Product description

SYNTHESO GLK 0 ａnd GLK 1 are special lubricating greases for a wide variety of applications with an almost neutral behaviour towards many elastomers (also EPDM) ａnd plastics. Both products offer excellent wear protection, high load-carrying capacity, good adhesion ａnd resistance to water.

Benefits for your application

• Special lubricants for the assembly ａnd lifetime lubrication of elastomers

• Almost neutral towards EPDM/metal or plastic sliding material combinations

Product description

SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) ａnd plastics (except PC ａnd ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range ａnd offers efficient protection against wear, good adhesion ａnd resistance to water.

Benefits for your application

• Special lubricating grease for the assembly ａnd lifetime lubrication of elastomers

• Almost neutral towards most sliding material pairings like EPDM/metal or plastic

• Reduces friction ａnd wear

Product description

SYNTHESO D oils are synthetic high-temperature oils on a polyglycol basis. They are very resistant to ageing ａnd oxidation ａnd have a very good viscosity-temperature relation.

Benefits for your application

• Good resistance to ageing ａnd oxidation

• Excellent viscosity-temperature relation

Product description

SYNTHESIN PDL 250/01 is fully synthetic grease for the lubrication of electrical contacts. It can be used for all conventional contact materials.

Benefits for your application

• Suitable for very low temperatures

• Good corrosion protection

Product description

STRUCTOVIS HD is a special lubricant series based on mineral oil ａnd available in different viscosity grades.

Note: The product data of STRUCTOVIS BHD Spray ａnd STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Benefits for your application

• Good wear protection

• Good corrosion protection

• Adhesive

• Noise dampening (depending on viscosity)

• Emergency lubricating properties (BHD MF)

Product description

STRUCTOVIS HD is a special lubricant series based on mineral oil ａnd available in different viscosity grades.

Note: The product data of STRUCTOVIS BHD Spray ａnd STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Benefits for your application

• Good wear protection

• Good corrosion protection

• Adhesive

• Noise dampening (depending on viscosity)

• Emergency lubricating properties (BHD MF)

Product description

STRUCTOVIS HD is a special lubricant series based on mineral oil ａnd available in different viscosity grades.

Note: The product data of STRUCTOVIS BHD Spray ａnd STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Benefits for your application

• Good wear protection

• Good corrosion protection

• Adhesive

• Noise dampening (depending on viscosity)

• Emergency lubricating properties (BHD MF)

Product description

STRUCTOVIS HD is a special lubricant series based on mineral oil ａnd available in different viscosity grades.

Note: The product data of STRUCTOVIS BHD Spray ａnd STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Benefits for your application

• Good wear protection

• Good corrosion protection

• Adhesive

• Noise dampening (depending on viscosity)

• Emergency lubricating properties (BHD MF)

Product description

STRUCTOVIS HD is a special lubricant series based on mineral oil ａnd available in different viscosity grades.

Note: The product data of STRUCTOVIS BHD Spray ａnd STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Benefits for your application

• Good wear protection

• Good corrosion protection

• Adhesive

• Noise dampening (depending on viscosity)

• Emergency lubricating properties (BHD MF)

Product description

STRUCTOVIS HD is a special lubricant series based on mineral oil ａnd available in different viscosity grades.

Note: The product data of STRUCTOVIS BHD Spray ａnd STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Benefits for your application

• Good wear protection

• Good corrosion protection

• Adhesive

• Noise dampening (depending on viscosity)

• Emergency lubricating properties (BHD MF)

Product description

STABUTHERM GH 461 ａnd STABUTHERM GH 462 are high-temperature lubricating greases based on mineral oil ａnd polyurea. They have a wide service temperature range ａnd can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 461 ａnd STABUTHERM GH 462 feature highly effective anti-wear properties. The greases are very adhesive ａnd resistant to water both under static ａnd dynamic load. STABUTHERM GH 461 ａnd STABUTHERM GH 462 are resistant to oxidation ａnd provide reliable protection against corrosion.

Benefits for your application

• Reduction of lubricant costs due to

  • lower consumption

  • reduced waste water disposal costs due to excellent water resistance

• Longer component life ans trouble-free operation due to

  • good wear protection, good load- carrying capacity even at high temperatures

  • excellent corrosion protection

• Proven pumpability ａnd metering in central lubrication systems

Product description

STABUTHERM GH 461 ａnd STABUTHERM GH 462 are high-temperature lubricating greases based on mineral oil ａnd polyurea. They have a wide service temperature range ａnd can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 461 ａnd STABUTHERM GH 462 feature highly effective anti-wear properties. The greases are very adhesive ａnd resistant to water both under static ａnd dynamic load. STABUTHERM GH 461 ａnd STABUTHERM GH 462 are resistant to oxidation ａnd provide reliable protection against corrosion.

Benefits for your application

• Reduction of lubricant costs due to

  • lower consumption

  • reduced waste water disposal costs due to excellent water resistance

• Longer component life ans trouble-free operation due to

  • good wear protection, good load- carrying capacity even at high temperatures

  • excellent corrosion protection

• Proven pumpability ａnd metering in central lubrication systems

Product description

STABURAGS NBU 8 EP is a lubricating grease based on mineral oil ａnd barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion ａnd is resistant to water.

Benefits for your application

• Good corrosion protection

• Good resistance to ambient media

• Good wear protection / EP properties

• Protects against tribo-corrosion

• High-pressure grease

Product description

STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water ａnd protects against tribo-corrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.

Benefits for your application

• Assembly grease protecting against tribo-corrosion

• Good corrosion protection

• Excellent resistance to water even under outdoor conditions

• Approved by the company Knorr Bremse, N 12006-37

Product description

STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil ａnd barium complex soap. Both greases offer excellent corrosion protection, resistance to water ａnd ambient media as well as wear protection, load-carrying capacity ａnd resistance to tribocorrosion.

Benefits for your application

• Good corrosion protection

• Excellent resistance to ambient media

• High wear protection

• Good resistance to tribo-corrosion

• Good load-carrying capacity

• Good sealing effect

Product description

STABURAGS NBU 12 G 10 ａnd 30 G are lubricating greases based on mineral oil, barium complex soap ａnd solid lubricants. Both greases offer good wear protection ａnd are suitable for high loads in the mixed friction regime. In addition, they protect against corrosion ａnd are resistant to water as well as many diluted alkaline ａnd acid solutions.

Benefits for your application

• Good corrosion protection

• Good resistance to ambient media

• Excellent wear protection

• Good load-carrying capacity

Product description

The industry imposes increasingly diverse ａnd stringent requirements on lubricating greases. Many applications require greases offering good wear protection, high mechano-dynamical stability ａnd water resistance.

For such requirements we developed STABURAGS NBU 30, a lubricating grease based on mineral oil ａnd a barium complex soap.

STABURAGS NBU 30 offers good wear ａnd corrosion protection as well as resistance to water ａnd many diluted alkaline ａnd acidic solutions, thus extending relubrication intervals ａnd reducing operating costs.

Benefits for your application

• Long component life due to good corrosion protection in humid ａnd aggressive environment

• Good resistance to water, water vapour ａnd many diluted alkaline ａnd acidic solutions

• Good sealing characteristics with water, hot water, water vapour ａnd aggressive media

• High wear protection in a wide range of mechano-dynamical loads ａnd at high surface pressures

• NSF H2 registered

Product description

STABURAGS NBU 12/300 KP is a rolling ａnd plain bearing grease based on mineral oil ａnd a barium complex soap thickener. It offers good wear protection ａnd good pressure absorption.

STABURAGS NBU 12/300 KP is resistant to water ａnd protects reliably against corrosion.

Benefits for your application

• Rolling ａnd plain bearing grease

• Good corrosion protection

• Good pressure absorption

• Resistant to water

• Long-term grease

• Reliable wear protection

Product description

Benefits for your application

• Good pressure resistance in bearings subject to high loads

• Long component life due to good wear protection

• Trouble-free operation due to good sealing ａnd corrosion protection

• Less maintenance due to long-term lubrication

• Emergency lubricating properties for improved functionality in the case of starved lubrication

Product description

STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil ａnd barium complex soap. Both greases offer excellent corrosion protection, resistance to water ａnd ambient media as well as wear protection, load-carrying capacity ａnd resistance to tribocorrosion.

Benefits for your application

• Good corrosion protection

• Excellent resistance to ambient media

• High wear protection

• Good resistance to tribo-corrosion

• Good load-carrying capacity

• Good sealing effect

Product description

STABURAGS NBU 12 ALTEMP is a mineral oil based lubricating grease for plain ａnd rolling bearings operating at low to medium speeds. It has proven effective in lubricating points subject to external vibrations or oscillations. Containing solid lubricants, STABURAGS NBU 12 ALTEMP protects against fretting corrosion ａnd is resistant to hot water.

Benefits for your application

• For plain ａnd rolling bearings

• Good corrosion protection

• Resistant to hot water

• Suitable for assembly purposes

• Effective on lubrication points subject to external vibrations

• Protects against tribo-corrosion

Product description

STABURAGS NBU 4, 12 are lubricating greases based on mineral oil ａnd barium complex soap. These products are resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, they are resistant to corrosion, water ａnd many diluted alkaline ａnd acid solutions

Benefits for your application

• Good corrosion protection

• Good resistance to ambient media

• Excellent wear protection

• Good resistance to tribo-corrosion

• Good load-carrying capacity

• Good sealing effect

Product description

Benefits for your application

• Good pressure resistance in bearings subject to high loads

• Long component life due to good wear protection

• Trouble-free operation due to good sealing ａnd corrosion protection

• Less maintenance due to long-term lubrication

• Emergency lubricating properties for improved functionality in the case of starved lubrication

Product description

STABURAGS NBU 4, 12 are lubricating greases based on mineral oil ａnd barium complex soap. These products are resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, they are resistant to corrosion, water ａnd many diluted alkaline ａnd acid solutions

Benefits for your application

• Good corrosion protection

• Good resistance to ambient media

• Excellent wear protection

• Good resistance to tribo-corrosion

• Good load-carrying capacity

• Good sealing effect

Product description

STABURAGS N 32 is a gas valve grease resistant to high temperatures. It contains solid lubricant particles which ensure emergency lubrication. The product has been tested ａnd approved in accordance with DIN EN 377 (lubricants for gas units ａnd actuators). It has been registered by DIN-DVGW under the number NG 5162 AR 0898, temperature class DIN EN 377: D, operating temperature range 0 to 140 °C.

Benefits for your application

• High-temperature grease for gas valves

• Good emergency lubricating properties

Product description

STABURAGS N 12 MF is a mineral oil grease for long-term applications, as well as plain ａnd rolling bearings operating at high temperatures ａnd medium speeds. The solid lubricant it contains (MoS2) ensures emer-gency operation at increased tem-peratures or loads.

Benefits for your application

• Good corrosion protection

• Reduces wear

• Good emergency lubrication properties due to solid lubricant

Product description

STABURAGS N 12 is a mineral oil based grease for long-term lubrication. It is a rolling bearing grease suitable for a wide temperature ａnd speed range.

Benefits for your application

• Good corrosion protection

• Long-term grease

Product description

STABURAGS N 4 is a lubricating grease based on mineral oil for rolling ａnd plain bearings. Due to the low base oil viscosity it is especially suitable for high speeds. The high thermal stability of the sodium complex soap thickener ensures long service life ａnd high aging resistance.

Benefits for your application

• Good thermal stability

• Resistant to aging

• Long-term lubrication

Product description

STABURAGS B 15 A 300 is a special lubricating grease based on mineral oil, sodium soap ａnd special extreme-pressure additives.

Benefits for your application

• Contains EP additives

• Wear protection

• High-temperature grease

• Suitable for use in central lubrication systems

Product description

STABURAGS B 15 A 300 is a special lubricating grease based on mineral oil, sodium soap ａnd special extreme-pressure additives.

Benefits for your application

• Contains EP additives

• Wear protection

• High-temperature grease

• Suitable for use in central lubrication systems

Product description

UNISILKON TK 002 are transparent, clear fluids based on methyl silicone. These oils offer good stability at low ａnd high temperatures.

UNISILKON TK 002/500, UNISILKON TK 002/1000 are NSF H1 registered ａnd therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products ａnd packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON TK 002/500, UNISILKON TK 002/1000 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Good low-temperature behaviour due to the low pour point

• High thermal stability

• Neutral towards many plastics ａnd elastomers

Product description

UNISILKON TK 002 are transparent, clear fluids based on methyl silicone. These oils offer good stability at low ａnd high temperatures.

UNISILKON TK 002/500, UNISILKON TK 002/1000 are NSF H1 registered ａnd therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products ａnd packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON TK 002/500, UNISILKON TK 002/1000 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Good low-temperature behaviour due to the low pour point

• High thermal stability

• Neutral towards many plastics ａnd elastomers

Product description

UNISILKON LCA 3801 is a special lubricating grease neutral in odour ａnd taste ａnd based on silicone oil ａnd a calcium soap. It has been developed primarily for valves ａnd fittings as well as sanitary applications. UNISILKON LCA 3801 provides effective wetting even in narrow lubricating gaps ａnd friction points that are difficult to reach.

Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges.

UNISILKON LCA 3801 is resistant to many media used in the beverage industry ａnd to acid or alkaline disinfectants but not resistant to most organic solvents ａnd strong acids or lyes.

Benefits for your application

• For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers

• With load-bearing areas between 50 ａnd 99.9 %, good wetting behaviour ａnd good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component

• Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²

• Very good resistance to both cold ａnd hot water

• Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges

• Good sealing effect ａnd backflow from "lubricant depot"

• Compatible with most ceramics, metals, elastomers ａnd plastics

• Approved acc. to DGW-KTW (UBA guideline), NSF 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water

Product description

UNISILKON L 643 is a special lubricating grease based on silicone oil ａnd PTFE for valves ａnd other elements in the sanitary ａnd heating sector. It offers good penetration ability in small lubrication gaps ａnd lube points of difficult access. As its viscosity is rather independent from service temperatures, UNISILKON L 643 allows constant actuating forces within the whole cold/hot water range of single-lever mixer taps. The grease is resistant to many aqueous solutions as well as acid ａnd alkaline disinfectants. It is not compatible with most organic solvents, strong acid ａnd alkaline solutions.

Benefits for your application

• Excellent wetting power

• Operational smoothness due to a good viscosity-temperature behaviour

• Excellent resistant to hot ａnd cold water, steam

• High thermal stability

• Good sealing effect

• Neutral towards metals, elastomers ａnd plastics

Product description

UNISILKON L 641 N is a special lubricating grease based on silicone oil ａnd PTFE. It is intended for use in valves, fittings ａnd other applications in the sanitary, beverage ａnd heating sectors. UNISILKON L 641 N shows effective wetting also in narrow lubricating gaps ａnd friction points that are difficult to reach. As its viscosity is rather independent from service temperatures, UNISILKON L 641 N allows constant actuating forces within the whole cold/hot water range of single-lever mixer taps. Due to its chemical composition, UNISILKON L 641 N has shown to be resistant to various substances in the food-processing ａnd beverage industries like beer, milk, juices, liquors, acid ａnd alkaline disinfectants. It is not resistant to most organic solvents, strong acids ａnd alkaline solutions.

UNISILKON L 641 N is NSF H1-registered ａnd therefore in compliance with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products ａnd packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 641 N can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Very good wetting

• Operational smoothness due to the good viscosity-temperature behaviour

• Very good resistance to water ａnd water vapour

• High thermal stability

• Good sealing effect

• Neutral towards metals, many elastomers ａnd plastics

• NSF H1-registered

• Tested acc. to the guideline of the German Environmental Agency (UBA), WRAS, ACS ａnd NSF Standard 61

Product description

UNISILKON L 641 is a special lubricating grease based on silicone oil ａnd PTFE for valves ａnd other elements in the heating, beverage ａnd sanitary sector. UNISILKON L 641 offers good penetration ability in small lubrication gaps ａnd lube points of difficult access. As its viscosity is rather independent from service temperatures, UNISILKON L 641 allows constant actuating forces within the whole cold/hot water range of single-lever mixer taps. Due to its chemical composition, UNISILKON L 641 has shown to be resistant to various substances in the food-processing ａnd beverage industries like beer, milk, juices, liquors, acid ａnd alkaline disinfectants. UNISILKON L 641 is not compatible with most organic solvents as well as acid ａnd alkaline solutions.

UNISILKON L 641 is NSF H1 registered ａnd therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products ａnd packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 641 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Excellent wetting power

• Operational smoothness due to a good viscosity-temperature behaviour

• Very good resistance to water ａnd water vapour

• High thermal stability

• Good sealing effect

• Neutral towards metals, many elastomers ａnd plastics

• NSF H1 registered

• Tested acc. to the guideline of the German Environmental Agency (UBA), WRAS, ACS ａnd NSF Standard 61

Product description

UNISILKON L 250 L is a special lubricant based on silicone oil ａnd PTFE with high thermal stability. UNISILKON L 250 L offers good penetration ability in small lubrication gaps ａnd lube points of difficult access. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. UNISILKON L 250 L is resistant to cold ａnd hot water, superheated steam up to approx. 130 °C as well as industrial cleaning agents ａnd disinfectants. UNISILKON L 20 L is also resistant to pumpable foodstuffs ａnd beverages like fruit juices, beer or milk products. UNISILKON L 250 L is not resistant to organic solvents or strong acid ａnd alkaline solutions.

UNISILKON L 250 L is NSF H1 registered ａnd therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products ａnd packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 250 L can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Proven effective in valves ａnd fittings as well as adjusting mechanisms in the drinking water, beverage, sanitary ａnd heating sectors

• Certified acc. to international standards for valves ａnd fittings, e.g. DVGW-KTW, WRAS, ACS, AS 4020, NSF Standard 61 ａnd NSF H1

• Long-term protection of seals ａnd bearings owing to the lubricant’s good resistance to numerous media like disinfectants, cleaning agents, water, steam

Product description

UNISILKON L 200 is a special lubricating grease based on silicone oil ａnd PTFE. The product meets the legislative provisions of the German Health Authority governing the use of plastics ａnd drinking water (DVGW-KTW). It is also approved by WRC (Water Research Centre), Great Britain.

Benefits for your application

• Good sealing effect

• High thermal stability

• High resistance to many aqueous solutions

• Neutral towards many plastics ａnd elastomers, e.g. ABS, PC, EPDM, NBR

• Excellent resistance to cold ａnd hot water, water steam

• Certified acc. to DVGW-KTW ａnd WRC

Product description

Manufacturers ａnd operators in the wood, textile or paper industry have to lubricate rolling bearings subject to high temperatures.

We designed UNISILKON L 50/2 to meet these requirements.

UNISILKON L 50/2 is a high-temperature grease for rolling ａnd plain bearings based on silicone oil ａnd PTFE solid lubricants suitable for a wide service temperature range.

The long-term grease UNISILKON L 50/2 has a good wetting ability on metal surfaces ａnd offers good wear protection, resistance to ambient media ａnd thermal stability. You can extend relubrication intervals ａnd reduce cleaning ａnd maintenance costs, so UNISILKON L 50/2 can reduce your operating costs.

Benefits for your application

• Made of special raw materials to ensure long-term ａnd for-life lubrication at high temperatures

• Wear reduction for increased component availability due to its good pressure absorption capacity

• Versatile use due to good compatibility with aqueous solutions

Product description

UNIMOLY GB 2 is a high-temperature lubricating grease based on mineral oil, silicate ａnd molybdenum disulphide.

Benefits for your application

• For lubrication points subject to high loads

• Emergency running properties

• Good dampening effect

Product description

Benefits for your application

• High-performance grease containing MoS₂

• Good corrosion protection

• Ageing ａnd oxidation resistant

• Reduces wear

• Water resistant

Product description

Benefits for your application

• High-performance grease with MoS₂

• Reduces wear

• Good corrosion protection

• Resistant to ageing ａnd oxidation

• Good worked stability

Product description

Benefits for your application

• High load-carrying capacity

• Wear protection

Product description

Benefits for your application

• High load-carrying capacity

• Wear protection

Product description

Benefits for your application

• High load-carrying capacity

• Wear protection

Product description

UNISILKON GLK 112 ensures smooth running of components at low temperatures ａnd is at the same time resistant to high temperatures. It is based on silicone oil ａnd a special lithium soap. The product is compatible with many different elastomers (but not silicone rubber) ａnd plastics. Approval VW TL 767 X.

Benefits for your application

• Good low-temperature characteristics ａnd wide service temperature range

• Good compatibility with elastomers ａnd plastics

• Good wetting of functional surfaces

Product description

VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil ａnd mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion ａnd wear protection, resistance to water ａnd media as well as ageing ａnd oxidation stability.

Benefits for your application

• Savings in costs for bearings due to the good corrosion ａnd wear protection as well as pressure absorption capacity of the grease, therefore long service life ａnd maintenance intervals

• Reduced wastewater disposal costs due to good water resistance resulting in a long service life ａnd relubrication intervals

• Trouble-free operation of machines due to easy pumpability ａnd metering in central lubrication systems

Product description

ASONIC GLY 32 is a synthetic low-noise lubricating grease manu­factured in a clean environment.

The product components used ａnd the grease’s low base-oil viscosity yield a very high speed factor ａnd a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.

Benefits for your application

• Low-temperature rolling bearing grease

• Synthetic lubricant

• Low noise

• High purity

• Low frictional torque

Product description

The high performance ASONIC GHY 72 is due to its optimised mix of product components: ester oil, polyurea thickener, a special additive package, combined in a special ａnd clean manufacturing environment. This ensures the extraordinary features of ASONIC GHY 72 for use in rolling bearings:

• high purity

• low noise

• long shelf life

• high resistance to water

• good corrosion protection

Benefits for your application

• Wide service temperature range

• Long service life

• Synthetic lubricant

• Low noise

Product description

AMBLYGON TA 30/1 ａnd TA 30/2 are long-term ａnd high-temperature lubricating greases based on mineral oil ａnd polyurea.

These lubricating greases are used for long-term lifetime lubrication in the machine-building sector covering a wide service temperature range up to 160 °C. AMBLYGON TA 30/1 ａnd TA 30/2 offer good adhesion, resistance to hot water ａnd diluted alkaline ａnd acid solutions. AMBLYGON TA 30/1 ａnd TA 30/2 are resistant to oxidation ａnd ageing ａnd protect against corrosion.

Benefits for your application

• Good resistance to ambient media, water ａnd water steam

• Good corrosion protection

• Good adhesion

• Good sealing effect

• Suitable up to 160 °C