100KW微波发生器

--100KW磁控管的供电部分组装于一个由三个串联的单位开关柜,规格为:长＊宽＊   高:2200＊800＊1800mm,柜的底座高100mm.
--控制方式为: Inductive supply (traditional linear supply).
 --Power Input: 380VAC,3-phase,50Hz.
 --Power Output: 100KW continuous duty (24hrs/day).
 --Operating Frequency: 915MHz+/-15MHz.
 --Power Control Range: Continuous from 10KW to 100KW，大功率磁控管的最低功率只能达到额定功率的10%左右，这是由磁控管的工作特性而决定的.
 --Magnetron Protection: A 3-Port ferrite circulator with water load protects the magnetron during high-reflected power periods.
 --Arc Detection: Photoelectric Arc detection to protect magnetron and Wave-guides.
 --Output Fitting: WR-975 (or R9) Wave guide EIA Flange.
 --Cooling: clean plant water, maximum temperature 30°c,pressure min.6 bar.
 --Documentation: The equipment will be delivered with Operating and Maintenance Manual, including Electrical Circuit Diagram and Replacement Parts List.