产品展示
人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家
点击次数:11发布时间:2016/8/15 21:31:58

更新日期:2016/8/15 21:31:58
所 在 地:中国大陆
产品型号:
优质供应
详细内容
|
价格详细资料:试剂盒价格电议,齐一生物销售:021-6034 8496;181214 53965;173021 04490,齐一生物科技(上海)有限公司提供ELISA试剂盒受到了广大研究所.中科院科研单位一致肯定和认同。齐一生物大品牌保证,倾力为国内外科研院校实验室提供*优质产品。
【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】注意事项
1. 当混合蛋白溶液时应尽量轻缓,避免起泡。
2. 洗涤过程非常重要,不充分的洗涤易造成假阳性。
3. 一次加样时间控制在5分钟内,如标本数量多,推荐使用排枪加样。
4. 请每次测定的同时做标准曲线,做复孔。
5. 如标本中待测物质含量过高,请先稀释后再测定,计算时请*后乘以稀释倍数。
6. 在配制标准品、检测溶液工作液时,请以相应的稀释液配制,不能混淆。
7. 底物请避光保存。
8. 不要用其它生产厂家的试剂替换试剂盒中的试剂。
FOR RESEARCH USE ONLY
Drug Names
Generic Name:
This kit can be used for determination of serum, plasma and liquid samples Organization Content.
The experimental principle:
The product levels were measured in samples of the kit by double antibody sandwichmethod. The product with the purified antibody coated microtiter plate, made of solid phase antibody, to package is the product antigen monoclonal antibodies are then added to the micropores, the product and then with HRP labeled antibody binding, the formation of antibody - antigen - antibody complex enzyme label, after thorough washing with TMB chromogenic substrate. TMB in the HRP enzyme catalytic conversion into the blue, and in the action of acid into the final yellow. This product is positively related to the depth of color and in the samples. Instrument measured absorbance in the 450nm wavelength with ELISA (OD), the product concentration in the samples was calculated by standard curve.
Materials provided with the kit
Materials provided with the kit 96 determinations Storage
User manual 1
Closure plate membrane 2
Sealed bags 1
Microelisa stripplate 1 2-8℃
Standard:360ng/L 0.5ml×1 bottle 2-8℃
Standard diluent 1.5ml×1 bottle 2-8℃
HRP-Conjugate reagent 6ml×1 bottle 2-8℃
Sample diluent 6ml×1 bottle 2-8℃
Chromogen Solution A 6ml×1 bottle 2-8℃
Chromogen Solution B 6ml×1 bottle 2-8℃
Stop Solution 6ml×1 bottle 2-8℃
wash solution (20ml×30 fold)
×1bottle 2-8℃
Specimen requirements
1. serum- coagulation at room temperature 10-20 mins,centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again. 【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】
2. plasma-use suited EDTA or citrate plasma as an anticoagulant,mix 10-20 mins ,centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again.
3. Urine-collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again. The Operation of Hydrothorax and cerebrospinal fluid Reference to it.
4. cell culture supernatant-detect secretory components, collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant,detect the composition of cells, Dilut cell suspension with PBS(PH7.2-7.4), Cell concentration reached 1 million / ml, repeated freeze-thaw cycles, damage cells and release of intracellular components, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again.
5. Tissue samples- After cutting samples, check the weight,add PBS(PH7.2-7.4), Rapidly frozen with liquid nitrogen, maintain samples at 2-8℃ after melting,add PBS(PH7.4), Homogenized by hand or Grinders, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant.
6. extract as soon as possible after Specimen collection,and according to the relevant literature, and should be experiment as soon as possible after the extraction. If it can’t, specimen can be kept in -20 ℃ to preserve, Avoid repeated freeze-thaw cycles.
7. Can’t detect the sample which contain NaN3, because NaN3 inhibits HRP active.
Assay procedure
1.Dilute and add sample to Standard: set 10 Standard wells on the ELISA plates coated, add Standard 100μl to the first and the second well, then add Standard dilution 50μl to the first and the second well, mix; take out 100μl form the first and the second well then add it to the third and the forth well separately. then add Standard dilution 50μl to the third and the forth well ,mix ; then take out 50μl from the third and the forth well discard, add 50μl to the fifth and the sixth well ,then add Standard dilution 50μl to the fifth and the sixth well, mix ; take out 50μl from the fifth and the sixth well and add to the seventh and the eighth well, then add Standard dilution 50μl to the seventh and the eighth well ,mix ; take out 50μl from the seventh and the eighth well and add to the ninth and the tenth well, add Standard dilution 50μl to the ninth and the tenth well, mix , take out 50μl from the ninth and the tenth well discard(add Sample 50μl to each well after Diluting ,(density: 240ng/L,160ng/L ,80ng/L,40ng/L, 20ng/L)
2.add sample:Set blank wells separately (blank comparison wells .don’t add sample and HRP-Conjugate reagent, other each step operation is same). testing sample well. add Sample dilution 40μl to testing sample well, then add testing sample 10μl (sample final dilution is 5-fold), add sample to wells , don’t touch the well wall as far as possible, and Gently mix. 【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】
3.Incubate: After closing plate with Closure plate membrane ,incubate for 30 min at 37℃.
4.Configurate liquid: 30-fold (or 20-fold)wash solution diluted 30-fold (or 20-fold) with distilled water and reserve.
5.washing:Uncover Closure plate membrane, discard Liquid, dry by swing, add washing buffer to every well, still for 30s then drain, repeat 5 times, dry by pat.
6.add enzyme:Add HRP-Conjugate reagent 50μl to each well, except blank well.
7.incubate:Operation with 3.
8.washing:Operation with 5.
9.color:Add Chromogen Solution A 50ul and Chromogen Solution B to each well, evade the light preservation for 15 min at 37℃
10.Stop the reaction:Add Stop Solution50μl to each well, Stop the reaction(the blue color change to yellow color).
11.assay:take blank well as zero , Read absorbance at 450nm after Adding Stop Solution and within 15min.
Important notes
1. The kit takes out from the refrigeration environment should be balanced 15-30 minutes in the room temperature, ELISA plates coated if has not use up after opened, the plate should be stored in Sealed bag.
2. washing buffer will Crystallization separation, it can be heated the water helps dissolve when dilute . Washing does not affect the result.
3. add Sample with sampler Each step, And proofread its accuracy frequently, avoids the experimental error. add sample within 5 mins, if the number of sample is much , recommend to use Volley . 【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】
4. if the testing material content is excessively higher (The sample OD is bigger than the first standard well ),please dilute Sample (n-fold), Please diluente and multiplied by the dilution factor.(×n×5).
5. Closure plate membrane only limits the disposable use, to avoid cross-contamination.
6. The substrate evade the light preservation.
7. Please according to use instruction strictly, The test result determination must take the microtiter plate reader as a standard.
8. All samples, washing buffer and each kind of reject should according to infective material process.
9. Do not mix reagents with those from other lots.
Calculate:
Take the standard density as the horizontal, the OD value for the vertical ,draw the standard curve on graph paper, Find out the corresponding density according to the sample OD value by the Sample curve, multiplied by the dilution multiple, or calculate the straight line regression equation of the standard curve with the standard density and the OD value ,with the sample OD value in the equation, calculate the sample density, multiplied by the dilution factor, the result is the sample actual density.
|
Storage and validity
1.Storage: 2-8℃.
2.validity: six months.
└ 肾近曲管状上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 肾皮层上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 肾上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 输尿管上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 肾实质细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 肾系膜细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 膀胱上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 膀胱平滑肌细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 肾动脉内皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 肾动脉平滑肌细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 肾成纤维细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 膀胱成纤维细胞总RNA 1μg/1μl(10μg/20ug/50ug) 【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】
└ 尿道上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 胎盘羊膜细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 胎盘滋养层细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 胎盘绒毛膜细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 子宫平滑肌细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 子宫成纤维细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 卵巢上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 卵巢成纤维细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 卵巢微血管内皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 子宫内膜上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 淋巴内皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 淋巴成纤维细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 淋巴血管内皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 脐带单核细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 外周血白细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 乳腺上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug) 【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】
└ 乳腺成纤维细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 前列腺上皮细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 胰岛β细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 前列腺平滑肌细胞总RNA 1μg/1μl(10μg/20ug/50ug)
└ 前列腺成纤维细胞总RNA 1μg/1μl(10μg/20ug/50ug)
9240663 Nut, Flangeless,1/4-28, Black, AP CNY
9240634 Power Supply, Main PCB, Aztec, AP196/98 CNY
9240630 Power Supply, 5VDC 1.5 AMP, AP96 CNY
9240593 Unload Valve, Pump, Pressure, AP196/98 CNY
9240562 Fuse, PCB, 315, Eppendorf, AP196/98 CNY
9240536 Motor Assy, SiNug, 17, All, AP96/196 CNY
9240514 CD R/W, AP196/98 CNY
9240504 PC-104, AP98 CNY
9240346 Autopure, Full Agreement "Repair service delivery: onsite
Service response time (repair): 48 hours/2 business days
Periodic inspection/maintenance: yes, 1/agreement year
Inspection/maintenance delivery: onsite
Cost coverage for repair parts: yes, included
Cost coverage for labor: yes, included
Cost coverage for travel: yes, included
Replacement system (Loaner) provision: not included
Transportation cost coverage: not applicable" CNY
9240098 Re-Installation, BR EZ1 The Re-Installation, BR EZ1 facilitates quick implementation of system back into lab routine by minimizing instrument set-up phase. It covers hardware and software check of instrument and provides user with operator refesher overview. Re-installation includes labor and travel costs. Re-installation performance process is documented on a GMP/GLP-compliant Field Service document. CNY
9239852 Foot bumpers, v2.0 (4) CNY 【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】
9019944 Cable, P-axis, wires, 8 ch. , C18 CNY
9238880 Bearings up. & low, BS96 CNY
9238836 BioSprint96, Basic Agreement, no PM "Repair service delivery: onsite
Service response time (repair): 5 business days
Periodic inspection/maintenance: not included
Inspection/maintenance delivery: not applicable
Cost coverage for Repair Parts : yes, full coverage
Cost coverage for labor: yes, full coverage
Cost coverage for travel: yes, full coverage
Replacement system (Loaner) provision: not applicable
Transportation cost coverage: not applicable" CNY
9241211 Full Agreement Depot Repair, DML2000, 1y "The Full Agreement Depot Repair, DML2000 provides full service coverage for the DML 2000 luminometer. The service is conducted as an instrument exchange service.
All shipping, labor and repair part costs related to an instrument exchange are included for 1 year. Instrument exchange time is 2 - 3 working days." CNY
9241191 Magnet, tool, QX CNY
9238825 Spare bucket for plate rotor CNY
9238815 Rect. carrier for 12 tubes 10 ml w/ cap CNY
9019472 TAPE SPACER CLEAR GS CNY
9019464 UV tube, Cxx CNY
9243650 Comprehen Valid., EZ1/QIAcube/QIAsymph """The Comprehensive Validation Support plan specific to a laboratory's needs will incorporate all of the requirements for the internal validation guidelines from the FBI's Quality Assurance Standards (QAS).
The Comprehensive Validation Support service includes all travel and labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, and amplify the validation study samples and may require multiple individuals. Usually, two weeks is required to analyze the data and one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.
Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform and complete all extractions, quantifications, amplfications, and capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation.
Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation. Non-QIAGEN chemistry and accessories are not included and should be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) and required substrates (swabs, materials, etc). The Customer is expected to have all materials on-hand 1 week prior to the validation start date.
Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) and STR (amp) analysis and linkage to starting samples.
Validation data CD/flashdrive – QIAGEN will review the validation data and draft a validation summary document, ensuring compliance with the FBI's QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review and signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.
Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation and generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager and the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """ CNY
9237333 Install, BR plus 3 integr. w. scheduling Installation and training, BioRobot System including three approved integration devices with scheduling CNY
9237328 Upgrade, BR & 2 ext. devices w. sched. Upgrade BioRobot with two approved integration devices using scheduling software CNY
9237173 Shield, V-housing CNY
9233208 Tubing, liquid system 2.5/1.5 CNY
9237155 V-Housing with Sample Needle CNY
9237150 Heater Top CNY 【人神经胶质纤维酸性蛋白(GFAP)ELISA试剂盒厂家】
9016151 #App. Package, M48, Pathology CNY
9019179 Opto - plate lock closed, PyroQ96MD CNY
9011883 Upgrade, high speed pipetting system CNY
9011882 Back unit, BR9600 CNY