北京华测高压漏电起痕试验仪

一、华测高压漏电起痕试验仪产品简介：
        高压漏电试验仪采用西门子控制系统精度更高，摈弃了现有的低压切断原原理，采用独有的高压真空切断技术，使试验过程更加合理。采用5组电流传感器用以控制每组试验的高压切断，使数据采集更加jing确，同时本设备采用电力系统过压过流保护装置，使仪器更加安全。


二、华测高压漏电起痕试验仪满足标准：
    高压漏电起痕试验机适用于对电工电子产品、家用电器及其材料进行耐电痕化和蚀损的试验，模拟在工频（48Hz - 62Hz）下，用液体污染物和斜面试样，通过耐电痕化和蚀损的测量评定在严酷环境条件下使用的电气绝缘材料的耐电痕化和蚀损等。本机是严格按照GB/T6553-2003 及 IEC60587-1984设计制造。

三、华测高压漏电起痕试验仪参数规格：
1、电：厚0.5mm 材质：不锈钢；
2、上下电距离：50.0mm±0.1；
3、试验电压：100V-6000V；
4、调压器：输出：0～250V可以调，容量5KVA；
5、试验变压器：容量5KVA，zui高输出电压AC6000V（或DC6000V可选）；
6、稳压器：输出AC220V 功率6000W，精度±1%；
7、回路电流为60mA时，切断电压输出；
8、试验时间：6小时；
9、滴液精度：0.5%；
10、电压稳定度：±1%；
11、起痕判断：
    依标准GB/T6553-2003/4.1.2规定，在试样上施加电压（2.5k V,3. 5k V和4.5k V），并以一定流速滴污染液，在60mA以下的电流持续6H不过流即为通过。
12、滴液装置：
    采用雷弗精密蠕动泵，流量范围0.00185 ～20毫升/分钟，工作转速0.1～50转/分钟，流量精度误差：＜0.5%；（根据试验电压自动控制）
13、输出电压：交流/直流（可切换）
14、实验组数：五组 15、控制装置：采用西门子PLC+台湾威纶触摸屏控制，控制精密，操作简单，设计人性化，试验结束自动生成报告，面板热敏打印机可以适时打印试验结果； 15、工作室体积：900L*650W*950H(mm)；容积为0.56m3。
15、污液槽采用316不锈钢，加装密闭装置。

客户好评
要客户有：清华大学； 西门子避雷器（无锡）有限公司； 北方避雷器有限公司； 大唐铁路工程有限公司 ；日本精工株式会社NSK中国研究院




Measured HCLD- type high pressure tracking t machine
Thank you for choosing Beijing Hua measurement t instrument! As one of our customers is our great honor. The company not only to provide you with excellent quality products, but also will provide you with satisfactory service!
Beijing Hua measurement t instrument for the Chinese Academy of Sciences under the Beijing branch of micro nano Limited by Share Ltd subsidiary, the company currently has 16 overseas students, engaged in research ａnd development of new materials ting instruments, sensors ａnd networking control technology of high-tech enterprises Venture Park students registered in Beijing Zhongguancun science park. Technical team including national people plan, 973 of the country＇s chief scientist, winners of national outstanding youth fund, the Ministry of education Changjiang Scholar Professor, Chinese Academy of Sciences "Hundred Talents Program" ａnd the 26 doctor. The company production ａnd sales of new materials ting equipment, in order to "touched by the user, the perception of China" as its mission, the networking company in new materials ting equipment, the core technology industry to become the leading global solutions provider. Active around the needs of customers, through the detection of continuous improvement to provide quality information ｕpdate service, ａnd strive to become customers in new materials detection technology ａnd networking services leader
The main customers t instrument for the detection of materials: Tsinghua University
Siemens arrer (Wuxi) Co., Ltd.
The lightning arrer Co.
Datang Railway Engineering Company Limited
Seiko NSK China Research Institute
A, product overview:
China t model tracking high voltage ter is one of the key research Huace products company in 2013, SIEMENS control system with higher precision using the high pressure leakage t instrument, instead of the existing low voltage cut off the high voltage vacuum principle, unique cutting technology, the t process is more reasonable. The 5 group of current sensor with high accuracy cutting pressure to control each t, the data acquisition is more accurate, but the equipment used in power system overvoltage ａnd overcurrent protection device, make the instrument more secure.
Two, meet the standard:
High pressure leakage t for electric ａnd electronic products, household appliances ａnd materials resistance to tracking ａnd erosion t machine for mark, simulations in the frequency (48Hz - 62Hz), using liquid pollutants ａnd beveled sample, the resistance to tracking ａnd erosion of level measurement ａnd resistance to tracking ａnd erosion assessment electrical in harsh environmental conditions of the insulating material. This machine is designed ａnd manufactured in strict accordance with the GB/T6553-2003 ａnd IEC60587-1984.
Three, technical indicators
1, thick electrode: 0.5mm material: stainless steel;
2, the upper ａnd lower electrode distance: 50.0mm + 0.1;
3, the t voltage: 100V-6000V;
4, the regulator output: 0 ~ 250V, capacity 5KVA;
5, transformer capacity: 5KVA, the high output voltage of AC6000V (or DC6000V optional);
6, high-precision voltage regulator output power: AC220V 6000W, the accuracy of plus or minus 1%;
7, the loop current is 60mA, the output voltage is cut off;
8, the t time: 6 hours;
9, accuracy ｄrops: 0.5%;
10, voltage stability: + 1%;
11, the mark to judge:
In accordance with the provisions of the standard GB/T6553-2003/4.1.2, the voltage applied to the specimen (2.5k V, 3 5K V ａnd 4.5K V), ａnd to a certain velocity ｄrops below 60mA in the current contamination, but continued to flow is through 6H.
12, ｄropping device:
With Rafer precision peristaltic pump, flow range from 0.00185 to 20 ml / min, the working speed of 0.1 ~ 50 R / min, the flow accuracy error: < 0.5%; (automatic control according to the t voltage)
13, the output voltage: AC / DC (switchable)
14, the experimental group: five, control group 15: the Siemens device PLC+ Taiwan weinview touch screen control, control precision, simple operation, the design of humanity, the end of the experiment, automatic report generation, thermal printer can print the results in panel t; 15, the studio volume: 900L*650W*950H (mm); the volume is 0.56m3.
15, sewage tank adopts 316 stainless steel, with sealing device.