产品展示
优质供应
详细内容
使用温度范围 Category Temperture Range | -40 ~ +105℃ | ||||||
额定工作电压范围 Rated Voltage Range | 200 ~ 450V | ||||||
电容量允许偏差 Capacitance Tolerance | ±20% (M) (at 20℃,120Hz) | ||||||
漏电流 Leakage Current | I ≦3√CV after 5 minutes. 5分钟读数(20℃) Where ,I:Max.leakage current (uA),C:Nominal capacitance('uF) ,V:Rated voltage( V) | ||||||
损耗角正切值tanδ Dissipation Factor | 200~250Vdc : 0.15 max. (0.20 max. for ΦD=35mm) 400~450Vdc : 0.15 m (at 20℃,120Hz) | ||||||
低温特性 Low Temperature Characteristics (Max.Impedance Ratio) | 电容器120HZ下的阻抗比值下不应超过下表所列出的值
(at 120Hz) | ||||||
ESL | 50nH max. (at 20℃, 1MHz) | ||||||
耐久性 Endurence | 105℃施加额定工作电压2000小时,经恢复后 The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied for 2000 hours at 105℃.
| ||||||
高温储存特性 Shelf Life | 105℃放置1000小时,经恢复后 The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1000 hours at 105℃ without voltage applied.
|
■ 外形图 DIMENSIONS[mm]
●Standard Terminal Type: (Φ22 ~ Φ35)
■ 纹波电流补正系数 RATED RIPPLE CURRENT MULTIPLIERS
● 频率系数 Frequency Multipliers
Frequency (Hz) | 50 | 120 | 300 | 1k | 10k | 50K~ |
200 ~ 450V | 0.76 | 1.00 | 1.15 | 1.31 | 1.42 | ~1.45 |
■ 尺寸与纹波电流一览表 STANDARD RATINGS
| 200V Snap-in 牛角 | | 400V Snap-in 牛角 | ||
规格uF | 尺寸 | 规格uF | 尺寸 | ||
220uF | 22*25/30 | 100 | 22*30 *25/30 | ||
330 | 22*30 | 120 | 22*30 25*30 | ||
470 | 22*35/40 | 150 | 22*40 25*35 | ||
560 | 22*40/45 | 180 | 22*40 25*35/40 | ||
680 | 22*45 25*40 | 220 | 25*40/45 30*30 | ||
820 | 22*45/50 25*45 30*35/40 | 270 | 25*50/30*35/40 | ||
1000 | 22*50/50 25*50 30*40/45 | 330 | 30*40 30*50 35*35 | ||
1200 | 30*45/50 35*40 | 470 | 35*40/45/50 | ||
1500 | 35*50 | 560 | 35*45/50 | ||
1800 | 35*50 | 680 | 35*50 | ||
2200 | 35*50/60 | 820 | 35*60/70 | ||
| | 1000 | 35*60/70 | ||
| 250V Snap-in 牛角 | | 450V Snap-in 牛角 | ||
规格uF | 尺寸 | 规格uF | 尺寸 | ||
220uF | 22*30/35 | 47 | 22*30 | ||
330 | 25*30 | 68 | 22*30 | ||
470 | 25*40 | 82 | 25*30 | ||
560 | 25*40 | 100 | 25*30/35 | ||
680 | 30*40 | 120 | 25*35/40 22*40 | ||
820 | 30*45/30*50 | 150 | 25*35/40 | ||
1000 | 30*45/50/35*40/45/50 | 180 | 25*35/40/45/50 30*35/40 | ||
1200 | 30*45/50 35*40/50 | 220 | 22*45/50 25*40/45/50 30*40 | ||
1500 | 35*50/60 | 270 | 25*50/30*35/40 | ||
1800 | 35*50/60 | 330 | 30*40 30*50 35*40 35*35 | ||
2200 | 35*60/70 | 470 | 35*40/45/50 | ||
| | 560 | 35*45/50 | ||
| | 680 | 35*50/60 | ||
| | 820 | 35*60/70 | ||
| | 1000 | 35*60/70 | ||
规格uF | 400V Screw 螺丝 | 450V Screw 螺丝 | |||
尺寸 | 尺寸 | ||||
1000 | 35*80 | 35*80 | |||
2200 | 50*105 64*105/110 | 64*80/105/110 | |||
3300 | 64*105/130 | 64*105/130 | |||
4700 | 76*130/145 | 76*130/145 | |||
5600 | 76*145/150 | 76*145/150 | |||
6800 | 76*145/155 | 76*145/155 | |||
8200 | 76*220 | 76*220 | |||
10000 | 76*220 | 76*220 |
◆ DC OVERVOLTAGE TEST CON DI TIONS
The vent will operate and the capacitor shall be come an open circuit without burning materials
when the following test DC voltage is applied
Test DC voltage
Rated Voltage | Nominal Capacitance | Current Limit | Test Voltage |
200Vdc | <330 4A | 4A | 330/375Vdc |
330uF≤C<470uF 5A | 5A | ||
≥470uF | 7A | ||
250Vdc | <330 | 4A | 350/450Vdc |
330uF≤C<470uF 5A | 5A | ||
≥470uF | 7A | ||
400Vdc | <100 | 2A | 500/600Vdc |
100uF≤C<220uF | 4A | ||
≥220uF | 7A | ||
450Vdc | <100 | 2A | 550/675Vdc |
100uF≤C<220uF | 4A | ||
≥220uF | 7A |
● Test Circuit