您最近阅读过的产品

长途遗体运输车

产品展示

您的位置：首页 > 产品展厅 > DNP COLOR VIEWER CCV-31F,CCV-51F

DNP COLOR VIEWER CCV-31F,CCV-51F

价格：电议
型号：CCV-31F,CCV-51F
生产地：Japen
访问：354次
发布日期：2009/11/2(更新日期：2009/6/16)

苏州方特电子科技有限公司

提示：如果您未采购满意的产品，请在网页头部搜索更优质的产品

在线咨询进入厂商展台通过微信查看供应商电话

产品展示

The DNP Standard color Viewer,CCV31F,CCV51F,并提供维修服务!

详细内容
公司简介

Specification

Light source:	DNP Standard color Viewer lamp （Four 10W dedicated fluorescent tubes are used）
Power supply:	AC100V 50, 60Hz
Lighting method:	High Frequency lighting method 20KHz
Color rendering:	Over 90% rendering evaluation-point for each color
Color temperature:	（Measured by Minolta CL-200）
Operating temperature:	10～40℃
Operating humidity:	Below 80%（avoid dew）
Major diameter dimension:	375W×365H×165D m/m
Luminance plane dimension:	250W×190H m/m
Color chart dimension:	320W×290H m/m
Power consumption:	80W
Weight:	6.5kg/7.5kg

CCV-31F
CCV-51F

CCV-31F/G
CCV-51F/G

●The Luminance plane characteristics: according to the types of self-contained fluorescent lamp

Product Type	Luminance Color Temperature	Lamp	Color Temperature	Luminance	Color matching shift	Weight
CCV-31F	Fixed	FL10WW-DLB	3100K±300	Over 1300cd/m²	Within 10%	6.5kg
CCV-51F	Fixed	FL10D-EDL-56K	5100K±300	Over 1400cd/m²	Within 10%	6.5kg
CCV-31F/G	Volume adjustable	FL-10WW-DLB	3100K±300	Over 850～1300cd/m²	Within 10%	7.5kg
CCV-51F/G	Volume adjustable	FL10D-EDL-56K	5100K±300	Over 850～1400cd/m²	Within 10%	7.5kg

＊The color temperature if Luminance. Color Temperature Conversion Type viewer ranges over 50k according to the change of the Luminance.
＊The specification may change without notice

Operation Manual

【1】	Before using the product:

	Power supply	AC 100V, 50/60Hz shared
	Light source	10W DNP Standard color Viewer Lamp （4）
	Power consumption	80W

【2】

Using the DNP Standard color Viewer

（1）

Plug the power cable of the product into AC100V

【Precautions】

Do not connect any power supply other than AC100V
If the other power supply connected by accident, the inverter inside will burned out

（2）

Turn on the power switch

（3）

Lamp lights: the lamp light will stabilised after 15 to 20 minutes at the room temperature（20℃）

（4）

If the lamp does not lit, call for Service Office for the confirmation as described on other documents.

（5）

To suspend snaking of the lamp, press power switch 3 to 4 times [as ON/OFF].

【3】

If the light does not lit

Call for Service Office to confirm the following:

（1）

AC 100V supplied to the wall socket.

（2）

Plug the product into the wall socket.

（3）

Turn the power supply switch of the product ON

Still the lamp does not lit: Consider the following:

（1）

Two of the viewer lamps lit simultaneously, one of the fuses of the inverters has blowouts.

（2）

Four of the viewer lamps does not light means that each of the fuses of the two inverters has blowouts.

【Precautions】

The above occurs if the applied power supply is not AC 100V.
Fuse bum out cause internal burnout of inverter. The burned inverter needs to replace.

【4】

How to replace the lamp ａnd keep it clean

Place the Viewer on the flat table, ａnd plug out the power supply cable from the wall socket.
Remove the used device in the following order:

（1）

Unfasten the two of grub screws on the top frame.

（2）

To remove the top frame from the main unit;
Holding 50 to 60 mm the grub screw of the top frame ａnd press it forward.

（3）

Remove the glass plate ａnd acrylic plate.

【Precaution】

Glass plate easily breaks ａnd may hurt your hands ａnd fingers.
Handle the edge of the plate with care not to scratch.

◆Replacing the lamps:

（1）

When the lamps used over 2,000 hours or one year, it needs to replace.

（2）

Remove the Lamp Tubes: Hold the edge of the Lamp Tubes, ａnd turn it 90 degree.

◆Cleaning the device:

（1）

Impregnate alcohol to gauze then apply it onto the surface of the reflection plate / acrylic plate / glass surface to remove the dirt.

（2）

Clean the device once in six months to one year to keep quality of the Color Temperature ａnd Luminance.

【5】	Other Precautions

	Handling the viewer needs the following precautions because it contains the parts using glass.
	（1）	Do not add strong impact on the viewer
	（2）	Do not put any heavy items on the surface of the viewer

产品留言

公司同类产品

标板

ISO15739测试标板

更多详细>>
Q14色卡

kodak Q14

更多详细>>
Colorchecker

24色ColorChecker

更多详细>>

版权说明

① 凡本网注明"来源：易推广"的所有作品，版权均属于易推广，未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品，应在授权范围内

使用，并注明"来源：易推广"。违者本网将追究相关法律责任。

② 本网凡注明"来源：xxx（非本网）"的作品，均转载自其它媒体，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责，且不承担此类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用，必须保留本网注明的"稿件来源"，并自负版权等法律责任。

③ 如涉及作品内容、版权等问题，请在作品发表之日起两周内与本网联系，否则视为放弃相关权利。

④易推广页面显示产品信息均由企业自主发布，信息内容真实性、准确性与合法性由相关企业负责，易推广对此不承担任何责任，如遇非法或侵权信息欢迎监督，请联系QQ：1273397930或者发邮件至：1273397930@qq.com，如有确实证件证明属实，本站将对其删除处理，谢谢！

⑤ 本信息由注册会员：苏州方特电子科技有限公司发布并且负责版权等法律责任。

相关分类

相关标签

您最近阅读过的产品

产品展示

DNP COLOR VIEWER CCV-31F,CCV-51F

苏州方特电子科技有限公司

产品展示

您可能感兴趣

产品留言

公司同类产品

版权说明