请登录 免费注册

热搜:通用机械五金工具仪器仪表安防监控

频道
通用机械 电子元器件 行业设备 五金工具 电工电气 仪器仪表 安防监控 专用汽车 照明灯具 化工原料 涂料 塑胶 建筑原料 皮革 冶金

您的位置:首页 > 公司动态 >北京四季畅想科技有限公司 >Phoenix Contact 2866404 TRIO-PS/3AC/24DC/40 TRIO POWER 初开关模式 DIN导轨式三相24V DC/40 A 菲尼克斯电源2866239 QUINT-DC-UPS/24DC/20 菲尼克斯不间断电源2320238 QUINT-UPS/ 24DC/ 24DC/20 菲尼克斯不间断电源

公司动态

标题Phoenix Contact 2866404 TRIO-PS/3AC/24DC/40 TRIO POWER 初开关模式 DIN导轨式三相24V DC/40 A 菲尼克斯电源2866239 QUINT-DC-UPS/24DC/20 菲尼克斯不间断电源2320238 QUINT-UPS/ 24DC/ 24DC/20 菲尼克斯不间断电源

发布时间:2022/4/3  来源: 北京四季畅想科技有限公司   阅读次数:265        

Phoenix Contact  2866404  TRIO-PS/3AC/24DC/40  TRIO POWER 初开关模式 DIN导轨式三相24V DC/40 A 菲尼克斯电源2866239  QUINT-DC-UPS/24DC/20 菲尼克斯不间断电源2320238 QUINT-UPS/ 24DC/ 24DC/20 菲尼克斯不间断电源Phoenix Contact菲尼克斯电源,菲尼克斯继电器,菲尼克斯交换机,菲尼克斯工具,菲尼克斯防雷,菲尼克斯连接器,菲尼克斯模块,菲尼克斯控制器,菲尼克斯路由器,菲尼克斯断路器,菲尼克斯I/O模块,菲尼克斯信号隔离器,菲尼克斯接线端子,菲尼克斯电源和UPS菲尼克斯快充系列,菲尼克斯浪涌保护器,菲尼克斯插线板等整机及配件批发TEL:13910098771

2320238 QUINT-UPS/ 24DC/ 24DC/20 导轨式不间断电源TEL:13910098771







DIN RAIL MOUNT UPS PHO2320238 130x125x40mm 20A 24VDC

 

Contents: 1 DIN RAIL MOUNT UPS

o Model Number: PHO2320238 

o Degree of protection (IP): IP20

o Depth: 125 mm

o Height: 130 mm

o Mounting method: DIN rail

o Nominal current: 20 A

o Rated voltage: 24 V

o Width: 40 mm

2866239  QUINT-DC-UPS/24DC/20 不间断电源2320238 QUINT-UPS/ 24DC/ 24DC/20 不间断电源TEL:13910098771






Quint-DC-UPS/24DC/20 Power Supply 2866239 Input 24VDC/22A


Quint-DC-UPS/24DC/20 Power Supply

2866239

Input 24VDC/22A

Operational Voltage 22.5-30VDC

Output 24VDC/20A

 

Quint DC-UPS 20 A


2866404  TRIO-PS/3AC/24DC/40  TRIO POWER 初开关模式 DIN导轨式三相24V DC/40 A 开关电源2866239  QUINT-DC-UPS/24DC/20 不间断电源2320238 QUINT-UPS/ 24DC/ 24DC/20 不间断电源TEL:13910098771






 

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) 95 % (at 25 °C, non-condensing)
Noise immunity EN 61000-6-2:2005



Input data

Input voltage range 3x 320 V AC ... 575 V AC

2x 360 V AC ... 575 V AC (for 2-phase operation)
AC frequency range 45 Hz ... 65 Hz
Current consumption 3x 2 A (400 V AC)

3x 1.6 A (480 V AC)
Inrush surge current <20 A
Power failure bypass > 16 ms (400 V AC)

> 20 ms (480 V AC)
Required backup fuse (device and line protection) (externally via 3 10 A or 16 A circuit breakers, characteristic B)
Power factor (cos phi) 0.76
Type of protection Transient surge protection
Protective circuit/component Varistor



Output data

Nominal output voltage 24 V DC ±1%
Setting range of the output voltage 22.5 V DC ... 29.5 V DC (> 24 V constant capacity)
Output current 40 A (-25°C ... 55°C)
Derating 55 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series Yes
Max. capacitive load Unlimited
Current limitation Approx. 48 A
Control deviation <1 % (change in load, static 10 % ... 90 %)

<2 % (change in load, dynamic 10 % ... 90 %)

<0.1 % (change in input voltage ±10 %)
Residual ripple <20 mVPP
Peak switching voltages nominal load <40 mVPP
Maximum power dissipation NO-Load 16 W
Power loss nominal load max. 91 W



General

Net weight 2.9 kg
Operating voltage display Green LED
Efficiency > 91.5 % (at 400 V AC and nominal values)
Insulation voltage input/output 4 kV AC (type test)

2 kV AC (routine test)
Protection class I (with PE connection)
MTBF (IEC 61709, SN 29500) > 930000 h (According to EN 29500)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Low Voltage Directive Conformance with LV directive 2006/95/EC
Standard – Electrical equipment of machines EN 60204
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage EN 60950-1 (SELV)

EN 60204 (PELV)
Standard - Safe isolation DIN VDE 0100-410

DIN VDE 0106-1010
Standard – Protection against electric shock DIN 57100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment DIN VDE 0106-101
Standard – Limitation of mains harmonic currents EN 61000-3-2
UL approvals UL/C-UL listed UL 508

UL/C-UL Recognized UL 60950
Surge voltage category III



Connection data, input

Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 4 mm²
Conductor cross section AWG/kcmil min. 22
Conductor cross section AWG/kcmil max 10
Stripping length 8 mm
Screw thread M3



Connection data, output

Connection method Screw connection
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 16 mm²
Conductor cross section stranded min. 0.5 mm²
Conductor cross section stranded max. 10 mm²
Conductor cross section AWG/kcmil min. 8
Conductor cross section AWG/kcmil max 6
Stripping length 10 mm



Signaling

Status display "DC OK" LED green
Note on status display UOUT > 21.5 V: LED lights up


2910587  ESSENTIAL-PS/1AC/24DC/240W/EE 输入:1相,输出:24 V DC / 240 W  DIN导轨安装的ESSENTIAL POWER电源,工业电源,继电器,交换机,工具,防雷器,连接器,模块,控制器,路由器,断路器,I/O模块,信号隔离器,接线端子,电源供应器和UPS,快充系列,浪涌保护器,插线板等整机及配件批发TEL:13910098771

为您推荐

猜你喜欢

版权声明

凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内

使用,并注明"来源:易推广"。违者本网将追究相关法律责任。

本信息由注册会员: 北京四季畅想科技有限公司 发布并且负责版权等法律责任。

最新产品 - 今日最热门报道-分类浏览 - 每日产品
  • 易推广客服微信