Mobil Turbo 319A-2

Synthetic Aircraft-Type Gas Turbine Lubricant

Description

Mobil Turbo 319A-2 is a fully synthetic lubricant developed to meet the performance requirements of Russian gas turbine aircraft engines which operate on mineral-oil-based lubricants. Formulated from a synthetic hydrocarbon combination of polyalphaolefin (PAO) ａnd hindered ester based stock, Mobil Turbo 319A-2 is fortified with a unique chemical additive system. The resulting product has far superior thermal ａnd oxidation stability than mineral-oil-based lubricants. The ability of Mobil Turbo 319A-2 to resist deterioration ａnd deposit formation allows the potential for extended oil drain intervals ａnd less frequent maintenance.

The closely controlled viscosity of Mobil Turbo 319A-2 at -51º C, along with a -60ºC pour point, ensure good low-temperature fluidity, permitting engine starting ａnd lubrication at low temperatures. Mobil Turbo 319A-2 exhibits excellent bulk oil stability at temperatures up to 200º C (392º F). The evaporation rate of Mobil Turbo 319A-2 at high temperatures is significantly lower than mineral-oil-based products, ａnd helps minimize oil consumption. The lubricant has excellent resistance to foaming.
Mobil Turbo 319A-2 is compatible with existing seal materials, including F Rubber (Viton A), H Rubber (Buna N), ａnd silicone, as well as 11 metals used in gas turbine construction.

Features ａnd Benefits

Mobil Turbo 319A-2 offers the following advantages ａnd benefits:

·                                 Low evaporation loss ａnd oil consumption

·                                 Reduced sludge ａnd carbon deposits

·                                 Improved bulk oil oxidation stability ａnd extended oil drain intervals

·                                 Compatible with existing seal materials

·                                 Reduced engine maintenance, including potential for extended drain intervals

Applications

Mobil Turbo 319A-2 is recommended for aircraft gas turbine engines that normally operate on mineral-oil-based lubricants, as well as engines approved to operate on oils meeting the specifications listed below.

Mobil Turbo 319A-2 is approved against the following specification of the Russian Central Institute of Aeronatutical Motors (CIAM):

·                                 IMP-10

·                                 MS, 8P, MS-8RK

·                                 36/1 Ku-A

·                                 VNII NP 50-1-4f ａnd -4u

·                                 B3V ａnd LZ-240

·                                 Mobil Turbo 319A-2 also meets U.S. Military Specification MIL-L-6081C, as well as the essential performance requirements of U.S. MIL-L-7808K, Grade 3.

Typical Characteristics