香港奥德赛创科技有限公司产品主要有安规检测类产品、环境类试验箱、万能试验机、疲劳试验机、燃烧阻燃类试验设备各类检测仪器，并代理了美国ED&D、日本KYOKUTOU极东、日本极东、日本志贺、日本爱模、日本TEAC、日本LINIAX、日本日本NMB、日本NoiseKen、美国MONROE、美国ELECTRO-LITE、以色列ophir、德国WAZAU、德国PTL、德国PTI、OPHIR等知名品牌检测仪器。
    深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。欢迎各界朋友莅临参观、指导和业务洽谈。请联系销售总监：苏曼

产品描述: FN7110是一款双量程的高精度力传感器。两个量程之间的标准比率为1比10，标准量程从0-2 和 0-20 lb 到 0-200 和 0-2000 lb。FN7110两个量程的精度相同，均为 0.1% F.S。在测量过程中，一旦达到小量程传感元件的满量程极限，机械限位会保护其不受过载损坏，大量程的过载能力为1.2倍（相当于小量程的12倍）。可选放大输出。作为拥有多年经验的传感器设计和制造商，MEAS常常与客户合作，按要求定制适合特殊用途和测试环境的传感器。同时，我们也根据客户需要提供成套系统。配套元件（传感器，电源，放大器和数显系统）配置统一，经过校正，可供客户立即使用。

特点:

• 双量程：从10/100 到 1 kN/10 kN [2/20 到 200/2 klbf]
• 拉力和压力测量
• 可定制其他量程
• 精度：0.1% F.S.
• 内置机械限位
• 可选放大输出 
• • The FN7110 features high accuracy measurement channels in two ranges in the same load cell. The standard ratio between the ranges is 1 to 10, ａnd standard load range combinations go from 0-10 ａnd 0-100 N through 0-1000 ａnd 0-10,000 N. The FN7110＇s percentage accuracy is the same over each range in the load cell. In practice one maintains accuracy of 0.1% over the high force range even in the first 10% of F.S.
  • During measurement, once the lower range sensing element reaches its designed full scale limit, mechanical stops protect it against overloads, in tension ａnd compression, up to 12 times the full scale limit of the higher range sensing element (which is equivalent to 12 times the full scale limit of the lower range). For high-level output, a model with an integrated amplifier is available.
  • With many years of experience as a designer ａnd manufacturer of sensors, Measurement Specialties, Inc. often works with customers to design or customize sensors for specific uses ａnd testing environments. To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier ａnd digital display) are formatted, calibrated ａnd ready for immediate use.
• • • Double Full Scale Range
    • • Process Control Equipment
    • • Tension ａnd Compression - Other ranges on request
    • • Robotics ａnd Effectors
    • • Accuracy : 0.1% F.S.
    • • Product Validation Testing
    • • Integrated Mechanical Stops
    • • Laboratory ａnd Research
    • • High Level Output Model with Integrated Amplifier
  • • • F.S. Ranges in N
      • 10/100
      • 50/500
      • 100/1k
      • 200/2k
      • 500/5k
      • 1k/10k
      • F.S. Ranges in lbf
      • 2/20
      • 10/100
      • 20/200
      • 40/400
      • 100/1k
      • 200/2k
        • All values are typical at temperature 20 ±1° C
        • PARAMETERS
        • Operating Temperature Range [OTR]
        • -20 to 80° C [-4 to 176° F]
        • Compensated Temperature Range [CTR]
        • 0 to 60° C [32 to 140° F]
        • Zero Shift in CTR
        • <0.5% F.S. / 50º C [/100° F]
        • Sensitivity Shift in CTR
        • <1% of reading / 50º C [/100° F]
        • Range [F.S.]
        • 0-10/0-100 N to 0-1/0-10 kN [0-2/0-20 to 0-200/0-2000 lbf]
        • Over-Range
        • Without Damage
        • 1.2 x F.S. of the higher range
        • Accuracy
        • Linearity
        • ±0.1% F.S. of each range