该温度传感器可像标准温度传感器一样测量激光功率和单次脉冲能量，但此外还可测量激光束的位置和激光粒度。 测量激光束的位置精度为0.1mm，测量一个高斯光束激光粒度的精度为+/-5％。 激光位置传感器可向激光位置控制器提供反馈，激光位置对于激光对准是很重要的。

香港奥德赛创科技有限公司产品主要有安规检测类产品、环境类试验箱、万能试验机、疲劳试验机、燃烧阻燃类试验设备各类检测仪器，并代理了美国ED&D、日本KYOKUTOU极东、日本极东、日本志贺、日本爱模、日本TEAC、日本LINIAX、日本日本NMB、日本NoiseKen、美国MONROE、美国ELECTRO-LITE、以色列ophir、德国WAZAU、德国PTL、德国PTI、OPHIR等知名品牌检测仪器。

深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。欢迎各界朋友莅临参观、指导和业务洽谈。请联系销售总监：苏曼

以色列OPhir温度传感器，激光功率计性能特点：

以色列OPhir温度传感器，激光功率计的规格书：

1.1.3.2 Low Power BeamTrack-Power / Position / Size Sensors

100μW to 10W

Features

 ? All the features of standard power sensors plus...

 ? Accurate tracking of beam position to 

 fractions of a mm

 ? Monitoring of the laser beam size

3A-QUAD / 3A-P-QUAD 

3A-QUAD / 3A-P-QUAD 

10A-PPS

10A-PPS

Model 3A-QUAD (a) 3A-P-QUAD (a) 10A-PPS (a)

Use General purpose Short pulses Low power

Functions Power / Energy / Position Power / Energy / Position Power / Energy / Position / Size

Absorber Type Broadband P type Broadband

Spectral Range μm 0.19 - 20 0.15 - 8 0.19 - 20

Aperture mm ?9.5mm ?12mm ?16mm

Power Mode

Power Range 100μW - 3W 160μW - 3W 20mW - 10W

Power Scales 3W to 300μW 3W to 300μW 10W / 5W / 0.5W

Power Noise Level 5μW 10μW 1mW

Thermal Drift (30min)% 10 - 40μW (b) 10 - 40 μW (b) NA

Maximum Average Power Density kW/cm2 1 0.05 28

Response Time with Meter (0-95%) typ. s 1.8 2.5 0.8

Power Accuracy +/-% (f ) 3 3 3

Linearity with Power +/-% 1 1 1

Energy Mode

Energy Range 20μJ - 2J 30μJ - 2J 6mJ - 2J

Energy Scales 2J to 200μJ 2J to 200μJ 2J / 200mJ

Minimum Energy 20μJ 30μJ 6mJ

Maximum Energy Density J/cm2

<100ns 0.3 1(e) 0.3

0.5ms 1 1(e) 2

2ms 2 1(e) 2

10ms 4 1(e) 2

Beam Tracking Mode

Position

Beam Position Accuracy mm (c) 0.15 0.15 0.15

Beam Position Resolution mm 0.02 0.02 0.02

Min Power for Position Measurement 300μW 400μW 50mW

Size (d)

Size Accuracy mm NA NA ±(5%+50μm) for centered beam

Size Range mm (4σ beam diameter) NA NA 1.5 - 10

Min Power for Size Measurement NA NA 50mW

Cooling convection convection convection 

Weight kg 0.3 0.3 0.3

Fiber Adapter Available (see page 63) ST, FC, SMA, SC ST, FC, SMA, SC ST, FC, SMA, SC

Part number 7Z07934 7Z07935 7Z07904

Notes: (a) The BeamTrack features are supported by StarBright, StarLite, Nova II ａnd Vega meters, Juno interface ａnd StarLab application.

Notes: (b) Depending on room airflow ａnd temperature variations.

Notes: (c) For position within inner 30% of aperture. 

Notes: (d) Assumes laser beam with Gaussian (TEM00) distribution. For other modes, size measurement is relative. 

Notes: (e) For P type ａnd shorter wavelengths derate maximum energy density as follows: Wavelength Derate to value

1064nm not derated

532nm not derated

355nm 40% of stated value 

266nm 10% of stated value

193nm 10% of stated value

Notes: (f ) The 3A-QUAD has a relatively large spectral variation in absorption ａnd has a calibrated spectral curve at all wavelengths in its spectral range to the above specified accuracy. 

Nova, Orion ａnd LaserStar meters do not support this feature ａnd when used with those meters, the accuracy will be ±3% as above for 532nm, 905nm, 1064nm ａnd 10.6μm but there will 

be an additional error of up to 3% at other wavelengths in the spectral range 190 – 3000nm.