die strengen Anforderungen von Hochdruck-Hydrauliksystemen, Hochleistungspumpen sowie anderen Hydrauliksystembauteilen wie beispielsweise Servoventilen mit engen Toleranzen und numerisch gesteuerten (NC-) Werkzeugemaschinen.
Diese Produkte erfüllen die rigorosen Leistungsanforderungen von Herstellern eines breiten Spektrums von Hydrauliksystemen und Bauteilen. Sie ermöglichen die Verwendung von nur einem Produkt mit ausgezeichneten Leistungsmerkmalen.
Eigenschaften und vorteile
- Ihre ausgezeichnete Oxidationsstabilität trägt dazu bei, die Bildung von Ablagerungen zu reduzieren, die Systeme sauber zu halten sowie die Öllebensdauer und die Filterstandzeiten zu verlängern. Das hilft, Wartungszeiten und Kosten zu minimieren.
- Der ausgezeichnete Verschleiß- und Korrosionsschutz von Anlagenkomponenten unterschiedlicher Metallurgie trägt zur Verlängerung der Standzeiten der Bauteile und zu einer Verbesserung der Produktionskapazität bei.
- Kontrollietes Demulgierverhalten schützt die Systeme vor kleinen und großen Wassermengen.
- "Ultra-Keep-Clean" -Eigenschaften reduzieren Ablagerungen und Schlamm im System und tragen zum Schutz der Anlage und zu längeren Standzeiten bei. Sie verringern die Wartungskosten und verbessern insgesamt die Anlagenleistung.
- Qualitätsreserven sichern das Leistungsverhalten selbst unter schwierigen Betriebsbedingungen und bei verlängerten Ölwechselintervallen.
Anwendung
- Hydrauliksysteme, die kritisch auf Ablagerungen reagieren oder bei denen sich Schlamm und Ablagerungen durch Vermischung mit konventionellen Produkten bilden können.
- Hydrauliksysteme, die ein hohes Lasttragevermögen und sicheren Verschleißschutz benötigen und Systeme bei denen ein Dünnfilm-Korrosionsschutz gefordert ist
- Wo kleine Wassermengen unvermeidlich sind
- Systeme mit Getriebe und Lager
- Maschinen, die eine Vielzahl von Bauteilen unterschiedlicher Metallurgie aufweisen
Spezifikationen / freigaben
| Mobil DTE 20 Series erfüllt oder übertrifft die Anforderungen von: | MOBIL DTE 22 | MOBIL DTE 24 | MOBIL DTE 25 | MOBIL DTE 26 | MOBIL DTE 27 |
| DIN 51524-2: 2006-09 | X | X | X | X |
| Mobil DTE 20 Series hat von den folgenden Herstellern Zulassungen: | MOBIL DTE 22 | MOBIL DTE 24 | MOBIL DTE 25 | MOBIL DTE 26 | MOBIL DTE 27 |
| DENISON HF-0 | X | X | X | ||
| HUSKY HS 207 | X | ||||
| VICKERS I-286-S | X | X | X | ||
| VICKERS M-2950-S | |||||
| Fives Cincinnati | X | X | X | ||
| HOCNF | X | X | X | X |
Typische produktdaten
| MOBIL DTE 21 | MOBIL DTE 22 | MOBIL DTE 24 | MOBIL DTE 25 | MOBIL DTE 26 | MOBIL DTE 27 | MOBIL DTE 28 | |
| ISO VG, | 10 | 22 | 32 | 46 | 68 | 100 | 150 |
| Viskosität, ASTM D445 | |||||||
| cSt @ 100°C | 2.7 | 4.5 | 5.3 | 6.7 | 8.5 | 10.9 | 14.3 |
| cSt @ 40°C | 10 | 21 | 31.5 | 44.2 | 71.2 | 95.3 | 142.8 |
| Viscosity Index, ASTM D2270 | 98 | 98 | 98 | 98 | 98 | 98 | 98 |
| Pour Point, °C, ASTM D97 | -30 | -30 | -27 | -27 | -21 | -21 | -15 |
| Flammpunkt, COC, ASTM D92 | 174 | 200 | 220 | 232 | 236 | 248 | 276 |
| Schaumverhalten, Sequenz I, Tendenz/Stabilität, ASTM D892 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 |
| Schaumverhalten, Sequenz II, Tendenz/Stabilität, ASTM D892 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 |
| Schaumverhalten, Sequenz III, Tendenz/Stabilität, ASTM D892 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 |
| Kupferkorrosion, 3 Std. bei 100°C, ASTM D130 | 1B | 1B | 1B | 1B | 1B | 1B | 1B |
| Rostschutz, Verfahren B, ASTM D665 | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
| ****FZG Schadenskraftstufe, ISO 14635-1(mod) | 12 | 12 | 12 | 12 | 12 |
