产品展示
人EB病毒IgG(EBvIgG)ELISA试剂盒现货
点击次数:15发布时间:2016/8/14 18:14:24
更新日期:2016/8/14 18:14:24
所 在 地:中国大陆
产品型号:
优质供应
详细内容
齐一生物销售:021-6034 8496;181214 53965;173021 04490
1。我必须运行所有的标准和样品的重复?
是的,重复的运行,以监测测定的精度和提高检测结果的信心。
2。我必须在一次运行所有的样品吗?
不,每个试剂盒采用stripwell微孔板。这允许用户在不同的时间来分析不同数量的样品。
3。什么类型的可重复性的结果,得到与分析?
每一个工具都有一个包含一个典型数据的图表的手册。在运营商的任何变化,移液和洗涤技术,培养时间、温度、试剂盒的年龄可以引起变化的结果。每个用户都应该得到自己的标准曲线。
4。是否有可能储存的试剂比表示?
在不推荐使用条件下的部件组件的存储,以保证测试的正确性能。
5。我应该如何储存我的样品?
样品应保存在-20°C或更低的温度。长期储存,建议冻结他们在- 70余。
6。我可以修改协议吗?
BG的ELISA试剂盒进行了优化,提供*佳的结果。修改的格式或协议可能会给出错误的结果。
7。我可以使用一个不建议在试剂盒插入的样本类型吗?
该试剂盒已被验证在试剂盒插入的样品类型。未经检验的样品类型。为进一步信息的联系技术服务。
8。我的样本产生的值,在动态范围内的测定。我可以使用这些值吗?
建议只有在标准曲线的范围内下降的样本值。标准曲线的范围内的值一般是非线性的,这可能导致不正确的外推值。产生值高于标准的样品应为(进一步)稀释和重复。如果样品低于该测定的范围内,该样品被认为是不可检测的。
9。我每次都要运行一个空白或零标准吗?
是的,这些都是必需的计算,并反映任何微妙但显着的性能变化,从一天到一天,检测到检测。当排除特定的检测问题的来源时,它们也非常有帮助。
10。我能改变我在检测中使用的样本量吗?
不建议你改变卷由于BG工具被设计为*佳的性能在给定的体积
11。可以使用不同的组件组件吗?
每一个组件包含有特定批号的组件,以确保所有的组件都进行优化,以及与组件中的所有其他组件。对这些特定的地段进行质量检验。这是从来没有建议使用你自己的组件或组件从其他包或供应商。
12。我的标准曲线看起来很好,但我没有得到一个信号,我的样本,当我预期,为什么?
样品不包含被分析物。一个矩阵的效果可能是掩盖检测。确保推荐的稀释液在试剂盒插入后按规定进行。如果建议稀释,请检查是否正确进行稀释。过稀释会导致样品在标准曲线的范围内下降。
13。你怎么推荐我洗盘子?
如果您使用的是一个自动平板洗衣机,我们建议定期检查校准,并将该系统在洗涤前冲洗缓冲液冲洗。手动洗衣机也是一样的。一个中继器或洗瓶也可以使用。用户应小心,以确保所有的内容都是送气和板拍干的无尘纸。【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
14。我需要用一个盘子吗?
可靠的结果可以得到无板振动,但外径的一般会低于那些使用平板振动器。
15。为什么我要用波长校正450-570nm之间?
对于酶联免疫吸附试验,在双波长读的是做正确的光密度贡献的塑料以及,灯和光学波动。
16。如果我提我的样本,我还需要遵循推荐的稀释液试剂盒中插入了吗?
提取过程中所需的样本稀释量将受到影响的纯化和浓度的影响的协议使用。稀释或浓缩的金额将由*终用户决定。
17。什么是预期的分析物浓度,我应该找到?
一个给定的分析物的量可能会有所不同,不仅从物种的物种,但也组织和细胞来源。这个信息的*佳来源是目前的文献,很容易通过互联网在多个科学数据库访问。
18。我的光密度有点高(或较低),比那些在手册中,与我的试剂盒来了。为什么?
光学密度受影响
1. Do I have to run all of my standards and samples in duplicate?
Yes, the duplicates are run in order to monitor assay precision and increase confidence in the assay results obtained.
2. Do I have to run all of my samples at one time?
No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.
3. What types of reproducible results are obtained with the assays?
Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
4. Is it possible to store the reagents other than indicated?
Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.
5. How should I store my samples?
Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.
6. Can I modify the protocol?
BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate and wrong results.
7. Can I use a sample type that is not recommended in the kit insert?
The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.
8. My samples generated values that were outside the dynamic range of the assay. Can I use these values?
It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted and the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
9. Do I have to run a Blank or Zero Standards every time?
Yes, these are required for the calculations, and reflect any subtle but significant performance changes from day to day and assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.
10. Can I alter the volume of sample I use in the assay?
It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes
11. Can components from different kits be used?
Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.
12. My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?
The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.
13. How do you recommend I wash my plate?
If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, and that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated and the plate tapped dry on lint-free paper.
14. Do I need to use a plate shaker?
Reliable results can be obtained without a plate shaker, but the O.D.'s will generally be lower than those obtained using a plate shaker.
15. Why do I have to use wavelength correction between 450-570nm?
For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp and optical fluctuations. 【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
16. If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?
The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification and concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.
17. What is the expected concentration of analyte that I should expect to find?
The amount of a given analyte may vary not only from species-to-species, but also between tissue and cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.
18. My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?
The optical density is affected by a number of physical conditions such as time and temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.
19. What are the reasons for High Background?
1) Improper Washing: Check volume of washing buffer reservoir and make sure all recommended washing steps are performed.
2) Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
3) Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.
4) Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times and temperatures. However, if all wells are intensely and equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.
NG0329 碱性磷酸酶染液 50片 染色
NG0330 酸性磷酸酶染液 50片 染色
NG0331 酸性酯酶染液 5.0ml×4 染色
NG0332 中性酯酶染液 5.0ml×4 染色
NG0333 碱性酯酶染液 5.0ml×4 染色
NG0334 双重酯酶染液 5.0ml´4 染色
NG0335 快速血细胞染液 50ml×2 染色
NG0336 糖元染液 10ml×4 染色
NG0337 苏木素染液 50ml×1 染色
NG0338 伊红染液 100ml×1 染色 【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
NG0339 H-E染液 染色
NG0340 瑞氏染液 50ml×2 染色
NG0341 瑞氏-姬姆萨复合染液 50ml×2 染色
NG0342 姬姆萨染液 染色
NG0343 巴氏染液脱落细胞染色 染色
NG0344 快速H-E组织细胞及脱落细胞染液 10ml×4 染色
NG0345 革兰氏染液 50ml×4 染色
NG0346 抗酸染液 50ml×2 染色
NG0347 细胞活性鉴别染液 20ml 伊文斯蓝法
NG0348 血管通透性测试染液 20ml 美蓝法
NG0349 过氧化物酶染液 5ml 染色
NG0350 磷酸盐缓冲液 8元/100ml 建成
NG0351 碳酸盐缓冲液 8元/100ml 建成
NG0352 Tris-HCl缓冲液 20元/100ml 建成
NG0353 醋酸钠/醋酸缓冲液 8元/100ml 建成
NG0354 巴比妥钠/盐酸缓冲液 20元/200ml 建成 【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
NG0355 硼砂/盐酸缓冲液 20元/200ml 建成
NG0356 氯化钾/盐酸缓冲液 8元/100ml 建成
NG0357 柠檬酸钠/盐酸缓冲液 12元/100ml 建成
NG0358 饱和苦味酸 20元/100ml
NG0359 Xmol/L盐酸 6元/100ml
9237156 Controller Board XYP CNY
9237122 Upgrade App., QIAprep Turbo Take advantage of our instrumentation and molecular biology expertise to install QIAprep Turbo 96 on your BioRobot System. The onsite protocol installation visit includes all travel and labor for the visit to install the standard QIAGEN QIAprep Turbo protocol, plus the QIAprep Turbo 96 BioRobot 8000 Kit (4-plate) SAP #962141 CNY
9237096 Training, BR QIAGEN Introductory A minimum of 4 people are required to attend this training. The QIAGEN BioRobot Systems Introductory Training is offered at QIAGEN training facilities to refresh current users or introduce new users to the QIAGEN BioRobot Systems hardware and QIAsoft Operating System software. Participants are given an overview of the hardware system and maintenance/troubleshooting procedures before exploring the three software environments of the QIAsoft Operating System. Each software environment is explained in detail, and users are taken step by step through each section with explanations on how to best adjust or write new protocols for their BioRobot System. An introduction to teaching new and exisiting slots and racks is followed by writing a new protocol which uses these with the three available pipetting options, pooling, distributing and transfer. Users are encouraged to write protocols in the proper format creating prompts, flushes, and correct pipetting parameters. The training concludes as protocols are tested and run reinforcing concepts and demonstrating success. CNY
9237094 Training, LiquiChip On-site On-site Training 1 day LiquiChip CNY
9021147 Bottle, Reagent (with cap assy), DCU CNY
9021110 Skin Panel, Upper Left Rear, DCU CNY
9021105 Skin Panel, Output Drawer, DCU CNY
9021082 PLC Module, Dual RS-232, Slot 7, DCU CNY
9021073 Gateway 1, CC-Link, DCU CNY
9021048 Set, SP-AS assembly, Qsym CNY
9020935 Kit, calibration, overshoot, RGQ CNY
9020711 Table plate, complete, C18 CNY
9020628 Door, consumables, right, Cabinet Qsym CNY
9020602 Packing Foam Set - DML2000 CNY 【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
9020353 SOW RGQ Software (RGQ Series II) CNY
9020328 PCB - LED, RGQII CNY
9020289 Tool, Adj., Extractor, Qsym CNY
9020288 Packaging (complete), QGY CNY
9017656 Adapter Set, press.sensor, BR8 RD CNY
9020253 Waste bag, Qsym CNY
9020244 QIAsymphony Cabinet SP CNY
9017435 Sample tracking, Qsym CNY
9017186 Plunger set (6), Biorobot EZ1 CNY
9020239 PM kit, C18 & QIAxtractor (UV/HEPA), CX1 CNY
9020204 Module, Thermocycler, 24 well, GPX CNY
9020197 PCB, breakout, P-axis, 8 ch. , QX1 CNY
9239527 O Ring, #012, Nitrile, 70D (Set of 20) CNY
9020169 Rotor Hub Assy, RG3 CNY
9020160 Insulation disc - chamber side, RG3 CNY
9020133 O Ring Kit VPT, PyroQ24VW CNY 【人EB病毒IgG(EBvIgG)ELISA试剂盒现货】
9239513 SD Controller CNY
9239502 Fitting,1/4-28x1/8Barb,FaceSeal (10) CNY
9239495 XY Motor Driver w/Encoder CNY