煤样在氧气流中燃烧，生成水与五氧化二磷反应生成偏**后，经电解生成氢、氧和五氧化二磷。根据电解所消耗的电量，计算煤中氢的含量；形成****用吸收剂吸收，由吸收剂质量的增加，计算煤中碳的含量。煤样中硫氧化物和氯用****热解产物吸收，氮氧化物用粒状二氧化锰吸收，以消除其对测定的干扰，从这一原理要求应做好以下几方面工作。

How it works
      A coal sample is burned in an oxygen stream, where it forms water that reacts with the tetraphosphorus decaoxide to form a lump，Hydrogen, oxygen ａnd tetraphosphorus decaoxide are formed by electrolysis. The amount of electricity consumed by electrolysis，Calculate the hydrogen content of the coal; form the hydrogen ａnd absorb it with an absorbent，The content of carbon in coal is calculated by the increase of the mass of absorbent。Sulfur oxides ａnd chlorine in coal samples are absorbed by pyrolysis products，The nitrogen oxide is absorbed by a granular manganese dioxide to eliminate interference in the determination，From this principle should be required to do the following aspects of work。

 

性能特点：

1、结构紧凑、操作方便，能同时测定两个试样。

2、结果准确，操作简单，自动化程度高，体积小，重量轻等特点，是实验室较理想的测氢仪器。

参数：

序号项目性能

1炉体第*节炉第*节炉第*节炉

炉长245mm325mm150mm

温度800℃800℃600℃

功率1200W1500W800W

2反应管不锈钢Φ24mm×2mm×1200mm

3电源电压AC220V

4外形尺寸1200mm×320mm×580mm

5重量60Kg