【友情提示】：本产品仅供科研研究使用，不得用于人体临床直接检测。避免给您带来不必要的损失，请仔细阅读购买说明！

本试剂盒仅供研究使用，齐一生物销售：021－6034 8496；181214 53965；173021 04490欢迎选购！

操作步骤

1.准备试剂，样品和标准品

2.加入准备好的样品和标准品，37℃反应30分钟

3.洗板5次，加入酶标试剂，37℃反应30分钟

4.洗板5次，加入显色液A、B，37℃显色15分钟

5.加入终止液

6.15分钟之内读OD值

7.计算
齐一生物供应ELISA试剂盒检测的目的是为实验提供准确可靠的定量分析实验依据。为了保证实验数据的可靠性，在实验过程中必须坚持全面质量控制和全过程质量控制。在收集标本前都必须有一个完整的计划。

【人ATP合酶6(ATP6)ELISA试剂盒】样本保存条件：

1.2-8℃冰箱*多放2周

2.-20到-50℃的冰箱可以放3-6个月

3.-50℃以下的冰箱，可以放一年

【人ATP合酶6(ATP6)ELISA试剂盒】样本收集

1.血清样本用干燥管（红色）或者促凝管（黄色）收集

2.血浆用抗凝管，一般有EDTA抗凝（紫色）、枸橼酸钠抗凝（黑色或者蓝色）

3.动物组织匀浆（细胞）：

              1g组织加入9ml PBS（浓度为0.1M，pH为7.4的）测分泌型指标

              1g组织加入1ml组织裂解液加入8ml PBS 测细胞内

粪便样本：1g样本+9ml PBS（浓度为0.01M，pH为7.4的）

没有PBS的话也可以用一下生理盐水，还是用PBS

【人ATP合酶6(ATP6)ELISA试剂盒】样本离心转速及时间

1.试管采集的样本：3000转，离心五分钟取上清

2.离心管或者EP管采集的样本：5000－－8000转3分钟取上清

3..样本保存－－如果样品不立即使用，应将其分成小部分-70 ℃保存，避免反复冷冻。尽可能的不要使用溶血或高血脂血。如果血清中大量颗粒，检测前先离心或过滤。不要在37℃或更高的温度加热解冻。应在室温下解冻并确保样品均匀地充分解冻。

【人ATP合酶6(ATP6)ELISA试剂盒】以上样本采集及处理方式供您参考，如有问题请来电，齐一生物销售：021－6034 8496；181214 53965；173021 04490

9020195Clamp, worktable (marked "II"), CX1CNY

9020190Tubing Weight, RCSCNY

9020183PCB, LED, Upgrade, RGQCNY

9020163Vacuum Pump (220-240 V), PyroQ24VWCNY

9020144Felt shim, Receiver, QXCNY

9020089Fuse Insert, 15 A, TLyser 2CNY

9239522O Ring, #010, Nitrile, 70D (Set of 10)CNY

9239516Fuse&Holder,1Amp,Fblo,PicoSmd(10)CNY

9239508EX CBA, MC DSP, w/USBCNY

9239505Fitting,Adap1/8Ba-Mal1/4-28Flat(10)CNY

9239493Hood LEDCNY

9239481Fluidics, Luminex 100CNY

9239441Barcode scanner, hand-held, v2.0hand-held scanner. This is a valid item in SAP.CNY

9232886Camera, bar-code, DensoCNY

9232869Lightway, door, buffer track, BR8000CNY

9232834Tips Disposable Eppendorf 300 ulCNY

9232808Tool, Calibration, PlateReader auto pos.CNY

9236503Training Customized BioRobotCNY

9232756Back Reagent Plate, printedCNY

9236492Centrifuge 4-16KS, Full Agreement, no PM"Repair service delivery: onsite

Service response time (repair): 48 hours/2 business days

Periodic inspection/maintenance: not included

Inspection/maintenance delivery: not applicable

Cost coverage for Repair Parts : yes, full coverage

Cost coverage for labor: yes, full coverage

Cost coverage for travel: yes, full coverage

Replacement system (Loaner) provision: not applicable

Transportation cost coverage: not applicable"CNY

9236485Full Agreement, Plato 3, 1 yrThe Full Agreement Plato 3 provides full service coverage for the Plato 3 workstation. Costs for service visits are fully covered including travel, labor, ａnd parts. The agreement also includes one annual preventive maintenance visit, with costs for labor ａnd parts covered. With a Full Agreement, there is a priority response time of 48 hours (2 working days).CNY

9013063Plate Stacker, detachable, BR8000CNY

9013004Gripper set, T-handlerCNY

672291ipsogen PML-RARA bcr2 StandardsCNY

670724ipsogen BCR-ABL1 Mbcr IS-MMR Kit (30) CECNY

386123Matrix Standard BT5 multi cap. (25)CNY

384013Investigator DIPplex Kit (25)CNY

9001510Hybrid Capture System 2 (non-US)CNY

9001272TissueRuptor (230V, 50-60 Hz, EU/CH)CNY

4877004pg AIV-H9 RT-PCR ASSAYCNY