当前位置: 易推广 > 物理仪器 > 表面物性测试 > 密度分析仪 > 北京冠测精电仪器设备有限公司 > 产品展示 > 粉末密度测试仪 > 表面活性剂表观密度仪 > 表面活性剂表观密度测试仪粉状洗涤剂
表面活性剂表观密度测试仪粉状洗涤剂
企业档案
会员类型:会员
已获得易推广信誉 等级评定
(0 -40)基础信誉积累,可浏览访问
(41-90)良好信誉积累,可接洽商谈
(91+ )优质信誉积累,可持续信赖
易推广会员:12年
最后认证时间:
注册号:**** 【已认证】
法人代表: 【已认证】
企业类型:个体商户 【已认证】
注册资金:人民币万 【已认证】
产品数:2704
参观次数:1988917
电压击穿试验仪
电性能检测仪器
- 电弱点测试仪5KV
- 耐电弧试验仪-NDH-B
- 绝缘子漏电起痕NLD-AII
- 全自动高压漏电起痕试-NLD-AI
- 电线耐干湿电弧试验机-YHT-RC100
- 大电流起弧试验仪-NDH-AI
- 大电流温升试验机-DW-100
- GCSTD-AB高频介电常数
- GCSTD-CII工频介电常数
- GCSTD-D高低频介电常数
- GCSTD-FI介电常数
- GCSTD-F液体介电常数测试仪
- GCWP-A介电温谱测试系统
- GDW-250高低温试验台
- GDW-500全自动恒温试验台
- NLD-C电线电缆耐漏电起痕试验仪
- NLD-BI耐电痕化指数
- 电弱点在线检测试验系统
- GCSKS-50水扩散试验装置
- 电弱点测试仪1300
- 电弱点测试仪1000
- 电弱点测试仪650
- 导体,半导体电阻率测试仪
- 电压击穿试验机
电阻率测试仪
- GEST-121体积表面电阻率测试仪
- GEST-121A-全自动绝缘电阻率测试仪
- GEST-121B全自动电阻率测试仪
- GEST-121A1-热刺激电流测量仪
- GEST-122-多功能炭素材料电阻率测试仪
- GEST-122A-石墨材料电阻率测试仪
- GEST-123T-液态金属电导率测定仪
- GEST-126-全自动粉末电阻率测试仪
- GEST-210-全自动炭块电阻率测试仪
- GEST-20042-炭纸双板电阻率测定仪
- GEST-126T-粉尘层电阻率测试仪
- FTDZ-I-粉末电阻率测试仪
- FTDZS-I-粉末电阻率测试仪(四探针法)
- 高低温绝缘电阻率测量系统
- (两探针法) GCFTDZ-I粉末电阻率测定仪
- 121C点对点对地电阻测试仪
- GEST-121T高温电阻率测试仪
- GCYP-5464油介质损耗及电阻率
海绵泡沫检测仪器
- PMPL-2000A-海绵往复冲击疲劳试验机
- PMLQ-500-全自动落球回弹试验仪
- PMYX-2000A-海绵泡沫压陷硬度试验机
- PMTQ-A-海绵空气透气率测定仪
- PMQS-I-泡沫起升仪
- YSRB-300-硬质泡沫压缩蠕变试验机
- -PMLS-1000海绵泡沫拉伸撕裂强度试验机
- GCPQ - 100海绵切割机
- 海绵拉伸撕裂强度试验机
- YSBX-1海绵压缩长久变形试验机
- GCPMMD-A海绵泡沫密度测定装置
- PMFY-A慢回弹泡沫复原时间测定仪
- CLC-C海绵泡沫缓冲能量
比表面孔径分析仪
橡胶塑料检测仪器
力学性能检测仪器
- CLC-AI-落锤冲击试验机
- 5KN微机控制电子万能试验机
- 100KN电子万能试验机
- GCWDS-20KN微机控制电子万能试验机
- CLC-AII汽车胶粘剂冲击
- 防腐涂层冲击试验机
- 组合式摆锤式冲击试验机
- GCCBC摆锤式冲击试验机
摩擦磨损检测试验机
材料热物理性能实验设备
- GCTKP-碳材料膨胀系数测试仪
- ZKEY-I-炭块CO₂反应测定仪
- ZKTT-I-炭块空气透过率测试仪
- GCTKK-700-铝用炭块空气反应性测定仪
- ZKDZY-I-颠转仪
- GEST-1600炭素高温热态电阻
- GCRPZ-1000热膨胀系数测试仪
粉末流动性测试仪
粉末密度测试仪
- 全自动真密度测试仪
- 振实密度测试仪 ZS703
- 粉末压实密度测试仪
- 颗粒图像分析仪
- 压实密度粉末电阻率仪
- 表面活性剂表观密度仪
- 塑料表观密度测试仪
- 自由流动堆积密度测定仪
- 粉末自然堆积密度仪
- 超硬磨料堆积密度测定仪
- 粉体真密度测试仪
- 白土堆积密度测定仪
- 陶粒砂体积密度测定仪
- 普通磨料堆积密度仪
- 休止角测定仪
- 氧化铝流动时间测定仪
- 塑料流动性测试仪
- 氧化铝流动角测定仪
燃烧性能性试验机
电池检测
导体、半导体电阻率
详细内容
ZK-13173表面活性剂表观密度仪
ZK-13173 Surfactant Apparent Density Meter
粉状洗涤剂 表面活性剂表观密度测试仪,体积称量法密度仪
Powder detergent surfactant apparent density tester
GB 13173 ISO1064 Apparent Density Tester
标准:
GB/T 13173-2009 ISO1064:1974
standard: GB/T 13173-2009 ISO1064: 1974
原理:
在规定条件下,将试样从一个具有规定形状的漏斗中漏下,装满一个已知容积的受容器后,测定此粉体的质量。
principle: Under specified conditions, the sample is leaked from a funnel with a specified shape, and after filling a receiving container with a known volume, the quality of the powder is measured.
概述:
适用于自由流动的粉体,当使用合适的漏斗时,也适用于有结块趋势的粉体.若粉体中带有团块,则只有当这团块易于松散,且有不致使粉体的颗粒破碎的情况下,本设备才是适用的
Overview:
It is suitable for free-flowing powders. When using a suitable funnel, it is also suitable for powders with a tendency to agglomerate. If there are clumps in the powder, only if the clumps are easy to loosen and do not cause the powder This equipment is suitable when the particles are broken
粉体的表观密度可用占有一定体积的粉体质量,或一定质量粉体所占的体积来评价。在这两种形式中,都包括把分内铜原容器转移到测量容器这一过程。由于产品易碎,其流动性或结块性,其粒子的几何形状的变化,加之测定时,由于倾注至测量容器而造成的不可避免的压缩,硬质一般所测得的表观不同于产品在原容器或包装中的密度.所以,测定的结果仅是一个与所用方法有关的惯用值.
The apparent density of powder can be evaluated by the mass of powder occupying a certain volume, or the volume occupied by a certain mass of powder. In both forms, the process of transferring the original copper container to the measuring container is included. Due to the fragility of the product, its fluidity or agglomeration, the change in the geometric shape of its particles, and the inevitable compression caused by pouring into the measuring container during the measurement, the appearance of the hardness is generally different from that of the product. The density in the original container or packaging. Therefore, the measured result is only a customary value related to the method used.
技术要求:
1、整体个漏斗材料为不锈钢制作,确保粉体所接触的表面是光滑的,且不允许产生静电
2、测定自由流动粉体时,漏斗下口径40mm,上口径108mm,高度130mm
3、测定有结块趋势的粉体时, 漏斗下口径60mm,上口径112mm,高度100mm
4、受料器容积:500ML±0.5ML,取样量:510-550ML
5、支架,能使漏斗和受料器对应定位
6、漏斗出口自带截止板/挡板,方便放置粉末
skills requirement:
1. The overall material of the funnel is made of stainless steel to ensure that the surface contacted by the powder is smooth and does not allow static electricity.
2. When measuring free-flowing powder, the lower diameter of the funnel is 40mm, the upper diameter is 108mm, and the height is 130mm.
3. When measuring powders with a tendency to agglomerate, the lower diameter of the funnel is 60mm, the upper diameter is 112mm, and the height is 100mm.
4. Volume of receiver: 500ML±0.5ML, sampling volume: 510-550ML
5. The bracket can position the funnel and the receiver correspondingly
6. The exit of the funnel comes with a cut-off plate/baffle for easy powder placement
测试步骤:
1. 将漏斗放到支架上面,称量过的容器放在下地板的位置。
2. 用截止板遮住漏斗的下口,将试样倒入漏斗,直至其上边缘,然后迅速移去截止板,让漏斗中的粉末随即流入收料器并完全溢出
3. 用不锈钢尺子沿着受料器的上口边缘,小心地粉体刮平,然后去称重m2.天平精度到0.01g
4. 根据计算公式密度=(M2-M1)/V算出粉体的表观密度
Test steps:
1. Place the funnel on the support, and place the weighed container on the lower floor.
2. Cover the lower opening of the funnel with a shut-off plate, pour the sample into the funnel until its upper edge, and then quickly remove the shut-off plate, let the powder in the funnel immediately flow into the receiver and overflow completely
3. Use a stainless steel ruler along the edge of the upper mouth of the receiver, carefully scrape the powder, and then weigh the m2. The accuracy of the balance is 0.01g
4. Calculate the apparent density of the powder according to the calculation formula density=(M2-M1)/V
热门标签:表面活性剂表观密度测试仪粉状洗涤剂