Mobil ATF Type F

Mobil Type F ATF

Type F Automatic Transmission Fluid

Product Description

Mobil Type F ATF is an automatic transmission fluid which is made from high quality base oils with viscosity index improvers, antioxidants, anti-wear agents, defoamants ａnd special additives to provide the controlled frictional characteristics of a Type F fluid in automatic transmission applications.

 Applications

The frictional characteristics of an automatic transmission fluid are an important factor in the design ａnd operation of the transmission. All Ford transmissions built prior to 1977, ａnd certain models that continued in use during 1977-1980, were designed for a high-friction fluid that allowed the shifting clutches to lock up or engage quickly. Ford specification ESW-M2C33-F covers this type of product, which is commonly referred to as "Type F" fluid.

These vehicles are identified as:
           All 1976 ａnd earlier Ford, Lincoln, ａnd Mercury models of cars, vans, ａnd light trucks;
           All 1977-1980 models having either ESW-M2C33-F or no number at all stamped on the transmission dipstick

Mobil Type F ATF is recommended by ExxonMobil for use in applications requiring Type F fluid as follows:

• Automatic transmissions in certain older Toyota, Mazda, Volvo, ａnd other imported vehicles that require an ESW-M2C33-F fluid. In addition, this type of ATF is specified for some Ford power steering systems.

• For the makeup ａnd refill in power steering systems of the following Ford vehicles:
                 1980 ａnd older Lincoln, Continental, ａnd Mark; 
                 1978 ａnd older models of all other Ford cars, vans, ａnd light trucks

• For anti-wear requirements of Sperry Vickers industrial hydraulic systems where low wear in the ASTM D 2882 vane pump test is the principal criterion.

Mobil Type F ATF is not recommended for automatic transmissions in Ford, General Motors, Chrysler, American Motors, or any other cars requiring a Dexron-II, Dexron-IIE, Dexron-III or Mercon-approved fluid, or for those Ford products requiring an M2C 138CJ (Type CJ) fluid or an M2C 166H (Type H) fluid.

 Typical Properties