产品展示
优质供应
详细内容
西门子CPU417-4订货号：6AG1417-4XT05-4AB0
The CPU 417-4 is the most powerful SIMATIC S7-400 CPU. The integral Profibus DP interfaces permit direct connection to the PROFIBUS DP fieldbus as ｍaster or slave.
Two further DP ｍaster systems CAN be connected via the IF 964-DP interface submodules.
Note:
Only the interface module 6ES7 964-2AA04-0AB0 can be used.
The CPU 417-4 has:
- Powerful processor:
The CPU achieves instruction execution times as low as 0.018 µs per binary instruction. - 30 MB RAM （of which 15 MB each for program ａnd data）;
fast RAM for parts of the user program relevant to execution. - Flexible expansion:
Up to 262144 digital ａnd 16384 analog inputs/outputs. - Multi-point interface MPI:
With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPU can establish up to 44 connections to stations of the communications bus （C bus） ａnd the MPI.
Note:
If the PROFIBUS DP interface ａnd MPI interface are operated simultaneously, it is only possible to connect the following bus connector to the MPI interface:- With socket: 6ES7 972-0BB41-0XA0
- Without socket: 6ES7 972-0BA41-0XA0
- Mode selector switch:
Designed as toggle switch. - Diagnostics buffer:
The last 120 fault ａnd interrupt events are retained in a ring buffer for diagnostic purposes （extendable）. - Real-time clock:
The date ａnd time are appended to diagnostic messages of the CPU. - Memory card:
For expansion of the integrated load memory. The information in the load memory comprises S7-400 parameterization data in addition to the program ａnd therefore requires twice as much memory space. The result is:- The integral load memory is not sufficient for large programs, therefore a memory card is frequently required.
RAM ａnd FEPROM cards （FEPROM for retentive storage） are available
- The integral load memory is not sufficient for large programs, therefore a memory card is frequently required.
- PROFIBUS DP interface:
The PROFIBUS DP ｍaster interface allows a distributed automation configuration offering high speed ａnd ease of use. From the user＇s point of view, the distributed I/O is treated as central I/O （same configuring, addressing, ａnd programming）.
Mixed configuration: SIMATIC S5 with SIMATIC S7 as PROFIBUS ｍaster to EN 50170.
Note:
If the PROFIBUS DP ａnd MPI interface are operated simultaneously, it is only possible to connect the following bus connectors to the MPI interface:- With socket: 6ES7 972-0BB41-0XA0
- Without socket: 6ES7 972-0BA41-0XA0
- Two additional slots:
Two additional PROFIBUS DP ｍaster systems can be connected via IF 964-DP interface modules.
西门子CPU417-4功能：
- Block protection:
a password concept also protects the user program from unauthorized access - Integrated HMI services:
The user only has to specify the source ａnd destination of the data with HMI devices. The data are then transported cyclically ａnd automatically by the system. - Integrated communication functions:
- PG/OP communication
- Global data communication
- S7 standard communication
- S7 communication
Configurable Attributes
The STEP 7 tool "Hardware configuration" can be used to program the properties ａnd response of the S7-400 including the CPUs, e.g.
- Multipoint interface MPI:
- Definition of node addresses
- Startup/cycle behavior
- Stipulation of the maximum cycle time ａnd communication load
- Address allocation:
Addressing of I/O modules - Retentive area:
Definition of the number of retentive bit memories, counters, timers, data blocks, ａnd clock memories - Size of the process image, local data
- Length of the diagnostics buffer
- Protection level:
Definition of access authorizations to program ａnd data - System diagnostics:
Definition of the handling ａnd scope of diagnostics messages - Timed interrupts:
Setting of periods - Configuring
Reporting functions
- Status ａnd fault indicators:
LEDs indicate internal ａnd external faults ａnd operating modes such RUN, STOP, restart, test function, etc. - Test functions:
The PG can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps ａnd inhibit program components. - Information functions:
The PG can be used to provide the user with information about the memory capacity ａnd operating mode of the CPU, ａnd the current utilization of the working ａnd load memories.
西门子CPU417-4技术规范：
|
| 6ES7 417-4XT05-0AB0 |
| 产品状态 |
|
| 固件型号 | V5.0 |
| 相关的编程软件包 | STEP 7 V5.3 SP2 或更高，带硬件更新 |
| 将外部缓冲电压送至 CPU | 5 － 15 VDC |
| 电流消耗 |
|
| 从背板总线DC 5 V ， | 1.8 A |
| 电流消耗/功耗 |
|
| 功耗， | 6 W |
| 后备电池 |
|
| 电池选件 |
|
| 225 µA；在 40°C 温度下有效 |
| 750 µA |
| 存储器 |
|
| RAM |
|
| 15 兆字节 |
| 15 兆字节 |
| x |
| 装载存储器 |
|
| √ |
| 64 兆字节 |
| 1 兆字节 |
| √ |
| 64 兆字节 |
| 后备 |
|
| √ |
| √ |
| x |
| CPU/程序块 |
|
| DB |
|
| 16 000；编号范围：1 至 16,000 |
| 64 KB |
| FB |
|
| 8 000；编号范围：0 至 7999 |
| 64 KB |
| FC |
|
| 8 000；编号范围：0 至 7999 |
| 64 KB |
| OB |
|
| 64 KB |
| 嵌套深度 |
|
| 24 |
| 2 |
| CPU/处理时间 |
|
| 位操作，*小 | 18 ns |
| 字操作，*小 | 18 ns |
| 定点数运算，*小 | 18 ns |
| 浮点数运算，*小 | 54 ns |
|
| |
| S7 计数器 |
|
| 2 048 |
|
|
| √ |
| 0 |
| 2 047 |
| Z 0 至 Z 7 |
|
|
| 0 |
| 999 |
| IEC 计数器 |
|
| √ |
| SFB |
| S7 定时器 |
|
| 2 048 |
|
|
| √ |
| 0 |
| 2 047 |
| 无保持定时器 |
|
|
| 10 ms |
| 9,990 s |
| IEC 定时器 |
|
| √ |
| SFB |
| 数据区及其保持性 |
|
| 可记忆的数据范围，总共 | 总工作存储器和装入存储器（带有备用电池） |
| 标志 |
|
| 16 KB |
| √ |
| 8; （1个存储字节） |
| 地址区 |
|
| I/O 地址区 |
|
| 16 KB |
| 16 KB |
|
|
| 2 KB |
| 2 KB |
| 8 KB |
| 8 KB |
| 过程映像 |
|
| 16 KB |
| 16 KB |
| 1,024 字节 |
| 1,024 字节 |
| 244 字节 |
| √ |
| 子过程映像 |
|
| 15 |
| 数字量通道 |
|
| 131 072 |
| 131 072 |
| 131 072 |
| 131 072 |
| 模拟量通道 |
|
| 8 192 |
| 8 192 |
| 8 192 |
| 8 192 |
| 硬件配置 |
|
| 可连接的 OP | 63 |
| 中央设备， | 1 |
| 扩展设备， | 21 |
| 多CPU运行 | √；*多 4 个 CPU（带 UR1 或 UR2） |
| IM |
|
| 6 |
| 6 |
| 4; IM 463-2 |
| DP主站的数量 |
|
| 2 |
| 4 |
| 10；CP 443-5 扩展 |
| ×；IM 467 不能与 CP 443-5 Extended 一起使用；IM 467 不能与 PN IO 下的 CP 443-1 EX40 一起使用 |
| 2 |
| 6 |
| IO 控制器数量 |
|
| 4；通过 PN 模式下的 CP 443-1 EX 41；中央控制中*多为 4 个 |
| 可运行的 FM 和 CP 数量（推荐） |
|
| 受插槽数和接口数的限制 |
| 受插槽数和接口数的限制 |
| 14；其中*多 10 个 CP 或 IM 作为 DP 主站和 PN 控制器 |
| 时间 |
|
| 时钟 |
|
| √ |
| √ |
| 1 ms |
| 运行小时计数器 |
|
| 8 |
| 时间同步 |
|
| √ |
| √ |
| √ |
| √ |
| √ |
| √ |
| √ |
| 通过 CP |
| √ |
| S7 报文功能 |
|
| 报文功能可以登录站的数量，*多 | 63；*多 63 个带有 ALARM_S 和 ALARM_D （OP）；*多 16 个带有 ALARM_8 和 ALARM_P（如 WinCC） |
| 与符号相关的报文 | √ |
| 报文数量 |
|
| 1 024 |
| 与块相关的报文 | √ |
| 8 个报警功能块 | √ |
| 指令和控制报文 | √ |
| 调试功能 |
|
| 状态/控制 |
|
| √ |
| 强制 |
|
| √ |
| 状态块 | √ |
| 单步运行 | √ |
| 断点数量 | 4 |
| 诊断缓冲区 |
|
| √ |
| 3 200 |
| √ |
| 120 |
| 通讯功能 |
|
| 编程器/OP 通讯 | √ |
| 路由 | √ |
| 全局数据通讯 |
|
| √ |
| 54 字节 |
| S7 基本通讯 |
|
| √ |
| 76 字节 |
| S7 通讯 |
|
| √ |
| 64 KB |
| S5可兼容通讯 |
|
| √；（通过*多 10 个 CP 以及 FC AG_SEND 和 FC AG_RECV） |
| 8 KB |
| 标准通讯（FMS） |
|
| √；通过 CP 和可调用的 FB |
| Web 服务器 |
|
| 不；通过CP |
| 通过 CP 443-1 Adv 和可调用的 FB |
| 1452 |
| 连接数量 |
|
| 64 |
| 第1接口 |
|
| 物理 | RS 485 / PROFIBUS |
| 隔离 | √ |
| 功能性 |
|
| √ |
| √ |
| √ |
| MPI |
|
| 44 |
|
|
| √ |
| √ |
| √ |
| √ |
| √ |
| 12 Mbit/s |
| DP主站 |
|
| 32 |
|
|
| √ |
| √ |
| x |
| √ |
| √ |
| √ |
| √ |
| √ |
| 12 Mbit/s |
| 32 |
|
|
| 2 KB |
| 2 KB |
|
|
| 244 字节 |
| 244 字节 |
| DP从站 |
|
| 32 |
|
|
| √ |
| √ |
| 12 Mbit/s |
|
|
| 244 字节 |
| 244 字节 |
| 32 |
| 32 字节 |
| 32 字节 |
| 第2接口 |
|
| 物理 | RS 485 / PROFIBUS |
| 隔离 | √ |
| 功能性 |
|
| √ |
| √ |
| DP主站 |
|
| 32 |
|
|
| √ |
| √ |
| √ |
| √ |
| √ |
| √ |
| √ |
| 12 Mbit/s |
| 125 |
|
|
| 8 KB |
| 8 KB |
|
|
| 244 字节 |
| 244 字节 |
| DP从站 |
|
| 32 |
|
|
| √ |
| √ |
| http://support.automation.siemens.com/WW/view/de/113652 |
| 12 Mbit/s |
|
|
| 244 字节 |
| 244 字节 |
| 32 |
| 32 字节 |
| 32 字节 |
| 第 3 接口 |
|
| 接口类型 | 插入式接口模块 （IF），技术规格与第 2 个接口相同 |
| 可插入接口模板 | IF 964-DP （MLFB:6ES7964-2AA04-0AB0） |
| 第 4 接口 |
|
| 接口类型 | 插入式接口模块 （IF），技术规格与第 2 个接口相同 |
| 可插入接口模板 | IF 964-DP （MLFB:6ES7964-2AA04-0AB0） |
| 等时模式 |
|
| 每个等时从站可用数据， | 244 字节 |
| 等距离 | √ |
| *短时钟脉冲 | 1ms；不使用 SFC 126、127 时 0.5ms |
| 在 RUN 模式下 CiR 组态 |
|
| CiR 同步时间，基本负载 | 100 ms |
| CiR 同步时间,每个 I/O 从站的时间 | 40 µs |
| CPU/编程 |
|
|
| |
| √ |
| 编程语言 |
|
| √ |
| √ |
| √ |
| √ |
| √ |
| √ |
| √ |
| 嵌套级 | 7 |
| 用户程序保护/密码保护 | √ |
| 尺寸 |
|
| 所需插槽 | 2 |
| 尺寸和重量 |
|
| 尺寸和重量 |
|
| 50 mm |
| 290 mm |
| 219 mm |
| 重量 |
|
| 920 g |
邮箱: 95015363@qq.com
SIEMENS 可编程控制器
1、 SIMATIC S7 系列PLC、S7-200、S7-200Smart、s7-1200、S7-300、S7-400、ET200
2、逻辑控制模块 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
3、 SITOP 系列直流电源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A
SIEMENS 交、直流传动装置
4、交流变频器 MICROMASTER系列：MM、MM420、MM430、MM440、ECO
MIDASTER系列：MDV
6SE70系列（FC、VC、SC）
5、全数字直流调速装置 6RA23、6RA24、6RA28、6RA70 系列
