美VWR水浴锅摇床Barnstead/Lab-Line Max^Q* 7000 Benchtop Water Bath Shakers, Thermo Scientific

台式水浴摇床是理想的，需要个温度控制浴结合轨道振动的应用。振动筛的特点个易于访问的排水系统，快速断开，位于箱体前在排水和消毒系统方便。在室双挡板减少飞溅和湍流即使在高速度。理想的溶解度的研究，提取程序，细胞培养，般混合，杂交，细菌悬液，诊断测试，染色，脱色，洗涤程序。三偏心驱动可连续24小时运行，处理重的负荷，并提供完整的或不平衡负载平滑均匀搅拌即使在高速度。监控和PID温度控制器，控制槽液温度。视觉，用户可调超温安全信号温控器提供了额外的备份，通过控制热如果主控制器失败。振动特征的粉末涂层，冷轧钢外，和个无缝不锈钢内圆角。个强大的，ABS外壳包围和保护聚酯控制面板Ideal for applications that require a controlled temperature bath combined with orbital shaking motion. Shakers feature an easy access drain system with quick disconnect, located in the front of the cabinet for convenience in draining ａnd disinfecting the system. Twin baffles in the chamber minimize splashing ａnd turbulence even at high speeds. Ideal for solubility studies, extraction procedures, cell cultures, general mixing, hybridization, bacterial suspensions, diagnostic tests, staining, destaining, ａnd washing procedures. Triple eccentric drive enables continuous 24-hour operation, handles heavier loads, ａnd provides smooth uniform agitation of full or unbalanced loads even at high speeds. Monitor ａnd control bath temperature with PID temperature controller. Visual, user-adjustable overtemperature safety signal with independent thermostat provides additional backup by controlling the heat if the main controller fails. Shakers feature a powder-coated, cold-rolled steel exterior, ａnd a seamless stainless steel interior with rounded corners. A strong, ABS housing surrounds ａnd protects the polyester control panel.
 

Analog units feature variable speed controlled by a rotary dial, a DC motor, ａnd an LED digital display of temperature. An integrated tachometer monitors ａnd displays speed in rpm to guarantee accurate setting, ａnd the timer allows for continuous operation or timed shaking from 1–60 minutes.
Digital units feature variable speed control, adjustable with up/down arrows, ａnd a solid-state, brushless DC motor. Separate LED displays for temperature, speed, ａnd operating time. Speed is adjustable in 1rpm increments. Shaker shutdown ａnd audible ａnd visual signals indicate speed deviations ±10% of setpoint, ａnd temperature deviations of ±1°C of setpoint. Timer allows for continuous operation or timed shaking from 0.1–999 minutes, or from 0.1–999 hours. Soft-start feature helps prevent sudden starts ａnd stops to eliminate splashing of vessel contents ａnd wetting of flask closure. Setpoint retention retains parameters during power failure ａnd restarts unit automatically after power is restored. RS-232 interface allows remote monitoring of temperature, speed, ａnd time. For monitoring temperature, the built-in recorder jack allows output to a chart recorder for a permanent record.
The cooling coil accessory allows the bath to reach near-ambient temperature ａnd below. Gable covers prevent heat loss ａnd minimize evaporation. The stainless steel gable cover is for use in operations where temperatures reach up to 90°C （194°F）. The Plexiglas® gable cover is for use in operations where temperatures reach up to 65°C （149°F）. The four auxiliary platform suspension arms allow for rapid platform changing. The movable dolly allows for under lab bench operation.
Ordering Information: Five-year manufacturer’s warranty on parts; one-year manufacturer＇s warranty on labor; ａnd lifetime manufacturer’s warranty on drive mechanism. For universal platforms, see the 57018-990 series. For clamps, see the 97007-248 series. For tube racks, see the 80080-554 series.
UL ａnd C-UL listed. CE marked.

Exterior Dimensions	54.6W x 63.5L x 45.7H cm （211/2 x 25 x 18"）
Interior Dimensions	35.6W x 40.6L x 20.3H cm （14 x 16 x 8"）
Load Capacity	15.9 kg （35 lbs.）
Temperature Accuracy	±0.2°C at 37°C in flask
Temperature Range	5° above ambient to 65°C （149°F）