您的位置:首页 > 产品展厅 > 仪器仪表 > 流量仪表 > 其他变送器 > PMT系列尘埃浓度变送器
产品名称: PMT系列尘埃浓度变送器
产品型号: PMT
Service: Aircompatible gases, any type particulate conductive or nonconductive.
Wetted Materials: 304 SSPTFE.
Air Velocity Range: 300 ft/minhigher.
Minimum Detection: Standard: 10.0 pA, Optional: 5.0 pA0.5 pA.
Temperature Limits: Ambient: -15 to 160°F (-25 to 70°C); Process: Standard: -40 to 250°F (-40 to 120°C); Optional: -40 to 450°F (-40 to 232°C).
Pressure Limit: 10 psi (0.69 bar).
Power Requirement: 18-28 VDC (24V Nominal).
Output Signal: 4-20 mA.
Loop Resistance: 300 Ohms maximum.
Current Consumption: Powered from 4-20 mA loop.
Electrical Consumption: Terminal Block.
Process Connection: See Model Chart on Ordering Page.
Enclosure Rating: Weatherproof, NEMA 4X (IP 66).
Mounting Orientation: Any.
Weight: Varies with length of probetype of mount.
Agency Approvals: CE Ordinary locations only, CSA
选型表
Example | PMT | A1 | 1 | T1 | P1 | 1 | L1.5 | PMT-A11T1P1-L1.5 Particulate Transmitter, ordinary/general purpose locations, CE approval, NEMA 4X, CSA, , 1/2" NPT connection, 250°F max. temp., 10 psi max. pressure, 10.0-5000 pA, 1.5" probe. |
Series Designator | PMT | | | | | | | PMT Particulate Transmitter (1-piece configuration, sensor included in price) |
Enclosure Rating | | A1 AHZ2 | | | | | | Ordinary/General Purpose Locations, CE Approval, NEMA 4X, CSA Hazardous Location, CSA Approval, Class I, Division II, Groups A-D; Class II, Groups F,G |
Process Connection | | | 1 2 3 4 | | | | | 1/2" NPT 1.5" Sanitary Connection 2" 150# ANSI Flange 2" 150# ANSI Flange with Process Mating FlangeInstallation Kit. |
Maximum Process Temperature | | | | T1 T2 | | | | 250°F (121°C) 450°F (232°C) |
Maximum Process Pressure | | | | | P1 | | | 10 psi |
Range | 1 2 3 | 10.0-5000 pA 5.0-5000 pA 0.5-5000 pA (required for low levels or EPA leak detection) | ||||||
Insertion Length (recommended at least 1/2 duct diameter) | | | | | | | L1.5 L03 L05 L10 L15 L20 L30 L36 | 1.5" Probe |
① 凡本网注明"来源:易推广"的所有作品,版权均属于易推广,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内
使用,并注明"来源:易推广"。违者本网将追究相关法律责任。② 本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此 类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用 ,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为放弃相关权利。
④易推广页面显示产品信息均由企业自主发布,信息内容真实性、准确性与合法性由相关企业负责,易推广对此不承担任何责任,如遇非法或侵权信息欢迎监督,请联系QQ:1273397930或者发邮件至:1273397930@qq.com,如有确实证件证明属实,本站将对其删除处理,谢谢!
⑤ 本信息由注册会员:深圳市德威达科技有限公司发布并且负责版权等法律责任。
易推广客服微信