测量范围1 - 3000米/分钟

参考300±15毫米的距离

300±30毫米1)

2)4线性±0.05%)

3)4)重复性±0.03%

分辨率0.1 mm / 0.001 m/min

更新时间(至少平均时间)0.5 ms
 

Model ASCOspeed 5500

Measuring range 1-3000 m/min

Reference distance 300 ±15mm

300 ±30mm 1)

Linearity ± 0.05% 2) 4)

Repeatability ± 0.03% 3) 4)

Resolution 0.1mm / 0.001 m/min

Update-time (least averaging-time) 0.5ms

Light source Power-LED (safety class 1)

Signal conditioning compact housing with integral electronics

Protection class IP65 (suitable for cold-rolling-mill application by using the stainless steel

protective housing with air-purging ａnd viton-seams)

Vibration (DIN EN 60068-2-6) 2g / 20 … 500Hz, sinoidal

Shock (DIN EN 60068-2-29) 15g / 6ms, half sinoidal

Operating temperature 0°C to 50°C (without external cooling)

Storage temperature -20°C to 70°C

Output

Standard: 2 encoder outputs (A, B, /A, /B), 3 alarm, 3 status

Optional: 2 further encoder outputs (A, B, /A, /B),

synchronisation output; analogue output (4 - 20mA)

All outputs opto-insulated

Digital Data-Interfaces

Standard: 1x RS232 (Service or parameterization interface)

Optional: 1x RS232, 1x RS232 o. RS422 (switchable)

Optional: EtherCAT-ready (compatible with Beckhoff EL6021/KL6041)

All serial interfaces are optically isolated

Input

Standard: Direction- ａnd trigger inputs

Optional: 3 further control- or pulse inputs

All inputs optically coupled with current delimiter resistors

LED 1. Signal (LED green/red) 2. Busy (yellow) 3. Error (red)

Power supply 24VDC ± 15% / P < 50W

Weight 5.6kg

1) Extended measuring distance with restricted measurement uncertainty of 0.1%

2) Deviation of the sensor characteristic for speed respectively length from a straight line, bigger than 15 m/s extended area with 0,1 %

3) Statistical probability 2 sigma, distribution measured at 5 m/s

4) Testing condition: metal surfac

光源功率led(安全等级1)

采用整体电子器件的信号调节紧凑型外壳

防护等级IP65(适用于使用不锈钢冷轧机的应用)

带有空气净化和玻璃接缝的防护外壳

振动(DIN EN 60068-2-6)2 g / 20…500 hz,sinoidal

休克(DIN EN 60068-2- 29)15g / 6ms，半正弦

操作温度0°C到50°C(没有外部冷却)

储存温度为-20°C到70°C

输出

标准:2个编码器输出(A,B，/ A，/ B)，3个报警，3个状态

可选:2进一步编码器输出(A,B，/ A，/ B)，

同步输出;模拟输出(4 - 20mA)

所有输出opto-insulated

数字数据接口

标准:1x RS232(服务或参数化接口)

可选:1x RS232,1x RS232 o. RS422(可切换)

可选:ethercatready(兼容Beckhoff EL6021/KL6041)

所有串行接口都是光学隔离的

输入

标准:方向和触发输入

可选:3进一步控制或脉冲输入

所有输入与电流定界电阻耦合

领导1。信号(LED绿色/红色)2。忙(黄色)3。错误(红色)

电源24 vdc / P < 50 w±15%

体重5.6公斤

1)延长测量距离，测量不确定度为0.1%

2)传感器特性与直线距离的偏差，大于15m / s扩展面积为0，为1%

3)统计概率2西格玛，分布以5米/秒测量

4)检测条件:金属表面