当前位置: 易推广 > 物理仪器 > 环境试验箱 > 湿热试验箱 > 诺古科技(上海)有限公司 > 产品展示 > 德国Liebisch > K3000M-TR冷凝水试验箱 > 德国Liebisch 进口冷凝水腐蚀试验箱
德国Liebisch 进口冷凝水腐蚀试验箱
企业档案
会员类型:初级版会员
已获得易推广信誉 等级评定
(0 -40)基础信誉积累,可浏览访问
(41-90)良好信誉积累,可接洽商谈
(91+ )优质信誉积累,可持续信赖
易推广初级版会员:3年
最后认证时间:
注册号: 【已认证】
法人代表: 【已认证】
企业类型:代理商 【已认证】
注册资金:人民币1000万 【已认证】
产品数:146
参观次数:108467
德国bareiss
- 德国bareiss 油封国际橡胶硬度计
- 德国bareiss 密封圈国际橡胶硬度计
- 德国bareissO型圈国际橡胶硬度计
- 德国bareiss IRHD VLRH国际橡胶硬度计
- 德国bareiss IRHD L国际橡胶硬度计
- 德国bareiss IRHD H国际橡胶硬度计
- 德国bareiss IRHD M国际橡胶硬度计
- 德国bareiss Micro Shore A 测量装置
- 德国bareiss 测量探针
- 德国bareiss BSA5000 自动支架
- 德国bareiss BSA1000 自动支架
- 德国bareiss BS61 II 支架
- 德国bareiss 邵氏硬度计弹簧力控制装置
- 德国bareiss 邵氏校正圈
- 德国bareiss shoreD校正标块
- 德国bareiss shore A校正标块
- 德国bareiss IRHD校正标块
- 德国bareiss Centrofix 杂件定位器
- 德国bareiss Sealfix 油封定位器
- 德国bareiss Centrofix IX 顆粒定位器
- 德国bareiss Centrofix III 线材定位器
- 德国bareiss Centrofix II 钳子定位器
- 德国bareiss Centrofix V 胶囊定位器
- 德国bareiss Centrofix IV 管材定位器
- 德国bareiss Barofix III 自动O型圈定位器
- 德国bareiss Barofix L 手动O型圈定位器
- 德国bareiss Barofix 手动O型圈定位器
- 德国bareiss RPA Ultra 旋转闭腔式橡胶加工分析仪
- 德国bareiss BR460M 落球回弹仪
- 德国bareiss BR500M 落球回弹仪
- 德国bareiss HDA 325 全自动硬度密度测试器
- 德国bareiss HDA 150 全自动硬度密度测试器
- 德国bareiss digiRebound 全自动高温橡胶回弹仪
- 德国bareiss digiRebound 全自动橡胶回弹仪
- 德国bareiss digiChamber B高低温橡胶硬度计
- 德国bareiss digiChamber R高低温橡胶硬度计
- 德国bareiss 3106 球压痕及洛氏硬度测试计
- 德国bareiss BaRotation IV 视觉与硬度测试仪
- 德国bareiss BaRotation 全自动弹性体硬度测试计
- 德国bareiss HPE II Pusey & Jones 赵氏数显硬度计
- 德国bareiss HPE II Barcol 巴氏数显硬度计
- 德国bareiss HPE II KFZ 汽车内饰数显硬度计
- 德国bareiss HPE III L 方向盘数显硬度计
- 德国bareissABM II DIN磨耗测仪
- 德国bareiss IRHD COMPACT III 国际橡胶硬度计
- 德国bareiss Gelomat 胶囊硬度测试计
- 德国bareissHPE II Fff 数显水果硬度计
- 德国bareiss邵氏数显硬度计
- 德国bareiss HP 邵氏硬度计
- 德国bareiss汽车方向盘硬度计
- 德国bareiss全自动邵氏硬度计
- 德国bareiss全自动橡胶硬度计
德国maag
- 德国maag RPG1000 植绒可筛性测试仪
- 德国maag SPG1000 植绒升时间测试仪
- 德国maag DMB 15植绒导电率仪
- 德国maag电动拉出式试验机
- 德国maag APG1004摩擦磨损试验机
- 德国maagAPG1003摩擦磨损试验机
- 德国maag APG1000摩擦磨损试验机
德国HELD
德国ziegler
日本DUMBBELL
- 气动冲裁制样机
- DUMBBELL CO., LTD-SDK-500 Spare blade 刀片
- 日本DUMBBELLSDL-100裁样机
- 日本DUMBBELLSDL-200裁样机
- 日本DUMBBELLSSK-1000长方形裁切刀
- 日本DUMBBELLSDMBK-1000直角裁切刀
- 日本DUMBBELLSDMAK-1000新月裁切刀
- 日本DUMBBELLSDK-500哑铃裁切刀
- 日本DUMBBELLSDK-300哑铃裁切刀
德国ID
- 飞机涂层冲击试验机
- 汽车喷嘴耐久性能试验机
- 空调管路渗透试验箱
- CO2气密爆破试验机
- 尿素加注试验机
- 尿素管路压力脉冲试验机
- 脚踏板耐久性能试验机
- 座椅靠背调节器间隙试验机
- 雨刮条性能试验机
- 汽车单向阀性能试验机
- 3D运动装置
- CO2气密性试验机
- 正负压气密性试验机
- 超高低温涡轮增压管脉冲试验机
- PVT涡轮增压管脉冲试验机
- 涡轮增压管脉冲试验机
- CO2空调管路脉冲试验机
- 空调管路油压脉冲试验机
- 油压脉冲试验装置
- 空调管路脉冲试验机
- 汽车轮胎爆破试验机
- 多功能爆破试验机
- 爆破试验机
- 汽车膨胀水箱性能试验机
- 冷热冲击试验机
- 膨胀水箱性能试验机
- 冷却液循环试验机
- 汽车水泵冷热冲击试验机
- 汽车水泵性能试验机
- 电缆弯曲和螺旋耐久试验机
- 商用车冷却液脉冲压力发生装置
- 电池冷板脉冲试验机
- PVT冷却水管脉冲试验机
- 冷却水管脉冲试验机
- 多功能碎石冲击试验机
德国Schraer
德国Erichsen
德国Steinhauser
德国 SCHUETZ MESSTECHNIK
德国Liebisch
德国CAE
美国TABER
德国WALTER
德国DUSTEC
德国 Amtec
德国WOLF
详细内容
型号 K 3000 M-TR
Operating systems: condensation water (K) 功能:冷凝水(K)
To carry out automatic PID controlled individual in accordance with national and international standards and procedures such as:
可以通过 PID 控制分别进行国家和标准的试验程序,例如
DIN EN ISO 6270-2(formerly DIN 50017 )
⚫ Particularly energy-saving, heat-insulated compact chest-type design Housing and testing chamber made of high-quality glass-fibre reinforced polyester resin on fully laminated steel frame with castors and adjustable feet
特制的节能、隔热紧凑型箱体设计,内置加强钢架的高品质玻璃纤维复合材料,标配脚轮
和可调节地脚螺钉;
⚫ Double-wall energy-saving testing chamber cover (particularly torsion-resistant and providing insulation)
双层节能箱盖设计 (特制防扭力、隔热 )
⚫ Easy handling due to double gas strut support and ergonomically formed handle 方便的双气压支撑杆,人体工学设计把手;
⚫ Testing chamber volume approx. 3000 litre 试验容积大约 3000 升;
⚫ Testing chamber seals made of foam silicone profiles 硅树脂发泡密封
⚫ Sample depot made of fully non-corrosive and deflection-resistant glass-fibre reinforced plastic round tubes
全防腐、防变形玻璃纤维加强型圆杆样品架;
⚫ Automatic refill system for deionized water to supply operating water for condensation test.(Required flow pressure of deionized water: 0,5 - 1 bar)
冷凝水试验去离子水自动上水系统 ( 需要去离子水压:0,5 - 1 bar )
⚫ Large-surface heating on the outer down sides of the testing chamber protected against corrosion for constant heating
箱体外下部的大加热面积设计,防止长时间加热状态的腐蚀;
⚫ Electronic micro-processor controlled temperature control (PID) of testing chamber 试验 PID 温度控制
⚫ LED-Display resolution of set and actual value 0,1°C. Temperature constancy <± 0,5 K. LED 显示设定和实际温度分辨率 0,1°C,温度波动小于±0,5 K;
The chest is supplied fully equipped and ready for connection. The standard delivery scope includes: 3 m mist drainage hose d 50, 3 m safety overflow hose d 50, 2 m condensate drainage hose d 20
设备附件齐全,易于现场安装。标准配置包括:3m 长 d50 喷雾排气管,3m 长 d50 溢流水管,2m 长 d32 排水管。
德国Liebisch K3000M-TR 冷凝水腐蚀试验箱主要参数:
Type 类型 | K 3000 M-TR |
Housing 箱体 | GRP |
Weight 重量 | appr. 800 kg |
Cabinet dimensions (b x d x h) 箱体尺寸 | 3925x 1350 x 1520 mm |
Inside dimensions (b x d x h) 内部尺寸 | 2865 x 1020 x 1200 |
Max. loading testing chamber (possibly on bored basic plate / option)底板承重 | 200 kg |
Operating voltage / Frequency 工作电压/频率 | AC 400 V +6/-10% 50/ 60 Hz |
Connected load K 功率 | 3.500 W |
Control range test room K 温度控制范围 | up to 50°C |
Fuse 保险 | 12A |
Temperature control 温度控制 | el. PID |
Overtemperature protection for test room 过温保护 | yes |
Volumen test chamber 试验容积 | 3000 litre |
Pressure requirement of external demin. water supply 外部去离子水压 | 0,5 - 1,0 bar |
Water filling housing bottom 底部水容积 | 28 litre |
Exhaust-air hose (diameter) 排气孔直径 | d 50 mm (hose) * |
Condensate draining hose (diameter) 冷凝水排水孔直径 | d 32 mm (hose) * |
Safety overflow hose (diameter) 溢水孔直径 | d 50 mm (hose) * |
Technical changes possible. 保留技术改动权利 * hose is included in delivery 水管标配
热门标签:进口冷凝水试验箱 Liebisch试验箱 冷凝水腐蚀试验箱