跑偏开关PST-A-20-35-参数电压400V是用于检测带式输送机运行过程中输送带跑偏程度并进行报警以及自动触发紧急停机的种保护装置。是用于检测带式输送机运行过程中输送带跑偏程度并进行报警以及自动触发紧急停机的种保护装置。使用跑偏开关可防止昂贵的输送带受损害以防止进步的工矿事故和人生伤害。两跑偏开关在安全运行输送系统里是不可缺少的保护装置，其广泛应用于钢铁厂、火力发电厂、水泥厂、化工厂、港口等。

跑偏开关PST-A-20-35应用范围                                                        
常规皮带输送机，包括平皮带输送机和槽形皮带输送机
地下、索道支撑皮带输送机
轮船装卸系统、堆取料输送机
本系列跑偏开关具有两动作功能。动作用于报警，二动作用于自动停机。胶带机在运行中，当胶带跑偏且与本开关立辊接触时，立辊自转，若跑偏量继续加大，则挤压立辊发生偏移。当立辊偏转角度超过20°时，开关动作，输出报警信号。当立辊偏转角度超过35°以上时，二开关动作，输出停机信号。开关信号用于报警，如果将此信号与跑调整装置相接，即可实现不停机状态下的跑偏自动调整。二开关信号用于停机，将此信号接至控制线路中，即可实现重度跑偏状态下的自动停机。当故障排除后，输送带离开立辊正常运转时，立辊可自动复位。
Deflection switch PST-A-20-35 application range

Conventional belt conveyors include flat belt conveyors ａnd trough belt conveyors

Underground, ropeway support belt conveyor

Ship loading ａnd unloading system, stacker ａnd reclaimer conveyor

This series of off-track switches has two levels of action function. The first action is used for alarm, ａnd the second action is used for automatic s. When the rubber belt machine is in operation, the vertical roller will rotate when the rubber belt is deviated ａnd in contact with the switch vertical roller. If the deviation continues to increase, the extrusion vertical roller will be deviated. When the deflection Angle of the vertical roll exceeds 20°, the first stage switches to output alarm signal. When the vertical roll deflection Angle exceeds 35° or above, the two-stage switch action will output the s signal. The first stage switch signal is used for alarm. If the signal is connected with the running adjustment device, automatic deviation adjustment can be realized under the condition of not sping. Secondary switch signal is used for sping. Connect this signal to the control line to realize the automatic s under the state of heavy off-track. When the conveyor belt leaves the vertical roller for normal operation after troubleshooting, the vertical roller can reset automatically.

原创作者：麻城施迈赛工业自动化有限公司