产品简介

KLUBERSYNTH UH1 64-2403一直是发达国家的食品加工和制药行业。它符合德国食品法规符合要求载于“指引秒21CFR 

178.3570 FDA的规定。“由美国农业部已注册资格作为一个H1的润滑剂。KLUBERSYNTH UH1 64-2403耐冷热水，消毒

液，清洗剂和蒸汽。在正确应用时，它不损害或泡沫的形成品味啤酒。认可的测试饮料配药实验室水龙头证实，所有要求在

胶密封脂安装会见。

KLUBERSYNTH UH1 64-2403是一个适合啤酒的专用润滑脂水龙头，每桶灌装装置，过滤器，填料箱，橡胶隔膜和密封。

可能是KLUBERSYNTH UH1 64-2403应用刷子，抹刀或油脂枪，或仅仅是它挤压出管。

KLUBERSYNTH UH1 64-2403不适合填补三元乙丙水龙头密封（乙烯-丙烯-二烯橡胶）。在这种情况下，使用

PARALIQGTE的第703次。

保质期：的货架寿命是约24个月，如果该产品是存储在原在干燥密闭容器中审查。

图片信息

Klüber Klübersynth UH1 64-2403

Klüber Klübersynth UH1 64-2403 Is a synthetic sealing grease for the food-processing ａnd pharmaceutical industries

Benefits for your application

– Facilitates the reliable operation of beverage dispensing installations owing to its neutrality towards taste ａnd beer froth
– Offers very good resistance to hot ａnd cold water ａnd steam, extending maintenance intervals
– ISO 21469 certified – supports the compliance with the hygienic requirements in your production.
– Certified acc. to international standards, e.g. UBA (DVGW-KTW), WRAS, NSF Standard 61, NSF H1,Halal (HFCE) ａnd DIN EN 377 Class B

Description

Klübersynth UH1 64-2403 has been especially developed for the food-processing ａnd pharmaceutical industries. Klübersynth UH1 64-2403 is resistant to hot ａnd cold water ａnd does not impair the formation of froth or the taste of beer. Klübersynth UH1 64-2403 is NSF H1 registered ａnd therefore complies with FDA 21 CFR § 178.3570. In addition this grease is Halal certified (HFCE) ａnd related drinking water certificates such as UBA (DVGW-KTW), WRAS ａnd NSF Standard 61 are available. Klübersynth UH1 64-2403 has been tested ａnd approved in accordance with DIN EN 377 Class B (lubricants for gas units ａnd actuators, operating temperature range 0 to 90 °C). Klübersynth UH1 64-2403 was developed for incidental contact with products ａnd packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 64-2403 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Application

Klübersynth UH1 64-2403 is a special grease suitable for beer taps, barrel filling installations, filters, stuffing boxes, rubber diaphragms ａnd seals.

Application notes

Klübersynth UH1 64-2403 may be applied by brush, spatula or grease gun, or simply by squeezing it out of the tube.

Note:

Klübersynth UH1 64-2403 is normally compatible with most elastomer types, however we recommend the use of PARALIQ GTE 703 for filling taps with EPDM seals (ethylenepropylene-diene rubber).

Looking for any other product in Kluber Lubrication or other Lubricant ? Just give us a call.