企业档案
- 会员类型：免费会员
- 工商认证： 【已认证】
- 最后认证时间：
- 法人：
- 注册号：
- 企业类型：生产商
- 注册资金：人民币300万
联系我们
联系人：张经理
热门标签
技术文章
TCGB-21型塑料薄膜和薄片测厚仪操作指南
点击次数：549 发布时间：2021/6/23 9:03:28
TCGB-21型塑料薄膜和薄片测厚仪操作指南,塑料薄膜和薄片测厚仪,土工布CBR顶破试验仪,糙面土工膜毛糙高度测定仪,土工布动态穿孔测定仪,钠基膨润土耐静水压测定仪
据技术部6月23日上午09点01分透露：(http://www.app17.com/c149978/products/d10769166.html)
二、TCGB-21型塑料薄膜和薄片测厚仪产品参数：
三、TCGB-21型塑料薄膜和薄片测厚仪使用方法：
据技术部6月23日上午09点01分透露：(http://www.app17.com/c149978/products/d10769166.html)
YI、TCGB-21型塑料薄膜和薄片测厚仪简介：
TCGB-21型塑料薄膜和薄片测厚仪适用于塑料薄膜、薄片的厚度测试，还可适用于纸张、纸板的厚度测试、箔片、硅片、金属片的厚度测试、纺织材料的厚度测试、固体电绝缘体的厚度测试。
TCGB-21 Thickness Gauge for Plastic Film ａnd Thin Sheet
TCGB-21 type plastic film ａnd thin sheet thickness tester is suitable for plastic film, thin sheet thickness test, but also suitable for paper, cardboard thickness test, foil, silicon, metal sheet thickness test, textile material thickness test, solid electrical insulation thickness test.
二、TCGB-21型塑料薄膜和薄片测厚仪产品参数：
1、分度值0.001mm 量程0-12mm
2、上下测量面为凸/平面时，上测量面的曲率半径在15-50（mm）时，其测量面对试样施加的负荷为0.1N到0.5N之间。
3、测量精度
（1）100um以内 精度1um
（2）100um到250um 精度2um
（3）250um以上 精度3um
4、外形尺寸：160x140x200mm
5、重量：1.5kg
TCGB-21 Thickness Gauge for Plastic Film ａnd Thin Sheet
1, the indexing value 0.001mm range 0-12mm
2. When the upper ａnd lower measuring surface is convex/flat, the radius of curvature of the upper measuring surface is 15-50 (mm), ａnd the load applied to the sample on the measuring face is between 0.1N ａnd 0.5N.
3. Measurement accuracy
(1) Accuracy within 100um is 1um
(2) 100um to 250um accuracy 2um
(3) above 250um precision 3um
4. Overall dimension: 160x140x200mm
5. Weight: 1.5kg
三、TCGB-21型塑料薄膜和薄片测厚仪使用方法：
1、测试先把千分表清零，并拨动操纵杆试几次回零后，再进行测试。操作时轻抬轻放以免损坏测足及仪表。
2、用手指按下操纵杆使测足上抬，将被测物置于工作台、测足之间。轻放操纵杆，此时表的读数即被测物的厚度，
3、使用完毕后将仪器装入盒内并置于干燥处防止受潮。
TCGB-21 type plastic film ａnd thin sheet thickness gauge method of use:
1. Before the test, the dial meter is cleared to zero, ａnd the joystick is moved several times to try to return to zero, ａnd then the test is carried out. Lift ａnd place gently during operation to avoid damage to the gauge ａnd instrument.
2. Press the joystick with your finger to lift the measured foot, ａnd place the measured object between the workbench ａnd the measured foot. Gently place the joystick ａnd the meter will read the thickness of the object being measured.
3. After use, put the instrument into a box ａnd place it in a dry place to prevent moisture.
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy ａnd hydropower coarse-grained soil series, asphalt testing instrument
原创作者：河北天辰仪器设备有限公司
