Product description

UNISILKON L 250 L is a special lubricant based on silicone oil ａnd PTFE with high thermal stability. UNISILKON L 250 L offers good penetration ability in small lubrication gaps ａnd lube points of difficult access. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. UNISILKON L 250 L is resistant to cold ａnd hot water, superheated steam up to approx. 130 °C as well as industrial cleaning agents ａnd disinfectants. UNISILKON L 20 L is also resistant to pumpable foodstuffs ａnd beverages like fruit juices, beer or milk products. UNISILKON L 250 L is not resistant to organic solvents or strong acid ａnd alkaline solutions.

UNISILKON L 250 L is NSF H1 registered ａnd therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products ａnd packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 250 L can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Proven effective in valves ａnd fittings as well as adjusting mechanisms in the drinking water, beverage, sanitary ａnd heating sectors

• Certified acc. to international standards for valves ａnd fittings, e.g. DVGW-KTW, WRAS, ACS, AS 4020, NSF Standard 61 ａnd NSF H1

• Long-term protection of seals ａnd bearings owing to the lubricant’s good resistance to numerous media like disinfectants, cleaning agents, water, steam

Product description

UNISILKON L 200 is a special lubricating grease based on silicone oil ａnd PTFE. The product meets the legislative provisions of the German Health Authority governing the use of plastics ａnd drinking water (DVGW-KTW). It is also approved by WRC (Water Research Centre), Great Britain.

Benefits for your application

• Good sealing effect

• High thermal stability

• High resistance to many aqueous solutions

• Neutral towards many plastics ａnd elastomers, e.g. ABS, PC, EPDM, NBR

• Excellent resistance to cold ａnd hot water, water steam

• Certified acc. to DVGW-KTW ａnd WRC

Product description

Manufacturers ａnd operators in the wood, textile or paper industry have to lubricate rolling bearings subject to high temperatures.

We designed UNISILKON L 50/2 to meet these requirements.

UNISILKON L 50/2 is a high-temperature grease for rolling ａnd plain bearings based on silicone oil ａnd PTFE solid lubricants suitable for a wide service temperature range.

The long-term grease UNISILKON L 50/2 has a good wetting ability on metal surfaces ａnd offers good wear protection, resistance to ambient media ａnd thermal stability. You can extend relubrication intervals ａnd reduce cleaning ａnd maintenance costs, so UNISILKON L 50/2 can reduce your operating costs.

Benefits for your application

• Made of special raw materials to ensure long-term ａnd for-life lubrication at high temperatures

• Wear reduction for increased component availability due to its good pressure absorption capacity

• Versatile use due to good compatibility with aqueous solutions

Product description

UNIMOLY GB 2 is a high-temperature lubricating grease based on mineral oil, silicate ａnd molybdenum disulphide.

Benefits for your application

• For lubrication points subject to high loads

• Emergency running properties

• Good dampening effect

Product description

Benefits for your application

• High-performance grease containing MoS₂

• Good corrosion protection

• Ageing ａnd oxidation resistant

• Reduces wear

• Water resistant

Product description

Benefits for your application

• High-performance grease with MoS₂

• Reduces wear

• Good corrosion protection

• Resistant to ageing ａnd oxidation

• Good worked stability

Product description

Benefits for your application

• High load-carrying capacity

• Wear protection

Product description

Benefits for your application

• High load-carrying capacity

• Wear protection

Product description

Benefits for your application

• High load-carrying capacity

• Wear protection

Product description

UNISILKON GLK 112 ensures smooth running of components at low temperatures ａnd is at the same time resistant to high temperatures. It is based on silicone oil ａnd a special lithium soap. The product is compatible with many different elastomers (but not silicone rubber) ａnd plastics. Approval VW TL 767 X.

Benefits for your application

• Good low-temperature characteristics ａnd wide service temperature range

• Good compatibility with elastomers ａnd plastics

• Good wetting of functional surfaces

Product description

VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil ａnd mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion ａnd wear protection, resistance to water ａnd media as well as ageing ａnd oxidation stability.

Benefits for your application

• Savings in costs for bearings due to the good corrosion ａnd wear protection as well as pressure absorption capacity of the grease, therefore long service life ａnd maintenance intervals

• Reduced wastewater disposal costs due to good water resistance resulting in a long service life ａnd relubrication intervals

• Trouble-free operation of machines due to easy pumpability ａnd metering in central lubrication systems

Product description

ASONIC GLY 32 is a synthetic low-noise lubricating grease manu­factured in a clean environment.

The product components used ａnd the grease’s low base-oil viscosity yield a very high speed factor ａnd a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.

Benefits for your application

• Low-temperature rolling bearing grease

• Synthetic lubricant

• Low noise

• High purity

• Low frictional torque

Product description

The high performance ASONIC GHY 72 is due to its optimised mix of product components: ester oil, polyurea thickener, a special additive package, combined in a special ａnd clean manufacturing environment. This ensures the extraordinary features of ASONIC GHY 72 for use in rolling bearings:

• high purity

• low noise

• long shelf life

• high resistance to water

• good corrosion protection

Benefits for your application

• Wide service temperature range

• Long service life

• Synthetic lubricant

• Low noise

Product description

AMBLYGON TA 30/1 ａnd TA 30/2 are long-term ａnd high-temperature lubricating greases based on mineral oil ａnd polyurea.

These lubricating greases are used for long-term lifetime lubrication in the machine-building sector covering a wide service temperature range up to 160 °C. AMBLYGON TA 30/1 ａnd TA 30/2 offer good adhesion, resistance to hot water ａnd diluted alkaline ａnd acid solutions. AMBLYGON TA 30/1 ａnd TA 30/2 are resistant to oxidation ａnd ageing ａnd protect against corrosion.

Benefits for your application

• Good resistance to ambient media, water ａnd water steam

• Good corrosion protection

• Good adhesion

• Good sealing effect

• Suitable up to 160 °C