Plastic polymer material expansion coefficient testing apparatus

GCPZY-100塑料高分子材料膨胀系数测试仪

GCPZY-100 plastic polymer material expansion coefficient testing apparatus

产品概述：

Product overview:

该装置用于测试橡胶,塑料等高分子材料在一定温差下测量长度的变化值，由此可计算其一定温度下的平均膨胀系数，参照国标：GB1036-2006测试方法。

The device is used for test of rubber, plastic ａnd other polymer material measuring length changes in a certain temperature difference value, which can calculate the average expansion coefficient, the temperature of the reference standard test method for: GB1036-2006.

一，塑料高分子材料膨胀系数测试仪主要技术参数：

The main technical parameters, expansion coefficient testing instrument plastic polymer materials:

1 炉温：室温-1000℃。

The 1 highest temperature: room temperature -1000 ℃.

2 升温速度，实验过程控制参数，含PID参数。

2 the heating speed, the experimental process control parameters, including PID parameters.

⑴由智能仪表实现全过程任意调节、设置、锁定。操作见仪表说明书。

⑴ by the intelligent instrument to realize the whole process of arbitrary regulation, setting, lock. See the manual operation instrument.

⑵提供由上位机（计算机）接口，可实现在线检测。

The provided by the host （computer） interface, can realize online detection.

3 电源电压：220V±10﹪，50HZ

The 3 power supply voltage: 220V ± 10, 50HZ

4 恒温水槽温度可达100度，加热功耗≤2KW

4 constant temperature water tank temperature can reach 100 degrees, the heating power ≤ 2KW

5 膨胀值测量范围与误差：0－－5㎜±0.1%

The 5 expansion value measurement range ａnd error: ± 0.1% 0－－5 mm

6 控温精度：±0.1℃ 温度记录值误差≤±0.5﹪

Temperature control accuracy: 6 ± 0.1 ℃ temperature record value error less than ± 0.5

7 测量膨胀值分辨率：1um

7 measuring the expansion value resolution: 1um

8．测量容积1.8升，不锈钢真空保温。可装低温液体进行低于环境温度的线膨胀系数测试试验。

8 measurement of the volume of 1.8 litres, stainless steel vacuum insulation. Can be installed in cryogenic liquid is lower than the environment temperature linear expansion coefficient test test.

9．测试容积温度检测：*小分辨：0.1℃

The 9 test volume temperature detection: the minimum resolution: 0.1 ℃

10．测试架石英管，以及石英外管，石英活塞顶杆

The 10 test frame quartz tube, quartz tube, quartz rod, piston top

11．样品大小：50长*20宽*3—6厚（mm）

11 sample size: 50 maximum length *20 width *3 6 thickness （mm）

12．测试系统满足标准：GB/T 20673-2006,GB1036-89 塑料线膨胀系数测试定方法的技术要求和精度要求。

12 test system meet the standards: GB/T 20673-2006, GB1036-89 plastic linear thermal expansion coefficient of the technical requirements of test method ａnd the precision requirement.

13．采用石英标样标定仪器系统

13 using quartz calibration instrument system standard sample

二，塑料高分子材料膨胀系数测试仪产品配置：

Two, plastic polymer material expansion coefficient product testing instrument configuration:

测试主机一台，

A test mainframe,

低温水槽一台；

Cryogenic tank a;

测试软件一套，

A set of test software,

计算机一台，

A computer,

标样一个，

Standard sample a,