产品展示
优质供应
详细内容
FUCHS RENOLIN AW系列 详细信息:
RENOLIN AW
Zinc- ａnd Ash-Free HM Hydraulic Oils ａnd CKC Lubricating Oils
Zinc- ａnd Ash-Free HM Hydraulic Oils ａnd CKC Lubricating Oils
Zinc-free hydraulic oils have steadily gained popularity over the last few years.
In many cases, the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic fluids can contaminate metalworking fluids. RENOLIN ZAF B hydraulic oils are zinc- ａnd ash-free HM hydraulic oils complying with ISO 6743-4.
The most important features of RENOLIN ZAF B hydraulic oils are:
- Good oxidation stability ａnd good resistance to ageing
- Powerful EP properties ａnd very good wear protection
- Excellent corrosion protection
- Rapid air release ａnd low foaming
- Good demulsification characteristics
- Good compatibility with sealing materials
Application:
RENOLIN ZAF B products are high-grade HM hydraulic oils according to ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils according to ISO 6743
| RENOLIN AW |
| 32 | 46 | 68 |
|
| Hydraulic oil type |
|
|
|
|
|
| acc. to ISO 6743-4 |
| HM 32 | HM 46 | HM 68 |
|
| acc. to DIN 51 502 |
| HLP 32 | HLP 46 | HLP 68 |
|
| Lubricating oil type |
|
|
|
|
|
| acc. to ISO 6743-6 |
| CKC 32 | CKC 46 | CKC 68 |
|
| acc. to DIN 51 502 |
| CLP 32 | CLP 46 | CLP 68 |
|
| Characteristics | Unit |
|
|
| Test method |
| Colour |
| 1 | 1 | 1 | ASTM D 1500 |
| Kinematic viscosity |
|
|
|
|
|
| at | mm²/s | 31.5 | 45 | 65.4 | ASTM D 445 |
| at | mm²/s | 5.3 | 6.7 | 8.4 | ASTM D 445 |
| Viscosity index |
| 98 | 101 | 98 | ASTM D 2270 |
| Density at | kg/l | 0.878 | 0.878 | 0.885 | ASTM D 1298 |
| Flash point, Cleveland open cup | °C | 215 | 230 | 230 | ASTM D 92 |
| Pour point | °C | -30 | -27 | -21 | ASTM D 97 |
| Neutralization number | mg KOH/g | 0.3 | 0.3 | 0.3 | ASTM D 974 |
| Saponification number | mg KOH/g | 1.3 | 1.3 | 1.3 | ASTM D 94 |
| Water content | % mass | not traceable | not traceable | not traceable | ASTM D 95 |
| Insolubles | % mass | not traceable | not traceable | not traceable | DIN 51 592 |
| Demulsification | min | 10 | 10 | 15 | DIN 51 599 |
| Air release at | min | 3 | 8 | 7 | ASTM D 3427 |
| Foaming, |
|
|
|
|
|
| seq. I | ml | 30/0 | 50/0 | 50/0 | ASTM D 892 seq. I-III |
| seq. II | ml | 20/0 | 20/0 | 20/0 | ASTM D 892 seq. I-III |
| seq. III | ml | 20/0 | 20/0 | 20/0 | ASTM D 892 seq. I-III |
| Copper corrosion | degree of corr. | | | | ASTM D 130 |
| Rust prevention |
| pass A | pass A | pass A | ASTM D 665 |
| Ageing behaviour, increase in neutralization number after 1000 h | mg KOH/g | < 2 | < 2 | < 2 | ASTM D 943 |
| Brugger boundary friction test | N/mm² | 38 | DIN 51 347 (D) |
|
|
| FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | DIN 51 354-2 |
| Vickers vane pump test, loss of mass |
|
|
|
|
|
| on ring | mg | 120 | 120 | 120 | IP 281 |
| on vanes after 250 h | mg | 30 | 30 | 30 | IP 281 |
| Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at |
|
|
|
|
|
