企业档案
- 会员类型：免费会员
- 工商认证： 【已认证】
- 最后认证时间：
- 法人：
- 注册号：
- 企业类型：生产商
- 注册资金：人民币300万
联系我们
联系人：张经理
热门标签
技术文章
塑料薄膜和薄片测厚仪异常现象及处理
点击次数：408 发布时间：2021/5/7 8:51:05
塑料薄膜和薄片测厚仪异常现象及处理,塑料薄膜和薄片测厚仪,土工布厚度仪,数显土工膜厚度测定仪,土工布CBR顶破试验仪,土工布动态穿孔测定仪,电动数显土工合成材料厚度仪
据技术部5月7日上午08点51分透露：（http://www.app17.com/c149981/products/d10694547.html）
二、TCJT-25型塑料薄膜和薄片测厚仪产品参数：
三、TCJT-25型塑料薄膜和薄片测厚仪使用方法：
据技术部5月7日上午08点51分透露：（http://www.app17.com/c149981/products/d10694547.html）
YI、TCJT-25型塑料薄膜和薄片测厚仪简介：
TCJT-25型塑料薄膜和薄片测厚仪适用于塑料薄膜、薄片的厚度测试，还可适用于纸张、纸板的厚度测试、箔片、硅片、金属片的厚度测试、纺织材料的厚度测试、固体电绝缘体的厚度测试。
Brief introduction of tcjt-25 thickness gauge for plastic film ａnd sheet:
Tcjt-25 thickness gauge for plastic film ａnd sheet is suitable for thickness test of plastic film ａnd sheet, paper ａnd paperboard, foil, silicon ａnd metal, textile materials ａnd solid electrical insulator.
二、TCJT-25型塑料薄膜和薄片测厚仪产品参数：
1、分度值0.001mm 量程0-12mm
2、上下测量面为凸/平面时，上测量面的曲率半径在15-50（mm）时，其测量面对试样施加的负荷为0.1N到0.5N之间。
3、测量精度
（1）100um以内 精度1um
（2）100um到250um 精度2um
（3）250um以上 精度3um
4、外形尺寸：160x140x200mm
5、重量：1.5kg
Product parameters of tcjt-25 thickness gauge for plastic film ａnd sheet:
1. Division value 0.001mm, range 0-12mm
2. When the upper ａnd lower measuring surfaces are convex / plane ａnd the curvature radius of the upper measuring surface is 15-50 (mm), the load applied on the measuring surface is between 0.1N ａnd 0.5N.
3. Measurement accuracy
(1) Within 100um, the precision is 1um
(2) 100um to 250um accuracy 2um
(3) The precision is above 250um ａnd 3um
4. Overall dimension: 160x140x200mm
5. Weight: 1.5kg
三、TCJT-25型塑料薄膜和薄片测厚仪使用方法：
1、测试先把千分表清零，并拨动操纵杆试几次回零后，再进行测试。操作时轻抬轻放以免损坏测足及仪表。
2、用手指按下操纵杆使测足上抬，将被测物置于工作台、测足之间。轻放操纵杆，此时表的读数即被测物的厚度，
3、使用完毕后将仪器装入盒内并置于干燥处防止受潮。
Use method of tcjt-25 thickness gauge for plastic film ａnd sheet:
1. Before the test, clear the dial indicator ａnd move the control lever to zero several times before the test. During operation, lift ａnd place gently to avoid damaging the foot ａnd instrument.
2. Press the control lever with your fingers to lift the foot, ａnd place the object between the workbench ａnd the foot. Place the control lever gently, ａnd the reading of the meter is the thickness of the object to be measured,
3. After use, put the instrument into a box ａnd put it in a dry place to prevent moisture.
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy ａnd hydropower coarse-grained soil series, asphalt testing instrument
原创作者：河北天辰仪器设备有限公司
