产品展示
人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家
点击次数:16发布时间:2016/8/16 21:25:09

更新日期:2016/8/16 21:25:09
所 在 地:中国大陆
产品型号:
优质供应
详细内容
1.购买我公司任意ELISA试剂盒指标享受免费代测,并提供技术指导服务!
二、实验材料与试剂配制:
1. 仪器与材料:酶标仪(使用前预热30分钟),微量加液器、吸头、蒸馏水或去离子水,滤纸。
2. 缓冲液使用:加5ul 的缓冲液于50ul 的样品中,如果样品量不够或者不确定,缓冲液和样品的混合比例不要小于1:10即可混匀,静置1小时备用(如果标本是血清或者血浆,此步骤忽略)。
3. 洗液的配制:按1:100的比例配制洗液备用。
齐一生物销售:021-6034 8496;181214 53965;173021 04490
【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】三. 仔细阅读说明书
1.检查试剂盒标签上的有效期。如果超过有效期,请勿使用。
2. 按说明书确定所有试剂齐全(数量、体积)
3. 标本制备要规范,每份标本体积要按2-3个复孔以上的量制备(贮存),尽量分装做备份。
4.短期内无法实验者,注意低温保存
5.准备好所有实验额外所需物品,(比如移液器,试管,清洗器,酶标仪)
6. 按说明书将所用试剂平衡至室温,根据检测标本数量确定所需试剂的量
7.检查试剂盒内每种试剂的贮存条件,保证所有试剂均按照试剂盒内说明书推荐的条件存储。 【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】
8.检查不稳定或者变质的试剂溶液(比如沉淀或变色)。有些试剂,比如标准品稀释液或者检测稀释液,可能在设计时就含有沉淀物。所有试剂在滴入酶标板之前,必需充分混匀。而由于沉淀物的特性,在加入酶标板之前,必需不停搅拌。
9.保证充分的孵育时间和温度。
10.切勿使用不同生产批号的试剂取代现有试剂或混合现有试剂。
11.在混合或溶解蛋白溶液时,避免泡沫产生。
12.在实验开始之前,安排好实验流程。在实验开始之前,清洁工作台。
13.若有问题,应与我公司或代理商的技术支持联系
【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】四、客户须知
齐一生物销售:021-6034 8496;181214 53965;173021 04490
1.在收集标本前都必须有一个完整的计划,必须清楚要检测的成份是否足够稳定。我们提倡新鲜标本尽早检测,对收集后当天就进行检测的标本,及时储存在4℃备用,如有特殊原因需要周期收集标本,请造模取材后,将标本及时分装后放在-20℃或-70℃条件下保存。因冰室与室温存在一定温差,蛋白极易降解,直接影响实验质量,所以避免反复冻融。部分标本也可加入适当防腐剂,激素类标本需添加抑肽酶。
2.试剂盒代测标本的客户取材前须向我司销售人员索要说明书,具体操作注意事项请与我司技术人员沟通。
3.液体类标本:标本必须为液体,不含沉淀。包括血清、血浆、尿液、胸腹水、脑脊液、细胞培养上清、组织匀浆等。
4.购买前请提前告诉我们:您样本的种属、样本数量、待测指标及其它特殊要求。
【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】五、代测数据详细内容
1、ELISA标准曲线;
2、实验具体详细步骤;
3、完整的实验报告(试剂耗材,实验方法,实验结果及结果说明);
4、实验进行阶段,我公司客服人员会及时向您汇报实验进程。
9238854 #BR M96, Basic Agreement The Basic Cover Agreement M96 provides full service coverage for the BioRobot M96. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days. CNY
9238842 RS232 box, non-online fill, RapidPlate CNY
9241215 Full Agreement Depot Repair, Shaker, 1yr "The Full Agreement Depot Repair, Shaker provides full service coverage for the plate shaker used in the digene HPV application. The service is conducted as an instrument exchange service.
All shipping, labor and repair part costs related to an instrument exchange are included for 1 year. Instrument exchange time is 2 - 3 working days." CNY
9238833 #BR 9604, Basic Agreement The Basic Cover Agreement 9604, 1 PM provides full service coverage for the BioRobot 9604. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days. CNY
9238832 BR 9600, Basic Agreement The Basic Cover Agreement 9600 provides full service coverage for the BioRobot 9600. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days. CNY 【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】
9238819 Rect. carrier for 5 glass tubes 25ml CNY
9237527 Software LiquiChip Workstation IS V2.2. CNY
9237380 Installation, BR MDx & 2 react. setup Installation and training, including two customized reaction setup protocols CNY
9237379 Installation, BR MDx & 1 react. setup Installation and training, including one customized reaction setup protocol CNY
9237378 BR MDx, Installation The Installation, BR MDx facilitates the quick implementation of the BioRobot MDx into the lab routine by minimizing the instrument start-up phase. It covers the hardware and software installation of the BioRobot MDx instrument and provides the user with an introductory training on operation and user maintenance. The installation includes labor and travel costs. The performance of the installation process is documented on a GMP/GLP-compliant Field Service document. CNY
9237175 Guard Fan, Platic XYP CNY
9233209 Tubing, 3/2, CNY
9233155 Power Cord, European CNY
9236418 Board, CPU, TWI CNY
9236345 Red LSR CNY
9236166 Safety shield, RapidPlate CNY
9230863 Anpressplatte Rose-80 CNY
9235538 Teaching Tool CNY
9230282 Cable, RS323, robot to syringe pump, 225 CNY
5050-2002 hc2 Software V2 Package CNY
BS96RNA BioSprint 96 to RNA (384) - UDP CNY 【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】
9240730 Tubing, 1/4" OD, Red, AP CNY
9240713 Poly Muffler Kit, AP96/196 CNY
9240690 Bearings, Lead Screws, AP CNY
9243654 Comprehen Valid., Other Quant. Sys. """The Comprehensive Validation Support plan specific to a laboratory's needs will incorporate all of the requirements for the internal validation guidelines from the FBI's Quality Assurance Standards (QAS).
The Comprehensive Validation Support service includes all travel and labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, and amplify the validation study samples and may require multiple individuals. Usually, two weeks is required to analyze the data and one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.
Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform and complete all extractions, quantifications, amplfications, and capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation.
Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation. Non-QIAGEN chemistry and accessories are not included and should be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) and required substrates (swabs, materials, etc). For planning purposes and to ensure a smooth process, the Customer is expected to have all materials on-hand and inventoried one (1) week prior to the validation start date.
Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) and STR (amp) analysis and linkage to starting samples.
Validation data CD/flashdrive – QIAGEN will review the validation data and draft a validation summary document, ensuring compliance with the FBI's QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review and signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.
Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation and generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager and the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """ CNY
6000-5013 LumiCheck Plate User Package CNY
288103 bactotype Mycoplasma Mg/Ms PCR Kit (24) CNY
1048147 QIAamp Viral RNA Mini Accessory Set CNY
270043 cattletype BHV1 gB Ab (5) CNY
1019992 Buffer Set (RNeasy 96 BioRobot 9604 Kit CNY
273401 pigtype Toxoplasma Ab (1) CNY
QY-x1888 MCF-7/Adr 乳腺腺癌/阿霉素耐药株
QY-x1889 KB 口腔表皮样癌 SK-BR-3 乳腺腺癌
QY-x1890 Hep-2 喉癌 A2780 卵巢癌 【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】
QY-x1891 Ec109 食管癌 CoC1卵巢癌
QY-x1892 BGC-823 胃腺癌 CoC2卵巢癌
QY-x1893 MGC-803 胃腺癌 OVCAR-3 卵巢癌
QY-x1894 SGC7901 胃低分化腺癌 SK-OV-3 卵巢腺癌
QY-x1895 HuTu-80 十二指肠腺癌 SKOV-3/DDP 卵巢癌顺铂耐药株
QY-x1896 Caco-2 结肠癌 HeLa 宫颈癌
QY-x1897 COLO 205 结肠癌 HelaS3 宫颈癌
QY-x1898 COLO 320DM 结肠癌 HEC-1B 子宫内膜癌
QY-x1899 HCT-8 回盲肠腺癌 JEG-3 绒癌
QY-x1900 HCT-116 低分化结肠腺癌 Du-145前列腺癌
QY-x1901 HT-29 结肠腺癌 LNCaP 前列腺癌
QY-x1902 LoVo 结肠癌 LNCaP clone FGC 前列腺癌
QY-x1903 SW480 结肠癌
QY-x1904 PC-3 前列腺癌
QY-x1905 BEL-7402 肝细胞癌 Tsu-Prl非雄激素依赖型前列腺癌
QY-x1906 HCC-9204 肝癌HOS 骨肉瘤 【人狼疮抗凝抗体(LAC/LA)ELISA试剂盒厂家】
QY-x1907 Hep3B 肝癌 MG-63 成骨肉瘤
QY-x1908 Hep G2 肝癌 Saos-2
QY-x1909 骨肉瘤
QY-x1910 SMMC-7721 肝癌 U-2 OS 骨肉瘤
QY-x1911 PANC-1胰腺导管上皮癌OS-732 骨肉瘤(瘤株)
QY-x1912 Panc 10.05 胰腺腺癌 A-204 横纹肌肉瘤
QY-x1913 SW1990胰腺腺癌HT1080纤维肉瘤
QY-x1914 SK-RC-42 肾癌 A375 皮肤黑色素瘤
QY-x1915 RCC-krause 肾癌 A875 黑色素瘤
QY-x1916 Ketr-3 肾癌(瘤株) SK-HEL-1 皮肤黑色素瘤
QY-x1917 SW 13 肾上腺皮质瘤 A431 皮肤基底细胞癌
QY-x1918 95-C 低转移肺癌 CEM 白血病
QY-x1919 95-D 高转移肺癌 K562 慢性髓原白血病
QY-x1920 973 肺腺癌 HPB-ALLT细胞白血病