产品展示
优质供应
详细内容
Mobil SHC Gear Series ISO VG 150, 220, 320, 460 ａnd 680 are approved under General Electric’s (GE) gear oil specification D50E35 for use in off-highway vehicle motorized wheel gearbox applications.
Specifications ａnd Approvals
| Mobil SHC Gear meets or exceeds the following industry specifications | 150 | 220 | 320 | 460 | 680 | 1000 |
| Meets AGMA 9005-E02 | X | X | X | X | X | |
| Meets DIN 51517 Part 3 (CLP) | X | X | X | X | X | X |
| Meets ISO 12925-1 Type CKD | X | X | X | X | X | |
| Meets ISO 12925-1 Type CKT | X | X |
| Mobil SHC Gear has the following builder approvals | 150 | 220 | 320 | 460 | 680 | 1000 |
| SIEMENS AG Flender gear units, T 7300, Table A-c, Flender Code No. | A36 | A35 | A34 | A33 | A32 | A31 |
| SEW Eurodrive SEW IG CLP HC | 150 | 220 | 320 | 460 | 680 | 1000 |
| GE Motorized Wheel | D50E35 | D50E35 | D50E35 | D50E35 | D50E35 | D50E35 |
Typical Properties
| Mobil SHC Gear Series | 150 | 220 | 320 | 460 | 680 | 1000 |
| ISO Viscosity Grade | 150 | 220 | 320 | 460 | 680 | 1000 |
| Viscosity, ASTM D 445 | ||||||
| cSt @ 40ºC | 150 | 220 | 320 | 460 | 680 | 1000 |
| cSt @ 100ºC | 22.2 | 30.4 | 40.6 | 54.1 | 75.5 | 99.4 |
| Viscosity Index, ASTM D 2270 | 176 | 180 | 181 | 184 | 192 | 192 |
| Pour Point, ºC, ASTM D 97 | -45 | -39 | -33 | -27 | -27 | -24 |
| Flash Point, ºC, ASTM D 92 | 233 | 233 | 233 | 234 | 234 | 234 |
| Brookfield @ 0ºF (-18ºC), cP, ASTM D 2983 | 41000 | 96000 | ||||
| Brookfield @ -20ºF (-28ºC), cP, ASTM D 2983 | 18200 | 35000 | 57000 | 107000 | 156000 | 500000 |
| Density 60ºF (15,6ºC), g/ml | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.87 |
| Total Acid Number, mg KOH/g, ASTM D 664 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 |
| 4 Ball EP Test, kgf, ASTM D 2783 | ||||||
| Weld Load | 200 | 200 | 200 | 200 | 200 | 200 |
| Load Wear Index | 51 | 51 | 51 | 51 | 51 | 51 |
| FZG Micropitting, FVA Proc No. 54, 90°C | ||||||
| Fail Stage | 10 | 10 | 10 | 10 | 10 | 10 |
| GFT-Class | High | High | High | High | High | High |
| FZG Scuffing, ISO 14635-1 (mod) A/8.3/90, Fail Stage | 13 | 14 | 14 | 14 | 14 | 14 |
| FZG Scuffing, ISO 14635-1 (mod) A/16.6/90, Fail Stage | Not tested | >14 | >14 | >14 | >14 | >14 |
| Copper Corrosion, 3H @ 121°C, ASTM D 130 | 1B | 1B | 1B | 1B | 1B | 1B |
| Rust protection, ASTM D665, Sea Water | Pass | Pass | Pass | Pass | Pass | Pass |
| Demulsibility of EP Oils, Free Water, ml, ASTM D 2711 | 88 | 87 | 85 | 84 | 87 | |
| Water Separability, ASTM D 1401,Time to 40/37/3 at 82ºC, minutes | 10 | 10 | 10 | 15 | 25 | 40 |
| Foaming Characteristics, ASTM D 892,Seq. II, Tendency/Stability, ml/ml | 0/0 | 0/0 | 0/0 | 20/0 | 0/0 | 0/0 |
Health ａnd Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application ａnd the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS＇s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
